Only show results in Connecticut? Ok

wet flue gas (Flue Gas Cleaning) equipment

  • Premium

    ZETIAN Hygronom - Model HM-100 - ( RC) Humidity Analyzer

    Humidity analyzer is also known as moisture or dew point analyzer for measuring pollutant emissions flue gas humidity with wet gas concentration being converted to dry gas concentration, also can be used for industrial on-line moisture monitoring. HM-100 can be installed directly through the flange to the flue or chimney. Signal of ...

  • Premium

    PCME - Model QAL 182 WS - Particulate Continuous Emission Monitor

    The PCME QAL 182 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets and ...

    By ENVEA based in Poissy, FRANCE. from Particulate CEMS Product line

  • Premium

    ZETIAN - Waste Incineration HCL/HF Analyzer

    Waste incineration plants require automatic continuous monitoring main component content in flue gas, which include CO, HF, HCl, SO2, NOx and soot, while HCl and HF are the difficulties in detection.Under the condition of demand, the company developped a waste incineration HCl/HF analyzer.The principle of the system is based on the TDLAS ...

  • Premium

    PCME - Model STACK 181 WS - Particulate Continuous Emission Monitor

    The PCME STACK 181 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets ...

    By ENVEA based in Poissy, FRANCE. from Particulate CEMS Product line

  • Premium

    ZETIAN - Model DMS-300 - Extractive Laser Dust Monitor

    DMS-300 dust monitor is a self-developed high-temperature heat tracing extraction dust monitor, based on years of technology research and development for dust detection. Different from conventional in-situ scattering dust monitor, DMS-300 extracts dust from flue (stack) in uniform speed to dust measurement module with full-process high temperature ...

  • Premium

    ENVEA - Model PCME QAL 182 WS - Particulate Monitor Certified by TUV and MCERTS as QAL1 Compliant

    The PCME QAL 182 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present.

    By ENVEA based in Poissy, FRANCE. from Emission Monitoring - Particulate Monitors Product line

  • Premium

    Gasmet - Oxygen Analyzer System

    Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is needed. The measurement is based on sensor technology with a ZrO2 sensor and a microprocessor unit. The analyzer can measure oxygen ...

    By Gasmet Technologies Oy based in Vantaa, FINLAND. from Emission Monitoring Systems Product line

  • Premium

    Lime Filtration

    The use of lime for treating flue gases is a proven technology. Flue gas is generated from the thermal treatment process in Energy from Waste plants (EfW) and contains acidic gases such as hydrogen chloride, sulphur dioxide and hydrogen fluoride. The use of lime in the three main flue gas treatment processes of; dry, semi-dry and wet processes ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Pollution Control Systems - Others Product line

  • Wet Flue Gas Cleaning (Wet Scrubbing)

    Scrubbers are used in wet flue gas cleaning for cleaning the flue gas. In the scrubbing zone, the pollutants contained in the flue gas are separated through an intensive contact with the scrubbing water by means of physical or chemical absorption. In the first stage of wet scrubbing, primarily HCl, HF, mercury compounds, dust, heavy metals bound ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Model SOx | HCl | HF - Wet Flue Gas Desulphurization Plants

    Steuler Anlagenbau offers highly effective, economical methods for desulphurization of flue gases produced by thermal processing, treatment and combustion plants. In addition to installing new plants, we specialize in retrofitting and upgrading existing plants with the latest technology from an ecological and economic standpoint. We work closely ...

    By Steuler Anlagenbau GmbH & Co. KG based in Höhr-Grenzhausen, GERMANY.

  • Wet Scrubber

    Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate ...

    By Santes Incinerator based in Sincan, TURKEY. from Flue Gas Treatment Product line

  • Enviropol - Pre-dust Collectors

    Enviropol, Pre dust collectors (PDC) are designed to operate at low pressure drop for removal of coarser / un-burnt fly ash particles from the flue gas prior to this being fed to Primary Air pollution control device such as ESP or Wet Scrubbers.

    By Enviropol Engineers Pvt.Ltd. based in NOIDA, INDIA. from Air Pollution Control Product line

  • Ecopure - Model FGA - Flue Gas Scrubber System

    EcopureFGA Scrubbing Systems can be used to remove gaseous inorganic pollutants and particles from flue gases downstream of a thermal oxidizer. Particles are separated using filtering separators such as baghouse filters or electrostatic precipitators. Dry and wet processes are available for separating gaseous constituents of exhaust gases. In many ...

    By Olpidürr S.P.A based in Novegro di Segrate (MI), ITALY. from Exhaust Air Purification - Absorption Product line

  • Model HZI - Wet Scrubber

    Wet scrubbing is the most effective method for removing acid gases from even heavily burdened flue gases and achieving lowest emission levels. It also assures excellent removal of fine particulates and aerosols. Consumable usage rates and residue quantities are minimised. The contaminants are captured by providing intensive contact between the ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Flue Gas Treatment System

    Depend on the environmental and economical request we design the flue gas treatment. Two principal of adsorption came to the fore, wet and dry adsorption. In case of emission there are mainly to standards requested: US EPA Standard, European Standard according the Guideline 2000/76/EC, Mostly both of the standards can be achieved by a dry or wet ...

    By Joseph Egli AG based in Oberurnen, SWITZERLAND.

  • Model MC3 - Multicomponent Analyzer

    The MC3 is a multicomponent IR gas analyzer that is specifically designed for continuous monitoring of a flue gas stream. The infrared optical bench, sample cell and control components are all integrated into one convenient, and easily serviced ventilated enclosure.

    By EcoChem Analytics based in League City, TEXAS (USA). from Stack Monitoring Systems Product line

  • SOLVAir - Model SB 0/3 - Bicarbonate Based Formulation Sodium

    SOLVAir® SB 0/3 is a sodium-bicarbonate-based formulation for flue gas treatment. It is particularly recommended to revamp plants equipped with a lime milk semi-wet or a dry lime injection based flue gas treatment with a bag filter and a DeNOX selective catalytic reduction system. As a ready-to-use sorbent, SOLVAir® SB 0/3 is known for its ...

    By Solvay based in Brussels, BELGIUM. from Air Treatment Product line

  • Air Pollution Control

    ANDRITZ provides innovative air pollution control technologies, including wet flue gas cleaning, dry flue gas cleaning, DeNOx plants, and combined or multi-stage systems. Our product range combines long-term experience with the specific knowledge gained from hundreds of installations around the world. ANDRITZ Energy & Environment (AE&E) is ...

    By ANDRITZ Atro GmbH based in Nuernberg, GERMANY. from Andritz Metals Product line

  • RPS - Model AA-series - Pressure Piping Systems

    RPS AA-series piping includes both an inner and outer erosion and corrosion resistant liner. AA-series piping is custom designed for absorber internal spray pipes in wet flue gas desulphurization systems and has become the preferred material for harsh environment. RPS AA-series piping has been installed in over 100 Flue Gas Desulphurization (FGD) ...

    By RPS Composites, Inc. based in Mahone Bay, NEW BRUNSWICK (CANADA). from Piping System Product line

  • Wet Electrostatic Precipitator Technology

    Wet electrostatic precipitators have been used for many decades for the effective separation of micro-particles and aerosols. Michaelis uses long term operational experiences in the industrial field and offers wet ESP systems with gas flow capacities from 500 Nm3/h upwards. Wet electrostatic precipitators are operated in water-saturated areas, i. ...

    By Michaelis GmbH & Co. KG based in Veitshöchheim, GERMANY. from Clean Air Technology Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you