Only show results in Virginia? Ok

Flue Gas Cleaning Applications

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Continuous emissions monitoring for mining & smelting

    OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust concentrations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Insitu Flue Gas Desulfurization - DeSOx Analyzer

    The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Corrosion-resistant Materials for the Chemical & Petrochemical Processing Industry

    Sauereisen’s diverse line of corrosion-resistant materials stands up to the extreme temperatures, pH levels and physical abuse that are commonly found in chemical and petrochemical facilities. Whether these facilities need protection for secondary containment, flooring, immersion or flue gas environments, Sauereisen has an inclusive product offering to provide the necessary protection and security. Our products have stood up to the challenges in acid plants, refineries, steel pickling lines and precious metals facilities worldwide

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Environmental protection

    Laser Gas measurements Flue gas emissions, HCl, HF, CO, CO2, O2, NH3, NO, NO2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • High-calcium lime slurry for environmental reclamation industry

    Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Agitation and mixing solutions for flue gas desulfurization

    FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants.  The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release.  Governmental regulations by the EPA put limits on the amount of impurities which can be released into the air.   The use of mixers to clean and scrub the flue gas is utilized to help power companies meet permitted limits on the release of controlled substances.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Process Belt Meshes for Belt Filter

    VACUBELT filter belts for belt filters guarantee continuous filtration with high throughput, low residual moisture and optimal results for the filter effect.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Solutions for mercury removal emissions from flue gas streams

    For the removal of mercury emissions from flue gas streams, Calgon Carbon`s specialty PAC products are proven industry performers. These industries include: Coal-fired electric power plants, Cement, Boilers.

    By Calgon Carbon Corporation based in Moon Township, PENNSYLVANIA (USA).

  • Air Pollution Control Solution for the FGD - SO2

    Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Environmental monitoring solution for power plant

    The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Continuous emissions monitoring for mining industry

    Opsis non-contact monitoring solutions are very well suited for applications in the mining Industry, as the flue gas conditions often involve high temperature and high dust concentrations.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Incineration Industry Emissions Monitoring & Analysis

    Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies widely.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Biomass Furnace Dust Filtration

    Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Environmental monitoring solution for cement industry

    Measurement of particulates, SO2, NOx, hydrocarbons and greenhouse gas emissions from the cement manufacturing industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Hydrocyclones for flue gas desulfurization FGD power applications

    KREBS Flue Gas Desulfurization Cyclones: High capacity Krebs gMAX® cyclones for reagent preparation and gypsum dewatering in FGD systems. Our Hydrocyclones and Technequip Knife Gate valves are used in Power Plants around the world.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Combustion gas analysis for the glass industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Lime and Limestone solutions for flue gas treatment

    Carmeuse’s reputation and recognition as a leader in the industry has grown and we have developed strong alliances and relationships with the companies in FGT processes. We offer our customers applications that utilize lime and chemical grade limestone products that provide the lowest overall cost and significant savings.

    By Carmeuse Lime based in Pittsburgh, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you