Only show results available in Connecticut? Ok

flue gas cleaning (Flue Gas Cleaning) equipment

  • Premium

    Krauss-Maffei - Model VZU-G - Gypsum Vertical Peeler Centrifuge

    The Krauss-Maffei VZU-G gypsum centrifuge is most suitable for desulfurization of flue gases from coal-fired heat/ power plants, waste incinerators, and copper smelters. Washing the flue gas with limestone slurry is the most successful method and generates reusable gypsum.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Filter Centrifuges Product line

  • Premium

    Codel - Model VCEM5000 - Gas Velocity Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Continuous Emission Monitoring - Flow Monitors Product line

  • Premium

    Codel - Model VCEM5100 - Flue Gas Flow Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Continuous Emission Monitoring - Flow Monitors Product line

  • Premium

    Codel - Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

    The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Continuous Emission Monitoring - Stack Gas Analysers Product line

  • Premium

    Envochem ION - Ion Exchanger Plants

    Our Envochem ION ion exchanger plants are designed and built exactly to your requirements. We select the quality resins that ensure the required water quality is achieved. If required, we manufacture the ion exchanger plants with an integrated gravel bed filter as a pre-treatment stage. Typical applications are water circulation, water treatment, ...

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY. from ION Exchangers Product line

  • Premium

    Multigas Dilution System

    Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient temperature, in order ...

  • Premium

    ZETIAN - Model DMS-300 - Extractive Laser Dust Monitor

    DMS-300 dust monitor is a self-developed high-temperature heat tracing extraction dust monitor, based on years of technology research and development for dust detection. Different from conventional in-situ scattering dust monitor, DMS-300 extracts dust from flue (stack) in uniform speed to dust measurement module with full-process high temperature ...

  • DP CleanTech - Flue Gas Cleaning System

    DP's specialized Flue Gas Cleaning team is based in the Midlands, UK. The team has extensive experience in redefining complex requirements in order to deliver specialized solutions, and has a proven track record in delivering reliable and cost effective systems for meeting emissions standards all over Europe. DP CleanTech has dedicated engineers ...

    By DP CleanTech based in Jiyuqiao, Wuchang District, CHINA. from Emissions Management Technology Product line

  • Martin - Flue Gas Cleaning System

    The flue gas cleaning system is an integral part of every modern Waste-to-Energy plant. During combustion, pollutants contained in the waste are released and pass into the flue gases which must be cleaned before they can safely be allowed to enter the atmosphere. Suitable processes and components are combined according to technical and economical ...

    By Martin GmbH für Umwelt- und Energietechnik based in München, GERMANY.

  • Flue Gas Cleaning Equipment

    The emission requirement from the authorities has been tightened  dramatically in the last 10 years.This means that we at Jernforsen also provide equipment for flue gas cleaning for our plants. This is done through three different technologies in order to meet our customers' financial needs and the regulatory requirements.

    By Jernforsen Energi System AB based in Halmstad, SWEDEN.

  • Doosan Lentjes - Flue Gas Cleaning System

    Deliver on your environmental and emission objectives with our trusted Circoclean® flue gas cleaning (FGC) solution, using proven fluidised bed technology.

    By Doosan Lentjes GmbH based in Ratingen, GERMANY.

  • Flue Gas Cleaning Plants

    We design and produce DRY,WET or MIXED flue gas cleaning systems, of our own design (some systems are patented); each system can be then implemented, in case of necessity, by means of the new RETROFIT system of SUPERDEPURATION, which allows to reach emission level largely below the actually permitted limits by 2000/76/CEE norm (NZEP system, 'near ...

    By ING.GALLARATI based in Broni, ITALY.

  • Premium

    ZETIAN - Model PT-500L - Integration Monitor of Temperature, Pressure and Velocity

    PT-500L is an integration monitor of temperature, pressure and flow velocity which designed for high dust,high temperature and high humidity. The instrument uses precision micro-differential pressure/static pressure sensor and a unique pitot tube structural design, combined with automatic cleaning. It can be widely used for real-time ...

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA. from Flue Gas Analyzer Product line

  • Hot Flue Gas Cleaning Equipment

    To keep our environment clean, Filcon Filtration A/S has specialized in the treatment of hot flue gas. Hot flue gas is generated from biomass, gasification or waste incinerators. It may contain high concentrations of the chemical particles that are harmful to humans and the environment. We have installed bag filter systems in plants for the ...

    By Filcon Filtration A/S. based in Korsør, DENMARK.

  • Flue Gas Cleaning and Conditioning Plant

    Depending on the fuel, size of the plant and the customer’s requirement, the flue gases from biomass energy plants are cleaned before they are directed outside via the chimney system.

    By Polytechnik Luft- und Feuerungstechnik GmbH based in Weissenbach (NÖ), AUSTRIA.

  • Wet Flue Gas Cleaning (Wet Scrubbing)

    Scrubbers are used in wet flue gas cleaning for cleaning the flue gas. In the scrubbing zone, the pollutants contained in the flue gas are separated through an intensive contact with the scrubbing water by means of physical or chemical absorption. In the first stage of wet scrubbing, primarily HCl, HF, mercury compounds, dust, heavy metals bound ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • GEM Matthews - Flue Gas Cleaning and Mercury Reduction Systems

    Our Company is the only one on the European market able to propose two alternative solutions for flue gas cleaning systems, based on the 'best available technology' (B.A.T.), both capable of ensuring compliance with the most restrictive European and international standards, user needs in terms of available space, type of use, and reference ...

    By GEM Matthews International Srl based in Udine, ITALY. from Biomass & Fume Treatment Product line

  • Quasi-Dry Flue Gas Cleaning (Spray Absorption)

    For the quasi-dry flue gas cleaning, suspensions or solutions are distributed in the flue gas flow by means of a spray absorber with rotary distributor or two-component nozzles. The acid flue gas components are absorbed in alkaline droplets with simultaneous water vaporization. For the separation of organic pollutants and heavy metals, an ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Radscan - Combining Flue Gas Condensation with Flue Gas Cleaning System

    Combining flue gas condensation with flue gas cleaning seems to be a natural choice. The treatment method is chosen depending on the process and cleaning requirements, but also in consultation with the customer. The cleaning is usually done with scrubbers or fabric filters with activated carbon and lime dosing. Our proprietary Intervex process is ...

    By Radscan Intervex AB based in Västerås, SWEDEN.

  • Dry Flue Gas Cleaning (Dry Absorption, Conditioned Dry Absorption)

    In the process of dry flue gas cleaning, the flue gas, if necessary, is moistened and cooled upstream of the actual reaction stage. This is done, on the one hand, for protecting the filter (temperature) and, on the other hand (if lime is used), for moistening the flue gas up to the dew point range. In order to bind the pollutants contained in the ...

    By DrySoTec GmbH based in Essen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you