Only show results available in Virginia? Ok

Energy from Wood Applications

  • Wood Cogeneration for Rural Communities

    Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    By STELA Laxhuber GmbH based in Massing, GERMANY.

  • Waste shredding for the waste RDF line

    Waste of all kinds is now considered a potential energy source and an important growth market for stationary shredder technology. Most plastic and paper waste RDF (refuse-derived fuel) plants have specific requirements regarding shredding capacity, grain size and operating reliability to ensure reliable and consistent production. Because of its ability to conform to the most stringent guidelines, Metso shredder equipment is increasingly in demand by this sector.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Pellet Classification for the Energy Industry

    Schenck Process provide systems that deal with wood pellets and chips feed solutions in the safest manner by using variable concepts and offering a range of conveying methods to deal with the differing feedstock characteristics. Alternative fuels are either discharged directly from trailers with “walking floors” or are delivered in tipping containers via road or rail. Schenck Process automated extraction screws, chain conveyor or pneumatic conveyors can be used to deliver the appropriate amount of fuel via a weighing check system for boiler feed regulation.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Wood Cogeneration for Farms

    Farming operations that require heat also benefit from the CHP system. The return on investment will vary dependent on whether there is low or no cost access to wood chips and whether the 45 kWh of power can be fully utilized on site or, if not, what rate the power can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Premium

    Solid/liquid separation for environment

    Tight municipal budgets. Water shortages. A need for renewable energy. Today, there is simply no room for waste. Getting the most efficient solid/liquid separation is essential not just to profitability but ensuring sustainable growth.

  • Energy and Fuels from Wood Wastes and Biomass

    Wood wastes include woods from forestry, railways – sleepers, telecoms – telephone poles, timber manufacturing processes and the construction industry. Many of these types of wood tend to be contaminated with chemicals and other materials. This contamination can make the waste wood difficult to use in traditional biomass to energy processes and potentially hazardous to the environment. Our Gasplasma® energy from waste technology is able to transform efficiently the organic biomass into a pure, hydrogen-rich synthesis gas and safely destroys any harmful or hazardous inorganic chemicals. All inorganic materials are made inert and vitrified into an environmentally benign product called Plasmarok® which can be sold as an aggregate for construction, generating a revenue stream.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Premium

    Industrial shredders system for wood inddustry

    It’s more than just wood!  It is an invaluable sustainable resource which can be utilised down to the last splinter. With WEIMA wood shredders there are no limits. Woodchips can be used directly for energy generation or for briquetting. Valuable space can be saved for more productive uses. WEIMA has the know-how covering all the relevant factors for a most efficient and homogenous wood shredding solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Carbon Monoxide and Carbon Dioxide Sensing for Gasification

    Application: Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide and Hydrogen, which amount for around 85% of Syngas, and it is produced by a process called Gasification.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Harden Shredding Technology for Pulper Ropes

    Harden Shredding Technology for Pulper RopesHarden Industries Ltd. designs and manufactures a variety of high-capacity shredding solutions specially suited for paper shredding and pulp mill materials processing. With Harden’s low-speed, high-torque technologies, pulp and paper mills are able to increase overall mill efficiency by reducing waste volume and lowering fuel, storage and transportation/disposal costs. Paper & Pulp Mill Materials Processed Rag rope Baled corrugated (old corrugated containers) or old newsprint. Pulper waste Paper rolls/fiber cores Wire Slabs Pallets Packaging materials (shrink wrap, banding, etc.) Scrap raw fibers and wood Typical Shredding Applications 1. Pre-Incineration Shredding Shredded paper is easier to handle and meter-feed into an incinerator and burns more thoroughly and rapidly. 2. Fuel Preparation Shred in-plant waste into cost-effective boiler fuel 3. Bale Breaking or Preprocessing Shredding bales prior to pulping delivers consistently sized

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Wood Cogeneration for Greenhouses

    Greenhouse operations have been early adopters of the CHP system given their operation’s need for heat. The return on investment is dependent on the regional rate for selling the power to the grid and also the utilities saved from CHP heat.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Organic Rankine Cycles for Biomass Combustion

    The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.

    By Tri-O-Gen B.V. based in Goor, DE, NETHERLANDS.

  • RTO (Chemical) Industries Waste, Paint, Wood chip and

    Our company Honeycombs Ceramics B.V. supports installations used for RTO (Regenerative Thermal Oxidizer). These gas (waste) installations use ceramic beds of blocks to cool released hot gasses. This is one of the most important processes within the installation. Honeycombs Ceramics B.V. is established in Europe and China. This global connection makes us unique, it takes one contact to make RTO business a low-cost and durable business. Our lines are short, we are always available, and both countries have sales offices and warehousing. Core feature: Efficiency. The way you do business with RTO providers can be converted to a more simple, safe and secure way. By giving you the opportunity to choose how, when and where. Our companies in the Netherlands and China have professional sales teams. And their goal is to assist you. You can decide which office to contact. 24/7. Our production in China is under strict policy of quality control. We have inspectors in China and the Netherlands who both follow strict instructions to meet our high standards. These standards are measured and recorded by SGS every year. Pricewise we offer high quality for low pricing. Next to quality, there is warehousing. Our warehousing is extensive, with supervision of quality- and logistic managers. Also, there is the opportunity to keep stock in both countries. We understand the importance of availability when needed. Whether this is emergency, temporary, or for quantities based on a turn around. Based on all input from customers and opportunities in RTO business, we innovate and make possibilities work. In short; no fuss, that's us.

    By Honeycombs Ceramics BV based in Sassenheim, NETHERLANDS.

  • Gas measurement for the pulp & paper industry

    The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements for the harsh environment of a recovery boiler facility, without restricting airflow even in short run ducts.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Pyrolysis oil to diesel

    Pyrolysis oil to diesel continuous waste pyrolysis oil to diesel Solution: Oil refining machine Applicable: Tire oil, Plastic oil, Waste oil, Pyrolysis oil,Engine oil, Black oil, Heavy oil, etc Output: 85-90% good clean oil, the rest is slag and waste gas Heating fuel: Coal / wood/ fuel oil / gas Oil refining machine land size: 20X15m Reactor material:Q245/ Q345 Boiler plate

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Reliable Shredding Technology for Waste Wood Recycling Industry

    Waste wood is a precious resource that is available in large volumes and may be used either for material recycling or energy production, depending on the quality grade. The rising cost of waste material disposal and a growing consciousness for the environment also contribute to the increasing importance of waste wood recycling. The term “waste wood” includes all woods and wood-based materials that have come to the end of their product lifespan and are thus considered waste.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you