Only show results in Virginia? Ok

Hydropower Plants Software

  • Showcase

    Visual Hydraulics - Version 4.2 - Treatment Plant Hydraulic Analysis Software

    That’s right, Version 4.2 is here. Version 4.2 marks our most powerful, flexible version ever. We've added more hydraulic elements, and more features that make the software easier to use. The biggest advancement of Version 4.2 is the addition of the flow split analysis tool. Visual Hydraulics can now determine how flow will be split among ...

    By Innovative Hydraulics based in Pittsburgh, PENNSYLVANIA (USA).

  • XP Solutions - Version xp2d - 2-Dimensional Overland Flow Module

    xp2D, a 2-dimensional overland flow module for xpswmm and xpstorm, gives you the power to analyse and predict potential flood extents, depth and velocity and accurately models the interaction of surface and underground systems in an integrated 1D/2D modelling environment. The so

    By XP Solutions based in Portland, OREGON (USA).

  • Surface Water Software

    The software Floris2000 was originally developed by the Laboratory for hydraulic engineering, hydrology and Glaciology of the ETH in Z├╝rich. The firm Scietec developed the user-friendly interface FluxDSS/Designer to facilitate the pre- and post-processing and improved some of the capabilities of the aforementioned code with regard to regulated ...

    By TK Consult AG based in Zurich, SWITZERLAND.

  • Inflow Forecasting Software for Hydropower Plants

    Inflow forecasting is essential to keep control of your resources. By managing your resources in an optimal way, you are able to plan the power production and maximise revenue from your assets. Inflow forecasting depends on several elements - weather forecasts, snow cover, ground conditions and the landscape. Powel inflow modeling and forecasting ...

    By Powel AS based in Trondheim, NORWAY.

  • TURBNPRO - Version KC4 - Hydroelectric Project Developers Software

    The essential software tool for: hydroelectric project developers, consulting engineers performing feasibility studies and preliminary project designs, water power systems educators. TURBNPRO is the only software of its kind created to develop information on hydraulic turbines, their selection and application under specific site conditions.

    By Hydro Info Systems based in Fairfield, NEW JERSEY (USA).

  • Premium

    Version CADET Edge - Dynamometer and Engine Controller Software

    The CADET Edge is part of the CADET range of control systems, designed specifically for dynamometer control and engine throttle actuation. The CADET system can actuate eddy current, hydraulic, AC or DC dynamometers and will be supplied with the appropriate power modules.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • HYDROFLO - Version 3 - Piping System Design Software

    HYDROFLO 3 is a powerful, yet easy to use Pump and Piping System Analysis software tool. Any type of incompressible liquid flow can be analyzed. Many types of conveyance systems can be modeled including open source/discharge, closed re-circulating and gravity flow systems. Industrial process, water supply, wastewater treatment, fire protection, ...

    By Tahoe Design Software based in Nevada City, CALIFORNIA (USA).

  • Version PCSWMM 2012 - Stormwater Management, Wastewater and Watershed Modeling Software

    PCSWMM's powerful GIS engine works seamlessly with the latest GIS data formats, and provides intelligent tools for streamlining model development, optimization and analysis in a comprehensive range of applications. With full support for the US EPA SWMM5 hydrology & hydraulics engine, PCSWMM provides a scalable and complete package for 1D & ...

    By Computational Hydraulics Int. (CHI) based in Guelph, ONTARIO (CANADA).

  • XP Solutions - Version xpswmm - Dynamic Hydraulic and Hydrologic Modelling Software

    xpswmm is a fully dynamic hydraulic and hydrologic modelling software that combines 1D calculations for upstream to downstream flow with 2D overland flow calculations so that you can see what truly happens to your stormwater system, foul water system or floodplain when waters flow, populations increase or catastrophic events ...

    By XP Solutions based in Portland, OREGON (USA).

  • InfoWorks WS - Water Distribution Modeling and Management Software

    InfoWorks WS provides a comprehensive model management solution that will enable analysis and management of distribution network models more efficiently and accurately than ever before. InfoWorks WS may be configured as a component of a corporate modeling solution or as a stand-alone desktop application. The combination of a fast relational ...

    By Innovyze based in Broomfield, COLORADO (USA). from Water Distribution Software line

  • SIMSEN-Hydro

    Simulation software for the analysis of electrical power networks, adjustable speed drives and hydraulic sytems.

    By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

  • OptiPower

    Custom-designed hydropower optimization tool.

    By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

  • HYKAS

    HYKAS is a powerful program, allowing dimensioning and detection of sewerage networks while meeting all standards for state-of-the-art hydraulic calculation software. Based on latest software technology, HYKAS provides you with all required calculation methods for dimensioning and detection of sewerage networks.

    By Rehm Software GmbH based in Berg/Ravensburg, GERMANY. from SEWERPAC Software line

  • FlowAnalyst - Flowmeter Data Management

    Unlock the power of your flowmeter investment. Your network of flowmeters and rain gauges is your finger on the pulse of your collection system. Maximize the value of this important investment with CSi's FlowAnalyst©. Turn your flow data into clear performance information, in an easy to use interface, for all of your key personnel.

    By Constantine Group based in Birmingham, ALABAMA (USA).

  • InfoWorks ICM RiskMaster

    A revolutionary risk-based analysis extension, InfoWorks ICM RiskMaster enables InfoWorks ICM to accurately compute both the damage caused by specific flood events and expected annual flood damage. Calculations are based on the hydraulic, hydrologic and economic data for any number of simulated damage receptors including residential, commercial ...

    By Innovyze based in Broomfield, COLORADO (USA).

  • PipePlan

    The engineering design of pressurized pipelines is a complex, time-consuming task. It requires compliance with a daunting number of design criteria, including pipeline minimum slope, maximum spacing between air release valves, intersection with existing utilities, and pipe cover. Meeting these criteria, along with quality assurance standards, ...

    By Innovyze based in Broomfield, COLORADO (USA). from Pipeline Design Software line

  • Bentley Water

    Bentley® Water is a comprehensive geospatial engineering solution for municipal water networks design and management. An integrated GIS and design environment coupled with an intelligent network model allow municipalities and utilities to address all operations of a typical water supply network. Bentley Water leverages all the advantages of ...

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from Geospatial Software line

  • FlowMaster - Hydraulic Calculator Software

    Doing hydraulic calculations in a spreadsheet is an error-prone process. FlowMaster helps you perform hydraulic calculations for dozens of element types, from pipes and open channels to drop inlets and weirs:

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA). from Haestad Software Software line

  • SVHeat - 2D/3D Freeze /Thaw Modeling Software

    SVHeat is designed for use by geotechnical / geoenvironmental engineers, geological engineers, and soil scientists. The software is able to calculate geothermal gradients and the movement of freezing fronts in saturated and unsaturated soils. Saturation levels may be imported from SVFlu . SVHeat allows you to analyze steady-state or transient ...

    By SoilVision Systems Ltd. based in Saskatoon, SASKATCHEWAN (CANADA). from Svoffice 5/GE Software line

  • Allocate - Version Ver. 3.0 - Optimal Unit Allocation Software

    Unit allocation / commitment is the process of deciding when and which generating units at each power station to start-up and shut-down. This process is very complicated when 2 or more generating units are considered due to the fact that the number of combinations increases exponentially with the number of available generating units. To solve this ...

    By Allocate based in Albany, NEW ZEALAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you