Only show results available in Connecticut? Ok

flue gas stream (Flue Gas Cleaning) equipment

  • Premium

    CECO Aarding - Selective Catalytic Reduction (SCR) for NOx Emissions

    As flue gases are combusted in gas turbines and process furnaces, nitrogen oxide (NOx) is formed. Our Selective Catalytic Reduction (SCR) system is a post-combustion NOx control technology, which injects an ammonia (NH3) based reagent into the flue stream to reduce NOx emissions by up to 95%. Our SCR designs are engineered to optimize efficiency, ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - De-NOx Solutions Product line

  • Model 80RT-IL - Flue Gas Stream Technology

    Flue gas stream enters the scrubber in which a unique complex of Ionic liquid and an oxidant agent is circulated. The offered approach and structure enable short contact time between the flue gas and liquid and a very efficient reaction. The mercury is oxidized and binds as a stable complex in the liquid. The system removes all mercury forms, ...

    By Mercu Removal Ltd based in Netanya, ISRAEL.

  • Exergy - Flue Gas Dryer

    The Exergy Flue Gas Dryer was developed to meet the needs of the industry for the utilisation of latent heat in flue gases from boilers. The dryer consists of feeding and discharge equipment, a separation cyclone and specially designed drying conduits. The bio-mass is fed in hot flues gas stream and gets in direct contact with flues gases. The ...

    By Swedish Exergy AB based in Gothenburg, SWEDEN.

  • DARCO - Model FGD - Powdered Activated Carbon

    DARCO FGD is a steam activated carbon manufactured specifically for the removal of heavy metals and other contaminants typically found in incinerator flue gas emission streams. It has been proven in numerous full scale operating facilities to be highly effective for the removal of gaseous mercury, dioxins (PCDD) and furans (PCDF). Its open pore ...

    By J Carpenter Environmental LLC (JCE) based in Mequon, MICHIGAN (USA). from Air Pollution Control Products & Equipment Product line

  • Euro Tech - Model ET3900 - Flue Gas Conditioner for Continuous Emission Monitoring and Stack Sampling

    The heated sample extraction gas conditioner of ET3900 is designed for continuous extraction of gas from a process or exhaust stream; stack testing and process monitoring. The heated probes heat the gas sample and keep it hot to eliminate condensation. ET3900 flue gas pretreatment instrument by heated sampling probe, composition and the rapid ...

    By Euro Tech (Far East) Ltd. based in Wong Chuk Hang, CHINA. from Scientific Equipment Product line

  • Wet Scrubber

    Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate ...

    By Santes Incinerator based in Sincan, TURKEY. from Flue Gas Treatment Product line

  • Pentol - Flue Gas Conditioning Plant

    Flue gas conditioning is the controlled injection of small quantities of sulfur trioxide into the flue gas stream, reducing the resistivity of the fly ash and permitting its collection in the existing precipitator. When flue gas conditioning is installed on units that have switched to lower sulfur coal, solid emissions are significantly reduced, ...

    By Pentol-Enviro AG based in Basel, SWITZERLAND. from Coal Fired Power Plants Product line

  • Powdered Activated Carbon

    Powdered Activated Carbon (PAC) injection is widely used method to control heavy metals and dioxins emissions. The porous structure of carbon makes it an ideal solution for absorption and it can be injected directly into the flue gas stream or laid in beds for the flue gas to pass through. The injection temperatures, feed rate, material porosity ...

    By Addfield Environmental Systems Ltd. based in Staffordshire, UNITED KINGDOM. from Filtration Product line

  • MicroMist - Evaporative Gas Conditioning

    Evaporative Gas Conditioning (EGC) is a technique for conditioning flue gas prior to electrostatic precipitators or fabric filters to reduce gas volume, lower the temperature, and improve particulate collection. Finely atomized water is evaporated in the gas stream to lower its temperature and raise the moisture content.

    By Envirocare International, Inc. based in American Canyon, CALIFORNIA (USA).

  • Model MC3 - Multicomponent Analyzer

    The MC3 is a multicomponent IR gas analyzer that is specifically designed for continuous monitoring of a flue gas stream. The infrared optical bench, sample cell and control components are all integrated into one convenient, and easily serviced ventilated enclosure.

    By EcoChem Analytics based in League City, TEXAS (USA). from Stack Monitoring Systems Product line

  • EPL - Scrubber Systems

    Scrubber systems are a diverse group of air pollution control devices that can be used to remove some particulates and/or gases from industrial exhaust streams. 'Scrubber' is a pollution control devices that use liquid to wash unwanted pollutants from a gas stream. Scrubbers are one of the primary devices that control gaseous emissions, especially ...

  • Model ESP - Mobile Testing System

    Our mobile ESP can be used to study your emission problem on site and develop an effective solution. This equipment enables us to analyze your flue gas stream, determine ESP collection efficiencies, and collect data to size a full-scale wet or dry ESP system for your application.

    By McGill AirClean LLC based in Columbus, OHIO (USA). from Mobile Stack Testing Product line

  • Combined Processes

    The demands made by industry on the cleaning processes are complex and require system solutions and consideration of the possible individual emission reduction measures. Waste gas, exhaust gas or flue gas streams can often no longer be cleaned in an ecologically appropriate manner only by means of a single-stage cleaning process. Operating ...

    By Standardkessel Baumgarte GmbH based in Duisburg, GERMANY. from Process Technology Product line

  • Senshang - Model SS-600C - Hot & Wet Waste Incineration CEMS System

    SS-600C Hot & Wet Waste Incineration CEMS System developed and produced by Senshang Instruments is to monitor the total air pollutant emissions from stationary sources in waste incineration power plant, to measure SO2, NO, NO2, CO, CO2, HCL, NH3, O2 and H2O, as well as simultaneously to measure particles content, gas flow, gas pressure, gas ...

    By Hunan Senshang Instrument Co.,Ltd based in Yuhua District, Changsha City, CHINA. from Complete Gas Analysis Systems Product line

  • MET - Advanced Circulating Dry Scrubber Flue Gas Desulfurization (CDS-FGD) System

    Known around the globe for solid and innovative air quality control technologies, MET's advanced circulating dry scrubber flue gas desulfurization (CDS-FGD) system provides the proper chemistry and conditions to simultaneously and effectively absorb sulfur dioxide, acid gases and associated heavy metals. This advanced, multi-pollutant control ...

    By Marsulex Environmental Technologies (MET) based in Lebanon, PENNSYLVANIA (USA). from Other Technology Product line

  • PSB - Carbon Dioxide Dryers

    Carbon Dioxide (CO2) Gas, a greenhouse gas, is a byproduct of H2 production plants, petroleum refining processes, flue gas emissions from power generation, and other sources.Carbon capture and storage (CCS)is a means of capturing and removing CO2 from large sources and storing it away from the atmosphere by sequestration or using it for enhanced ...

    By PSB Industries Inc based in Erie, PENNSYLVANIA (USA). from Carbon Dioxide Product line

  • EnProve - Model BC - Sodium Bicarbonate Sorbent

    Sodium bicarbonate has been used for centuries for a myriad of applications and today remains an environmentally friendly compound revered for its versatility. EnProve BC is pulverized and then injected directly into the flue gas stream. Thermal decomposition to soda ash in a 'popcorn' effect creates a very large and reactive surface area that ...

    By Natronx Technologies, LLC based in Princeton, NEW JERSEY (USA).

  • Apex Instrument - Mercury Sorbent Traps

    PS 12B specifies sampling, and analytical, and quality-assurance criteria and procedures for the performance-based monitoring of vapor-phase mercury (Hg) emissions in combustion flue gas streams, using a sorbent trap monitoring system. The principle employed is continuous sampling using in-stack sorbent media coupled with analysis of the ...

    By Apex Instruments, Inc. based in Fuquay-Varina, NORTH CAROLINA (USA). from Mercury and Gas Sampling Equipment Product line

  • EnProve - Model MBC - Milled Sodium Bicarbonate Sorbent

    EnProve MBC (milled sodium bicarbonate) is a highly reactive and environmentally friendly sorbent. When injected directly into the flue gas stream, EnProveTM MBC has a high absorption efficiency to remove acid gases. Thermal decomposition to soda ash in a 'popcorn' effect creates a very large and reactive surface area that absorbs SO2, SO3, HCl ...

    By Natronx Technologies, LLC based in Princeton, NEW JERSEY (USA).

  • C.E.M. - Process Monitoring Systems

    Due to stringent regulations, some facilities are required to install aftermarket pollution control systems to reduce criteria pollutant concentrations such as NOx and SO2. In order to control the performance of the pollution control system, monitoring systems are located before and after the control device(s). C.E.M. Solutions provides ...

    By C.E.M. Solutions, Inc. based in Hernando, FLORIDA (USA). from Other Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you