Only show results in Connecticut? Ok

dry flue gas (Flue Gas Cleaning) equipment

  • Premium

    Multigas Dilution System

    Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient temperature, in order ...

  • Premium

    PCME - Model QAL 182 WS - Particulate Continuous Emission Monitor

    The PCME QAL 182 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets and ...

    By ENVEA based in Poissy, FRANCE. from Particulate CEMS Product line

  • Premium

    ZETIAN Hygronom - Model HM-100 - ( RC) Humidity Analyzer

    Humidity analyzer is also known as moisture or dew point analyzer for measuring pollutant emissions flue gas humidity with wet gas concentration being converted to dry gas concentration, also can be used for industrial on-line moisture monitoring. HM-100 can be installed directly through the flange to the flue or chimney. Signal of ...

  • Premium

    Lime Filtration

    The use of lime for treating flue gases is a proven technology. Flue gas is generated from the thermal treatment process in Energy from Waste plants (EfW) and contains acidic gases such as hydrogen chloride, sulphur dioxide and hydrogen fluoride. The use of lime in the three main flue gas treatment processes of; dry, semi-dry and wet processes ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Pollution Control Systems - Others Product line

  • Premium

    Gasmet - Oxygen Analyzer System

    Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is needed. The measurement is based on sensor technology with a ZrO2 sensor and a microprocessor unit. The analyzer can measure oxygen ...

    By Gasmet Technologies Oy based in Vantaa, FINLAND. from Emission Monitoring Systems Product line

  • Premium

    PCME - Model STACK 181 WS - Particulate Continuous Emission Monitor

    The PCME STACK 181 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets ...

    By ENVEA based in Poissy, FRANCE. from Particulate CEMS Product line

  • Dry Flue Gas Desulfurization (SDR) System

    Ducon supplies Semi-Dry Removal (SDR) type Dry Flue Gas Desulfurization (FGD) Systems as well as Dry Injection type systems. The SDR systems are custom designed to absorb gaseous pollutants utilizing a spray dryer and a baghouse filter. Ducon's specially designed air atomizing nozzles provide the liquid reagent slurry into the spray dryer for high ...

    By Ducon Technologies Inc. based in Farmingdale, NEW YORK (USA). from Dry Collection Technologies Product line

  • Sorbacal - Model HSH - Single-Pass Dry Flue Gas Treatment

    Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

    By Lhoist Group based in Limelette, BELGIUM. from Exhaust Gas Treatment Product line

  • Quasi-Dry Flue Gas Cleaning (Spray Absorption)

    For the quasi-dry flue gas cleaning, suspensions or solutions are distributed in the flue gas flow by means of a spray absorber with rotary distributor or two-component nozzles. The acid flue gas components are absorbed in alkaline droplets with simultaneous water vaporization. For the separation of organic pollutants and heavy metals, an ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Dry Flue Gas Cleaning (Dry Absorption, Conditioned Dry Absorption)

    In the process of dry flue gas cleaning, the flue gas, if necessary, is moistened and cooled upstream of the actual reaction stage. This is done, on the one hand, for protecting the filter (temperature) and, on the other hand (if lime is used), for moistening the flue gas up to the dew point range. In order to bind the pollutants contained in the ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Premium

    Everise - Model EVS-300 - Online VOCs Source Monitoring System

    By adopting advanced GC-FID technology, and using dry flue gas processed by EVERISE professional sampling system, the EVS-300 Online VOCs Source Monitoring system could continuously real-time monitor volatile organic compounds(VOCs) from the pollutant source. The VOCs could be methane and nonmethane total hydrocarbons, benzene, toluene, ...

    By Everise Technology Ltd. based in Beijing, CHINA. from Solutions Product line

  • MET - Advanced Circulating Dry Scrubber Flue Gas Desulfurization (CDS-FGD) System

    Known around the globe for solid and innovative air quality control technologies, MET's advanced circulating dry scrubber flue gas desulfurization (CDS-FGD) system provides the proper chemistry and conditions to simultaneously and effectively absorb sulfur dioxide, acid gases and associated heavy metals. This advanced, multi-pollutant control ...

    By Marsulex Environmental Technologies (MET) based in Lebanon, PENNSYLVANIA (USA). from Other Technology Product line

  • Swenson - Flue Gas Dry Scrubbing Systems (FGD)

    The Swenson Flue Gas Dry Scrubbing System (FGD) is designed to remove sulfur dioxide, hydrogen chloride and other contaminants from flue gas. The FGD system consists of an alkali (Na or Ca) feed preparation, spray dryer, and dry collector (fabric filter or electrostatic precipitator). Alkali feed is atomized by means of a two-fluid nozzle or ...

    By Swenson Technology, Inc. based in Monee, ILLINOIS (USA). from Other Product line

  • Gas Cooling and Drying System for Flue Gas Treatment

    The gas temperature and moisture content is conditioned to the required level by cooling and condensation of the moisture in the gas. Depending on the required conditions air fin gas coolers or chiller systems are used to cool and condense the gas. After cooling/condensation the moisture droplets are removed from the gas with moisture ...

    By Hofstetter BV based in Schiphol-Rijk, NETHERLANDS. from Gas Treatment Product line

  • Wiser - Scrubbing System

    The system and devices of Wiser-scrubbing have been developed thanks to research and development over a period of more than 25 years across several different industrial sectors. The major technical solutions and components are internationally patented and the Wiser-scrubbing system contains the following devices: cyclone, interface scrubber, ...

    By Wiser Oy Ltd. based in Kerava, FINLAND. from Gas Purifications Product line

  • Exergy - Flue Gas Dryer

    The Exergy Flue Gas Dryer was developed to meet the needs of the industry for the utilisation of latent heat in flue gases from boilers. The dryer consists of feeding and discharge equipment, a separation cyclone and specially designed drying conduits. The bio-mass is fed in hot flues gas stream and gets in direct contact with flues gases. The ...

    By Swedish Exergy AB based in Gothenburg, SWEDEN.

  • Dry Scrubber

    In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is used as the ...

    By Santes Incinerator based in Sincan, TURKEY. from Flue Gas Treatment Product line

  • RUNSUN - Aluminum Scrap Recycling Plant

    IntroductionAluminum chip/scrap recycling Plant is an innovative production line designed by our senior experts who have learnt Europe advanced technology and concept, combined with domestic and foreign customers' requirements and practical suggestions. This aluminum chip/scrap recycling production line achieves a high standard of energy ...

    By Runsun Metallurgical Equipment Co., Ltd based in Quzhou, CHINA.

  • Flue Gas Treatment System

    Depend on the environmental and economical request we design the flue gas treatment. Two principal of adsorption came to the fore, wet and dry adsorption. In case of emission there are mainly to standards requested: US EPA Standard, European Standard according the Guideline 2000/76/EC, Mostly both of the standards can be achieved by a dry or wet ...

    By Joseph Egli AG based in Oberurnen, SWITZERLAND.

  • China-Tianying - Flue Gas Purification System

    We has complied with the international advanced standard of EU 2000 Emission. Import, absorb, digest the foreign advanced flue gas treatment process, successfully developed ”SNCR+ Rotary Atomizing Semi-dry+ Dry+ Active Carbon+Bag Precipitator” combined process, and manufactured 250 TPD to 600 TPD waste incineration furnace matched with ...

    By China Tianying Inc. based in Pudong New District, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you