Heat Recovery Applications

20 Results found
Only show results available in Virginia?
OK
  • Category: Energy & Renewables ×

  • Subcategory: Heat Recovery ×

Biogas for Cooking

by Kirloskar Integrated Technologies Limited     based in Kothrud, INDIA

This solution comprises a Biogas Digester of desired capacity working with specific substrate as input. It may or may not have H2S scrubbing system, depending on the quantity of H2S in the biogas and the requirement by the customer for cleaning it. As the heating value of biogas is almost half that of cooking LPG, specially designed biogas burners are provided to improve cooking speed. Depending on the demand by the customer, a blower to increase gas pressure may be employed.

Environmental technology for chilling - crystallisation industry

by Körting Hannover AG     based in Hannover, GERMANY

For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

Air pollution control for the waste gasification industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

Innovative pump technology for industrial engineering industry

by EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG     based in Kiel, GERMANY

Reliably delivering liquids in different states for various tasks with high efficiency – technical, economical and energy saving. EDUR have held a leading position in this field over decades.

Energy from biogas and natural gas for the waste to energy industry

by Dreyer & Bosse Kraftwerke GmbH     based in Gorleben, GERMANY

You are a farmer/entrepreneur and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

Water treatment chemicals for power plants industry

by Kurita     based in Ludwigshafen, GERMANY

Today’s power industry is already subject to strict official regulations. These rules will only become more stringent in the future. As a result, environmentally friendly, cost-effective solutions that ensure plant and operational safety are in high demand.

Low emissions auxiliary boilers to coal or otherwise fired power plants

by Superior Boiler Works, Inc.     based in Hutchinson, KANSAS (USA)

Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

Continuous process waste tyre to oil recycling

by DoingGroup     based in Henan Province, CHINA

Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

Energy and Fuels from Commercial Waste

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are recovered and the remainder is dried and shredded to make Refuse Derived Fuel (RDF). The RDF is used as fuel in the Gasplasma® plant to generate clean, renewable power and heat.

Applications and Air Pollutants Removed in the Pulp and Paper Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

Landfill leachate wastewater treatment

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Landfill leachate is the runoff water that occurs from operational or closed landfills. This water flows at lower rates on dry days when naturally occurring moisture percolates out and at higher rates on rainy days when the leachate waters are combined with stormwater.

Pyrolysis oil to diesel

by DoingGroup     based in Henan Province, CHINA

Pyrolysis oil to diesel continuous waste pyrolysis oil to diesel Solution: Oil refining machine Applicable: Tire oil, Plastic oil, Waste oil, Pyrolysis oil,Engine oil, Black oil, Heavy oil, etc Output: 85-90% good clean oil, the rest is slag and waste gas Heating fuel: Coal / wood/ fuel oil / gas Oil refining machine land size: 20X15m Reactor material:Q245/ Q345 Boiler plate

Gas measurement for the pulp & paper industry

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements for the harsh environment of a recovery boiler facility, without restricting airflow even in short run ducts.

Waste recovery for glass manufacturing

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence of a natural gas flame means the resulting product is free from bubbles, contamination and other defects.

Waste recovery for petrochemical wastes

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

Industrial air pollution control for the Coating and Printing industry

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Flexible materials, laminates and folding boxes made of paper, plastic and aluminium are being used for the packaging of various consumer goods.

Solutions for the food & beverages industry

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

Food waste in general has a high energy density. This results in high yields when producing biogas through anaerobic treatment. Biogas is a very flexible energy product with proven capabilities in the power, transportation, and heat demanding sectors. In this sector, anaerobic digestion offers significant cost advantages over traditional disposal methods. By upgrading the biogas into natural gas using a DMT Environmental Technology system, a solid business case with an interesting return on investment is assured.

Flaring Solutions for the Landfill Industry - Landfill Gas Combustor

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

As the need for reliable alternative energy sources increases, industries all over the world are looking for ways to fuel business while having the smallest impact on the environment. At ABUTEC, we’re proud to be part of this shifting focus on alternative energy sources, and offer solutions for waste-to-energy systems that can put waste gas to work for your plant.

Air pollution control for the energy recovery industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy conscious designs available today. We recommend analyzing these systems periodically to determine energy reduction opportunities. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

Hazardous and Special Wastes

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an environmentally benign product called Plasmarok®.

Need help finding the right suppliers?

Let the XPRTs do the work for you