Only show results available in Connecticut? Ok

flue gas scrubbing (Flue Gas Cleaning) equipment

  • Swenson - Flue Gas Dry Scrubbing Systems (FGD)

    The Swenson Flue Gas Dry Scrubbing System (FGD) is designed to remove sulfur dioxide, hydrogen chloride and other contaminants from flue gas. The FGD system consists of an alkali (Na or Ca) feed preparation, spray dryer, and dry collector (fabric filter or electrostatic precipitator). Alkali feed is atomized by means of a two-fluid nozzle or ...

    By Swenson Technology, Inc. based in Monee, ILLINOIS (USA). from Other Product line

  • Wet Flue Gas Cleaning (Wet Scrubbing)

    Scrubbers are used in wet flue gas cleaning for cleaning the flue gas. In the scrubbing zone, the pollutants contained in the flue gas are separated through an intensive contact with the scrubbing water by means of physical or chemical absorption. In the first stage of wet scrubbing, primarily HCl, HF, mercury compounds, dust, heavy metals bound ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Wiser - Scrubbing System

    The system and devices of Wiser-scrubbing have been developed thanks to research and development over a period of more than 25 years across several different industrial sectors. The major technical solutions and components are internationally patented and the Wiser-scrubbing system contains the following devices: cyclone, interface scrubber, ...

    By Wiser Oy Ltd. based in Kerava, FINLAND. from Gas Purifications Product line

  • Waste - Unused Energy Utilization System

    Electrical Power Generation - Hybrid Spiral Cycles. With the application of UTC’s Hybrid Spiral Cycles, low, medium and high level heat is converted into electrical power to achieve the maximum thermal, mechanical and electrical efficiencies to minimize the capital, operational and maintenance costs and deliver higher margins.  These ...

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Air Pollution Control Systems Product line

  • Ecopure - Model FGA - Flue Gas Scrubber System

    EcopureFGA Scrubbing Systems can be used to remove gaseous inorganic pollutants and particles from flue gases downstream of a thermal oxidizer. Particles are separated using filtering separators such as baghouse filters or electrostatic precipitators. Dry and wet processes are available for separating gaseous constituents of exhaust gases. In many ...

    By Olpidürr S.P.A based in Novegro di Segrate (MI), ITALY. from Exhaust Air Purification - Absorption Product line

  • Xerosorp+ - Scrubber

    The Xerosorp+ Process Combines the Advantages of the Dry Scrubbing Process and Low Temperature SCR-DeNOx System. The Xerosorp+ process is the optimized combination of the Xerosorp and the low temperature SCR-DeNOx processes. If highest removal efficiencies are required for ash, acid gas and NOx, the Xerosorp+ process is the solution with lowest ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Incinerators for Alkaline Solutions

    By incineration of alkaline solutions, low-melting eutectics are formed which always lead to an attack of the refractory lining of the combustion chamber. In order to avoid total wear of the initial ceramic lining a jacketed combustion chamber is used. The heat loss through the chamber is utilised to generate saturated steam. By this, the ...

    By Caloric Anlagenbau GmbH based in Graefelfing, GERMANY. from Incinerators & Thermal Oxidisers Product line

  • RWE REAplus - High-performance Scrubber

    Ever since the 1980s, flue-gas desulphurization (FGD, or its German equivalent REA) plants have been filtering sulphur dioxide (SO2) out of the flue gas from lignite-fired power stations. The scrubbing method, in which the SO2 is washed out using limestone slurry, has long since proved its worth. Today, more than 95% of the desulphurization ...

    By RWE AG based in Essen, GERMANY.

  • Caldyn - Model CED - Single-phase Nozzles

    CALDYN hydraulic full cone nozzles are versatile and reliable! The CALDYN hydraulic nozzles are used for: The spraying on mass transfer packings. Scrubbing and cooling of flue gas and separators. Atomization of liquids into comparatively large droplets. Sprinkling of surfaces with liquids.

    By Caldyn Apparatebau based in Ettlingen, GERMANY. from Atomizing Systems Product line

  • Model HZI - Wet Scrubber

    Wet scrubbing is the most effective method for removing acid gases from even heavily burdened flue gases and achieving lowest emission levels. It also assures excellent removal of fine particulates and aerosols. Consumable usage rates and residue quantities are minimised. The contaminants are captured by providing intensive contact between the ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Envitech - Condenser/Absorber

    The Condenser/Absorber sub-cools and scrubs acids from the gas. Reducing the gas volume through condensation of the water vapor significantly lowers energy requirements. Also, heavy metals such as mercury, lead and cadmium are condensed for collection. The Condenser/Absorber condenses out more than eighty percent of the flue gas moisture. The ...

    By Envitech, Inc. based in San Diego, CALIFORNIA (USA).

  • Model 9500 Series - Spray Tower Acid Gas Scrubber

    Specifically designed to treat acid gas emissions from particulate laden combustion flue gas, the Series 9500 Spray Tower Srubber is an extremely simple acid gas scrubber device capable of over 98% control efficiency. The scrubber consists of a fully open vertical vessel fitted with banks of hydraulic atomized spray nozzles. Nozzles feature an ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Wet Scrubber Product line

  • Model BMWi1 - Medical Waste Incinerator

    We offer medical waste incinerators of capacity ranging from 50 kg/hour to 250 kg/hour. Medical Waste Incinerator of these type are double chambered and with advanced pollution controlled devices controlled by Programmable Logic Circuit (PLC). The flue gas generated during combustion are scrubbed and cleaned before being let out into the ...

    By Scientico based in Ambala, INDIA. from Medical Waste Incinerator Product line

  • Marine SOx Scrubbers

    Marine SOx scrubbers have been developed to abate the sulphur emissions from shipping. Nordkalk's desulphurisation concept is based on a dry scrubber where granules made from Nordkalk slaked lime (calcium hydroxide) absorb sulphur from the flue gas of the ship. The benefit of the dry scrubber is the absence of emissions to both air and sea, as the ...

    By Nordkalk Corporation based in Pargas, FINLAND. from Energy Product line

  • EPL - Scrubber Systems

    Scrubber systems are a diverse group of air pollution control devices that can be used to remove some particulates and/or gases from industrial exhaust streams. 'Scrubber' is a pollution control devices that use liquid to wash unwanted pollutants from a gas stream. Scrubbers are one of the primary devices that control gaseous emissions, especially ...

  • Dry Scrubbing Systems

    Spray Dryer Absorption (SDA) is a dry scrubbing process that is generally used for low-sulfur coal. SDA FGD systems are typically located after the air preheaters, and the waste products are collected either in a baghouse or electrostatic precipitator. However, to achieve sulfur dioxide (SO2) reduction above 80% with good reagent use, the dry ...

    By Carmeuse Lime based in Pittsburgh, PENNSYLVANIA (USA). from Quicklime-Flue Gas Treatment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you