Only show results available in Virginia? Ok

Flares Applications

  • Flaring Solutions for Gas Processing Facilities

    ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Production (Enclosed Combustors)

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Air pollution control for the petroleum processing and petrochemical industries

    The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Odor control solutions for solid waste industry

    Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Premium

    Industrial air pollution control for the oil and gas

    Few industries attract the attention of the public as does the oil & gas industry with its related strategic products (basic materials for the chemical, pharmaceutical, varnish and cosmetics industries). The bringing of oil and gas from their original sources to the consumer, into their final forms, represents one of the most complex chains in the quest to add value to raw materials.

  • Flaring Solutions for the Mine Gas Industry

    ABUTEC manufactures and services low emission, low NOx mine gas incinerators (i.e. enclosed flares) for the mine gas industry. We specialize in offering compact solutions and price competitive equipment, whether you are upgrading due to new regulations, evaluating a gas-to-energy project or looking for a green technology to take advantage of tax credits. We specifically size and design for your unique mine gas needs with flares ranging in size from 10 SCFM up to 6,000 SCFM. All ABUTEC flares and solutions meet or exceed EPA regulations and are BACT-approved. ABUTEC installed the first mine gas incinerator in the U.S. and is the only company to provide proven carbon credit solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Petrochemical & Refinery Industry

    ABUTEC’s goal in the petrochemical and refinery industry is to save you money. ABUTEC’s vapor combustor and enclosed flare line offers flexible and resilient burner technology to handle heavy hydrocarbon gases down to low quality or inert gases. We will save you money on capital costs and we will offer you a very fast payback (as low as 2 months) based on reducing the amount of make-up fuel and pilot gas required. This revolutionary technology is designed for you!

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Flow meters solutions for petrochemical sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flaring Solutions for the Landfill Industry - Leachate Evaporation

    Increased concern for the environment has led to new opportunities for landfills to better manage their waste gas. ABUTEC works with the landfill industry to ensure that leachate evaporation is handled in the most efficient way possible. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning landfill waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. When combined with a heat exchanger, the unit can efficiently evaporate the leachate eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Midstream Oil and Gas industry

    At ABUTEC, we understand the unique challenges that accompany transporting oil to refineries. Among those challenges is environmental responsibility to the communities in which oil and gas companies operate. Our enclosed combustors meet or exceed increasingly stringent state and federal regulations and allow companies to operate in extreme conditions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flare gas measurement flow for solutions

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flaring Solutions for the Landfill Industry - Landfill Gas Combustor

    As the need for reliable alternative energy sources increases, industries all over the world are looking for ways to fuel business while having the smallest impact on the environment. At ABUTEC, we’re proud to be part of this shifting focus on alternative energy sources, and offer solutions for waste-to-energy systems that can put waste gas to work for your plant.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the CDM + Kyoto Protocol

    ABUTEC specializes in providing advanced technology for the CDM initiative and for carbon credit projects in the landfill and waste water industries. The Kyoto Protocol is an international agreement linked to the United Nations Framework Convention on Climate Change, which sets internationally binding emission reduction targets. There are three mechanisms within the protocol, one being the Clean Development Mechanism (CDM). A CDM project must provide emission reductions that are additional to what would otherwise have occurred.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Flaring Solutions for Ethanol Loadout

    ABUTEC’s proprietary technology was designed to provide cost competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a 33% reduction in make-up fuel over premixed surface combustion systems or traditional nozzle burners. In addition, we meet state and federal requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology). Whether you are looking for vapor combustors, enclosed flares, ethanol loadout flares, truck loadout flares, loading terminal flares, emergency flares, or marketing terminal flares, contact us for reliable, safe solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

    Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Flow meters solutions for oil & gas sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you