Flares Articles

  • Stacking up: flare Monitoring from LumaSense

    Lenny Shaver, LumaSense Technologies’ director of product management, explains the company’s IR and pyrometer technologies FLARING systems are common in many industries to burn gases before they enter the atmosphere. The safe operation of a flaring system requires the continuous monitoring of pilot flames and flared gases to ensure that vented gases are ignited. As ...

  • STOP-FYRE – Saving Your Back

    Jeff Tuma of Montgomery, MN has STOP-FYRE now, which is a good thing. This year at Farmfest, Jeff told us how he used STOP-FYRE to save his backhoe. “If I could tell people anything,” Jeff saif, “it would be to invest in fire protection. It might be more money, but it’s worth ...


    By AKE Companies, LLC

  • Performance of the low-emission flare

    Job report / Elbisgraben (Bale / Switzerland) The summer of 1992 had finally arrived. The 5MW low emission furnace in the district heating station Liestal was ignited, supplied with landfill gas from Elbisgraben landfill. Since then the plant has been running continuously and the comprehensive measurements taken, verify that all targets aimed at have been achieved: plant ...


    By Hofstetter BV

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Case study - LFG pumping trials with Automatic Flare Systems (AFS)

    Application Landfill gas Equipment GA3000 Location United Kingdom Customer Automatic Flare Systems (AFS) Requirement Managing director at AFS, Steve Willacy said, “We want continuous landfill gas monitoring and analysis and to use a data logger to ...


    By Geotech

  • The Goldilocks of Combustion Solutions

    It’s not too big, it’s not too small… It’s just right! We hear it all the time from our customers: “The ABUTEC 200 is too small for our site, but the HTF is too large. Can you create a custom unit?” The answer sometimes surprises those customers. While yes, we can certainly develop a custom unit just for your site, a more efficient (and cost-effective) ...


    By ABUTEC LLC

  • Greenstars portable monitoring for CHP and flares case study

    Greenstar's award-winning KTK landfill site in Kilcullen, Co. Kildare, is unusual in Ireland in that it has three gas engines feeding electricity to the grid and two flares. In Ireland, while flaring is common, engines are not. The flares are run in tandem with engines so that if an engine is ramped down for repair or service, the flare ramps up automatically. All are supplied by 122 landfill gas ...


    By Geotech

  • Case study - LFG engine protection for Viridor

    Rapid changes in landfill gas quality can damage the engines it powers. To keep watch, Viridor has installed static automatic gas analysis and reporting equipment supplied by Geotech at its Whitehead landfill site near Manchester. Every ten seconds the equipment measures concentrations of CH4, CO2 and O2 and outputs the data in three, 4-20 mA channel signals. Control circuits receive the ...


    By Geotech

  • AEMS signals methane concentration for Landfill Systems case study

    Application Landfill - power generation Equipment AEMS and GA3000 Location United Kingdom Customer Landfill Systems Requirement Landfill Systems needed a fixed gas analyser with telemtery for landfill gas power generation. ...


    By Geotech

  • CDM monitoring & reporting for carbon credits case study

    Abridged from a Wastecon 2008 Presentation and Paper by Mitchal L. Cassel LANDTEC, Colton, California The project sites The project is in Brazil and obtains certified emission reductions (CER) or carbon credits for a large scale, waste handling and disposal, clean development mechanism (CDM) project. Methane emissions are being reduced through collection and destruction of ...


    By Geotech

  • Tronox Namakwa sands furnace Gas CHP Plant - Case Study

    Tronox is the largest fully integrated producer of titanium ore and titanium dioxide in the world. The Tronox Mineral Sands cogeneration power generation plant, located in the Western Cape, uses the waste gas from two open arc DC furnaces as an energy source. The gas engine power plant operates on waste gas ...


    By Clarke Energy

  • ABUTEC Navigates to U.S. Coast Guard Certification - Case Study

    ABUTEC has carved a niche in the midstream oil & gas sector by providing turnkey Marine Vapor Control System (MVCS) solutions. But what if your site needs a custom solution? ABUTEC recently created a custom solution for Targa Resources to aid in flaring during the barge offloading process. Targa Resources, located in Channelview, Texas, is a provider of midstream services to North America. ...


    By ABUTEC LLC

  • Up in Smoke – How the climate and our health suffer from flaring

    It’s like burning banknotes. Latest statistics from the World Bank (WB) indicate that the amount of gas flared each year is enough energy to supply electricity to several small countries or many millions of households. The flaring of 140 billion cubic metres (bcm) a year releases large quantities of greenhouse gases into the atmosphere – and that is not only bad news for the climate, ...


    By GLOBE Foundation

  • Measurement of Sulfur in Refinery Flare Gas Streams for Compliance with EPA SubpartJ(a) Regulations

    The Challenge Measurement of high range and low range H,S in refinery flare gas streams for compliance with EPA regulation NSPS Subpart J(a). The rule has placed an extra investment and operational burden on petroleum refineries to meet the regulatory requirement. AMETEK offers an economical solution to meet the challenge with an emphasis on lower capital and operating cost along with ...

  • Compliance Issues Facing Midstream Production - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. This is good news for the country and our environment. ...

  • Regenerative thermal oxidizer - three canister RTO for tank car loading and unloading terminal

    Epcon is proud to share its case study for the Tank Truck Loading Terminal. The Problem Loading and Unloading Tank Trucks: When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere. The Process Generally speaking, with ...


    By Epcon Industrial Systems, LP

  • Gas Mass Flow Metering - Innovations Promise More Economical Choices- White Paper

    Introduction As the drive towards energy independence in the United States continues at full speed, oil and gas companies are turning to hydraulic fracturing to increase production. Increasingly stringent state and national regulations for flare gas in particular now require the installation of mass flow measurement instruments to measure waste and excess gases burned off as a result ...


    By Sierra Instruments, Inc.

  • U.S. EPA Proposes Substantial Refinery Flare Operating and Monitoring Requirements

    U.S. EPA is proposing to amend the operating and monitoring requirements for flares at petroleum refineries.  The proposed revisions are complex and are far reaching, and if promulgated, will affect all flares at petroleum refineries.  U.S. EPA’s stated rationale for the proposed revisions is that the ...


    By All4 Inc.

  • dismantling joint has a higher tensile and compressive strength

    dismantling jointshave a higher tensile and compressive strength, and it 's soft seal superior performance, easy handling and other functions , is widely used in metallurgy, electric power, chemical , water and sewage treatment and other industries , acting on the valve and pump the connection between the pipes ...

  • Tank Barge Degassing

    The Customer The Company is a premier tank barge operator. They use waterways to transport petrochemicals, pressurized products, black oil products, refined petroleum products and agricultural chemicals from producers to intermediaries to end users. Their operations span the major inland waterway systems of the United States including, the Mississippi River and its tributaries, the Gulf ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you