Gas Combustion Applications

17 Results found
Only show results available in Virginia?
OK
  • Category: Energy & Renewables ×

  • Subcategory: Gas Combustion ×

Thermoplastic piping for plumbing & mechanical

by IPEX     based in Verdun,, QUEBEC (CANADA)

As one of the world’s leading manufacturer’s of thermoplastic pipe, valves, fittings and related products for plumbing and mechanical applications, we offer a broad range of products for use in both combustible and non-combustible construction. From potable water distribution and DWV to Flue Gas Venting and Fire Protection, IPEX offers a comprehensive range of integrated solutions to meet the needs of engineers and contractors in commercial, institutional, industrial and residential construction.

Low emissions auxiliary boilers to coal or otherwise fired power plants

by Superior Boiler Works, Inc.     based in Hutchinson, KANSAS (USA)

Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

Smoke generator device for hot fire training

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

Concept`s ViCount smoke generators are installed throughout the world in quality hot fire training centres - providing the most realistic artificial smoke effect possible. They are also used to add smoke during carbonaceous burns. The majority of fire training centres and schools use gas to replicate the appearance and heat of a real fire but one thing gas doesn`t produce is smoke! The ViCount range of oil-based smoke generators from Concept produces a smoke with a temperature resistance up to 200C, so realism can be added to Hot Fire simulators effectively and safely.

Measurement solution for fire testing for the railway industry

by Protea Limited     based in Middlewich, UNITED KINGDOM

A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

Measurement solution for siloxane monitoring in biogas and landfill

by Protea Limited     based in Middlewich, UNITED KINGDOM

The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas can allow for a form of renewable energy. Organosilicon compounds often find their way into land-fill or digester gases as siloxanes. Siloxanes are low-level hazards to the atmosphere in terms of their emissions, however when they are combusted in gas engines the hard silica that is produced is very harsh to the moving parts of the gas engine.

Combustion gas analysis for the indoor environment industry

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

Analysis of VOC compounds in water by Purge & Trap or dynamic headspace

by Chromatotec Group     based in Val de Virvée, FRANCE

Context & Challenges Volatile organic compounds (VOC) can be dissolved in water. Sometimes water is polluted and to study contamination of VOC in finished drinking water, VOC must be measured. Chromatotec® Solutions Chromatotec® has developed a specific system for the measurement of VOC in water: a Purge & Trap system, the airmoPURGE. The analyzer is coupled with a degasing system allowing the extraction of dissolved gases. The complete system is based on: - 502.2 method from US EPA – “Volatile organic compounds in water by purge and trap capillary column gas chromatography with photoionization and electrolytic conductivity detectors in series – Revision 2.1”. - 524.2 method from US EPA – “Measurement of purgeable organic compounds in water by capillary column gas chromatography/mass spectrometry – Revision 4.0”.

Biogas monitoring

by Banner Engineering Corp.     based in Diegem, BELGIUM

meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

Gas monitoring during industrial process

by HANGZHOU ZETIAN TECHNOLOGY CO., LTD     based in Hangzhou, CHINA

EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust

Combustion gas analysis for the glass industry

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

Workwear & protective fabrics for oil & gas industry

by Arvind Limited     based in Dist : Gandhinagar, INDIA

Where protection from flash fire is required, Arvind PRO1 products can help Saveprecious human lives. Genuine protection starts with the first layer we wear, the flame resistant clothing layer should be closest to skin. This inner FR clothing layer should offer effortless flexibility in movement, soft to the skin feel, excellent moisture permeability and breath ability. It can be made of natural fiber flame resistant materials or synthetic materials.

Gas Detection Solutions for Power Generation Industry

by Boreal Laser Inc.     based in Edmonton, ALBERTA (CANADA)

Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you covered.

Gas monitoring instruments and systems for semiconductor manufacturing

by Gasmet Technologies Oy     based in Helsinki, FINLAND

In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane C2F6.

Need help finding the right suppliers?

Let the XPRTs do the work for you