Only show results available in Virginia? Ok

Energy Regulations Applications

  • Pulsair`s industrial mixers for biodiesel fuel industry

    Pulsair Systems manufactures the most efficient and effective storage tank mixing process for blending and agitating biodiesel fuel. The efficient Pulsair mixing process is well suited for the high viscosity and heavy fluid characteristic of biodiesel. Pulsair offers a complete line of off the shelf biodiesel fuel mixers and agitators for mixing in a 55-gallon drum or larger 250 - 1 million+ gallon tanks for biodiesel fuel storage or production. Pulsair biodiesel fuel mixers are explosion proof and safe for biodiesel mixing. Biodiesel is a flammable product and the fire risks are reduced when using the Pulsair mixing process because our mixers do not require electricity at the mixing site. This improves the overall safety of the biodiesel production process and biodiesel fuel storage tank mixing and agitation.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Pellet Classification for the Energy Industry

    Schenck Process provide systems that deal with wood pellets and chips feed solutions in the safest manner by using variable concepts and offering a range of conveying methods to deal with the differing feedstock characteristics. Alternative fuels are either discharged directly from trailers with “walking floors” or are delivered in tipping containers via road or rail. Schenck Process automated extraction screws, chain conveyor or pneumatic conveyors can be used to deliver the appropriate amount of fuel via a weighing check system for boiler feed regulation.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Water treatment research for power generation sector

    The power generation sector is the largest industrial user of water in the world, with a need for enormous volumes of water for cooling and ultrapure water to supply boiler systems. Investment in water treatment technologies for this sector is worth $2.1 billion. Rapid industrialisation and economic growth in South East Asia and Sub-Saharan Africa is increasing demand for electricity, requiring significant investment in water technologies. Environmental regulation will push for increased treatment of scrubber wastewater and solutions to reduce the burden that cooling places on the local environment.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm’s relationship with the community and with the local regulatory organizations. 

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Evaporation technology for biogas and biofuels industries

    Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Compliance management software for the energy and utilities industries

    Navigating the increasingly complex regulatory requirements can be tough for energy, oil and gas, and utilities companies. In order to effectively manage risk and stay compliant, organizations must establish proactive policies and have a systematic approach to their contracts.

    By Convergepoint based in Houston, TEXAS (USA).

  • Depuration of oil and emulsion mists

    In machine shops, where the production is centered on the use of machine tools, one of the most common problems is the restoration intervention aimed at limiting the presence of oil or emulsion fogs. As a matter of fact, since machine tools work at very quick production rhythms, they widely use lubricating fluids such as oil or oil emulsions and water.

    By GGE srl based in Rio Saliceto, ITALY.

  • Organic Micro-Pollutants Removal

    Organic Micro-pollutants are low and trace levels of synthetic organic substances released in water through human activity. They can be found in industrial, agricultural and domestic wastewater streams. Some of the most difficult-to-treat wastewater contains micro-pollutants such as persistent organic pollutants (POPs), herbicides and pesticides, personal care products (PCPs), toxic chemicals, carcinogenic and endocrine disruptive compounds (EDCs), and emerging contaminants.

    By Arvia Technology based in Runcorn, UNITED KINGDOM.

  • COD Reduction

    Chemical Oxygen Demand (COD) is used as a measure of organic pollutants in water. In wastewater treatment, it indicates the efficacy of a treatment process and is expressed in milligrams per litre (mg/L) or parts per million (ppm). Removing certain fractions of COD in waste streams can be particularly challenging, especially to levels safe for discharge to the environment.

    By Arvia Technology based in Runcorn, UNITED KINGDOM.

  • Premium

    Sustainable solutions for food, beverage and agriculture industry

    The long-term well-being of people worldwide depends on agricultural production systems that can maximise resources without depleting them. The demand for more sustainable agriculture comes from a well-informed public as well as companies all along the supply chain, increasing the pressure to improve very complex systems without decreasing output.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Strategic market research solutions for hydropower & renewable energy industry

    Bringing together the world’s most respected renewable energy information resources under one roof, PennWell dominates the market with an unparalleled network of publications, events and websites. Get news and information in both digital and print format, participate in trade show and conference events worldwide, understand global markets and discover expert resources for technology, finance, and policy knowledge.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Evaporation technology for power industry

    EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Water Treatment Equipments for Power Industry

    Drought in association with competing uses for clean water are continuing to challenge power generation facilities worldwide. In addition to this fact, power generation companies face additional challenges including finding innovative ways to be more operationally efficient while meeting tighter environmental standards and regulations.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • EHS & sustainability solutions for the power & utilities industry

    Helping power and utilities industry decision-makers navigate government regulations and develop successful strategies through information and insight. For decades, the EHS and sustainability professionals at IHS have been serving organizations of all kinds and sizes worldwide. We were pioneers in the development of many sustainability information management solutions and continue to lead the way today with new innovations.

    By IHS based in Englewood, COLORADO (USA).

  • Residential Solar

    According to Turkey's government regulations, residential systems up to 50 kW do not require a license. In a country that lacks an abundance of conventional energy sources, these residential regulations represent a great opportunity for homeowners. All residential renewable energy systems, below and above 50 kW, can both use the electricity produced and sell the surplus back to the electrical grid. These systems can be categorized into three groups: on-grid, off-grid and hybrid.

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Waste gas treatment for the semiconductor industry

    In the early 1990s no appropriate and comprehensive technical solution had been available for waste gas treatment in the semiconductor industry. Back then as well as today many industrial and research production procedures use process gases and generate waste gases. These waste gases, considered greenhouse gases, are toxic and/or highly flammable and very often pose a significant risk to production facilities and the environment. The semiconductor industry, for instance, uses perfluorocarbons, whose global warming potential is extremely high and therefore requires an efficient waste gas treatment. Combining and transporting different gases into a fab’s central waste gas system might produce highly flammable and highly explosive gaseous mixtures, which in the past has occasionally caused the total loss of entire production facilities. Particles contained within gases may also cause exhaust blockages. To eliminate these risks, process waste gases need to be treated at the “Point-of-Use” (POU) where harmful exhausts are abated immediately.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you