Only show results available in Virginia? Ok

Gas Networks Applications

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Peristaltic pumps and fluid path technologies for chemical industry

    Watson-Marlow offers a wide range of tube materials to ensure chemical compatibility with your pumped fluid. Reliability and long life will yield production benefits and reduce maintenance costs year after year.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Gas Leak Detection for the Gas Industry

    Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world`s major gas supply companies.

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Strategic market research solutions for oil & gas industry

    Energy burns at the root of PennWell`s history. First printing our flagship publication - the Oil & Gas Journal - in 1902, our petroleum division covers the topics, issues, challenges and solutions most critical to the international petroleum industry. With a network of global events located throughout the world, PennWell collectively reaches more than 135,000 petroleum professionals in 75 countries, providing unparalleled reach of the international petroleum market.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Designing Intelligent Solutions for Oil, Gas and Chemical Industry

    Implico has a unique wealth of experience in the oil, gas and chemical industries. Since 1983, we have successfully implemented both national and international projects. Amongst others, five of the ten largest oil companies in the world rank among our customers.

    By Implico Group based in Hamburg, GERMANY.

  • Premium

    Industrial solutions for the thin film coating

    Thin film deposition processes, e.g. reactive PVD (Physical Vapor Deposition), require a repeatable gas flow of the reactive gas to ensure reproducible film properties. With its industry-leading repeatability of < ± 0.15% FS and very small long term drift the Axetris MFC 2100 series supports you in making your equipment stable and easy to use for your customer.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Thermoplastic piping for plumbing & mechanical

    As one of the world’s leading manufacturer’s of thermoplastic pipe, valves, fittings and related products for plumbing and mechanical applications, we offer a broad range of products for use in both combustible and non-combustible construction. From potable water distribution and DWV to Flue Gas Venting and Fire Protection, IPEX offers a comprehensive range of integrated solutions to meet the needs of engineers and contractors in commercial, institutional, industrial and residential construction.

    By IPEX based in Verdun,, QUEBEC (CANADA).

  • Agitators for Biogas Blants

    Use the SUMA agitators to prevent the formation of floating and sinking substrate layers. Furthermore they ensure that the substrate maintains an equal temperature throughout. The homogeneously distribution of nutrients for the biological process enables more efficient gas flow out of the substrate.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY.

  • Moisture Monitoring for SF6 / Air Circuit Breakers

    SF6 (sulphur hexafluoride ) or air is used as an insulation gas in circuit breakers . Excess moisture in these gases causes arcing, which can trip the circuit breaker and cut off power to the distribution network. More seriously, such arcing can lead to physical damage of equipment and, on occasion, death of plant operatives (please ask for our case study on circuit breakers).

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Moisture Monitoring for Natural Gas & LNG

    The presence of moisture in high-pressure natural gas from production wells causes pipelines and associated valves to freeze. High moisture content also leads to the formation of hydrates of the liquid hydrocarbons present, thus causing further difficulties. The moisture content of the gas also adversely affects the calorific value of the gas, thus lowering the quality and value of the product. Moisture is therefore measured at the point of extraction, at export stations, at gas storage locations and in the transmission grid. As natural gas often contains high levels of contaminants, more complex systems are required to maintain instrument performance over prolonged periods and to verify data collected in spot-check moisture analysis.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Noise and vibration monitoring for oil and gas industry

    The oil and gas industry requires major infrastructure in terms of refineries and offshore extraction platforms which operate continuously. A large number of essential rotating machines, structures and piping networks are subjected to high levels of demand in a difficult environment, leading to the potential for breakage.

    By ACOEM based in Limonest, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you