Only show results available in Connecticut? Ok

flue gas mercury (Flue Gas Cleaning) equipment

  • Premium

    Tekran - Model 3321 - Wall Mounted Flue Gas Sample Conditioner

    The Tekran Model 3321 Wall Mounted Sample Conditioner allows virtually any combustion gas matrix to be analyzed for total gaseous mercury, elemental mercury and ionic mercury. The Model 3321 is designed around a modular framework, allowing a wide range of applications from bench-scale research to full-scale installations. The wall-mounted design ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEMS Product line

  • Premium

    Tekran - Model 2537Xi - Mercury Vapor Analyzer

    The Tekran Model 2537Xi mercury vapor analyzer is built specifically for stack monitoring of flue gases and other elevated-Hg source gases. The 2537Xi is the cornerstone of the Tekran Series 3300Xi Mercury CEMs which has been installed at over 200 sites in the U.S. The 2537Xi has proven accurate, stable, and reliable under the most remote and ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEMS Product line

  • Premium

    Tekran - Model 3300Xi HgCEM - Mercury Continuous Emissions Monitor - Mercury CEM - Flue Gas Analysis - Emissions Analyzer

    The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEMS Product line

  • PowerPAC Premium Plus - Flue Gas Mercury Control Activated Carbon

    This product has been optimized for flue gas mercury capture. It incorporates advanced halogen treatment to improve the oxidation of mercury. Its use is recommended in certain challenging applications including low-halogen flue gases when conventional halogenated Powdered Activated Carbons are inadequate.

    By ADA Carbon Solutions, LLC based in Littleton, COLORADO (USA).

  • GEM Matthews - Flue Gas Cleaning and Mercury Reduction Systems

    Our Company is the only one on the European market able to propose two alternative solutions for flue gas cleaning systems, based on the 'best available technology' (B.A.T.), both capable of ensuring compliance with the most restrictive European and international standards, user needs in terms of available space, type of use, and reference ...

    By GEM Matthews International Srl based in Udine, ITALY. from Biomass & Fume Treatment Product line

  • MERCOX - Mercury Removal System

    Mercury is often emitted from thermal treatment installations during brief periods creating extremely high mercury concentration spikes in untreated flue gases. Many traditional flue gas cleaning systems have limited buffer capacity, which means such concentrations cannot be reduced as much as desired. In such cases, or in applications in which ...

    By Babcock & Wilcox Vølund AB based in Gothenburg, SWEDEN. from Flue Gas Cleaning Product line

  • Model 80RT-IL - Flue Gas Stream Technology

    Flue gas stream enters the scrubber in which a unique complex of Ionic liquid and an oxidant agent is circulated. The offered approach and structure enable short contact time between the flue gas and liquid and a very efficient reaction. The mercury is oxidized and binds as a stable complex in the liquid. The system removes all mercury forms, ...

    By Mercu Removal Ltd based in Netanya, ISRAEL.

  • Dustex - Model ACI - Activated Carbon Injection System

    An Activated Carbon Injection (ACI) System is an engineered system from which powdered activated carbon (PAC) is pneumatically injected from a storage silo into the flue gas ductwork. The PAC adsorbs the mercury from the flue gas and is then collected with the fly ash in the plant’s particulate collection device. ACI is the most established ...

    By Dustex Corporation based in Kennesaw, GEORGIA (US) (USA).

  • ITK Envifront - Model SSDA - Micro Dosing System

    SSDA is intended for cyclical or continual injection of sorbent/additives in flue gases. This can include heavy metals, dioxines or the neutralisation of acid gases in flue gases e.g. separation of mercury and dioxines in a crematorium or a facility for hazardous waste. In the flue gas duct in the vicinity of e.g. a contactor or a filter the ...

    By ITK Envifront AB based in Växjö, SWEDEN. from Plant Accessories Product line

  • PowerPAC - High-Quality Powdered Activated Carbon (PAC)

    This high-quality powdered activated carbon (PAC) is our standard product for mercury capture in halogen-containing flue gas. Various properties including pore structure, particle size and shape, moisture and mineral content, have been optimized for mercury capture and sequestration. Use this product when you are firing high chlorine containing ...

    By ADA Carbon Solutions, LLC based in Littleton, COLORADO (USA).

  • FastPAC - Powdered Activated Carbons

    FastPAC™ is a patent-pending, next-generation powdered activated carbon that is designed to rapidly and efficiently remove mercury from the flue gas of power plants and other coal-fired facilities, particularly in systems that have pre-oxidized mercury. This non- brominated carbon is produced from coal and lignite feedstock’s that have ...

    By ADA Carbon Solutions, LLC based in Littleton, COLORADO (USA).

  • a1-cbiss - Model HM 1400 TR - Total Mercury Analyser

    a1-cbiss supply a monitoring system for fully-automatic and continuous mercury analysis in smoke gas (without wet chemistry). Measuring principle: In the HM 1400 TR total mercury analyser the sample gas is converted into mercury vapour by a combination of thermal and dry chemical treatment. This is then continuously measured in a photometer. The ...

    By a1-cbiss based in Birkenhead, UNITED KINGDOM. from Continuous Emission Monitoring Systems Product line

  • Wet Flue Gas Cleaning (Wet Scrubbing)

    Scrubbers are used in wet flue gas cleaning for cleaning the flue gas. In the scrubbing zone, the pollutants contained in the flue gas are separated through an intensive contact with the scrubbing water by means of physical or chemical absorption. In the first stage of wet scrubbing, primarily HCl, HF, mercury compounds, dust, heavy metals bound ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Dry Flue Gas Cleaning (Dry Absorption, Conditioned Dry Absorption)

    In the process of dry flue gas cleaning, the flue gas, if necessary, is moistened and cooled upstream of the actual reaction stage. This is done, on the one hand, for protecting the filter (temperature) and, on the other hand (if lime is used), for moistening the flue gas up to the dew point range. In order to bind the pollutants contained in the ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • ITK Envifront - Model PFMH-TFAC - Cremation Process Flue Gas Filter

    The PFMH-TFAC filter is specially designed to clean flue gas from cremation processes. It is built to be able to fit in small premises with a low ceiling height and little space. The fabric filter PFMH's task is to clean the flue gas from particles of dust and the bed filter TFAC is composed with active carbon to clean the air from dioxides and ...

    By ITK Envifront AB based in Växjö, SWEDEN. from Flue Gas Cleaning / Gas Collection Product line

  • Mercury Speciation Sorbent Traps

    Mercury speciation sorbent traps are designed to differentiate between elemental and oxidized mercury in the flue gas by capturing the different species in their respective designated sections.

    By Ohio Lumex based in Solon, OHIO (USA). from Sorbent Traps Product line

  • PowerPAC Premium - Halogenated Powdered Activated Carbon (PAC)

    This halogenated powdered activated carbon (PAC) begins with our PowerPAC technology and adds a halogen to promote mercury oxidation. It is specifically designed for flue gas mercury capture in low-halogen applications such as powder river basin coals, lignite coals, and biomass. This product provides a holistic approach to mercury capture ...

    By ADA Carbon Solutions, LLC based in Littleton, COLORADO (USA).

  • MerControl - Model 8034 - Re-emissions Control for WFGD

    It is known that oxidized mercury is soluble in water and therefore can be removed from the flue gas by the presence of a w-FGD. However, for certain w-FGDs, when oxidized mercury enters the scrubber it is reduced to elemental mercury which is not soluble, resulting in lower mercury capture efficiency and increased stack emissions. This phenomenon ...

    By Nalco - an Ecolab company based in Naperville, ILLINOIS (USA).

  • Flue Gas Treatment systems

    Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts. Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy. Under such ...

    By Lodge Cottrell Ltd based in Halesowen, UNITED KINGDOM.

  • MerControl - Model 7895 - Mercury Oxidation Catalyst

    Nalco owns the exclusive patent rights for the application of MerControl 7895 technology, a simple emissions control strategy that allows the user to rapidly and cost effectively respond to changes in operations and fuel quality that drive mercury emissions. MerControl 7895 technology is a stable, water-based solution that releases molecular ...

    By Nalco - an Ecolab company based in Naperville, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you