hydropower plant Equipment available in Maryland

Available in Maryland| Near Maryland
38 Results found

We couldn't find any hydropower plant equipment in Maryland

Here is a list of results available in Maryland

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Hydropower ×

  • Keyword: hydropower plant ×

  • Available in: USA ×

  • Available in: Maryland ×

Hydropower Plant

by Obermeyer Hydro, Inc.     based in Fort Collins, COLORADO (USA)

Extra head, provided by Obermeyer gates, results in increased power production by maintaining maximum allowable pond elevations at all times. Although head can be increased temporarily by use of flashboards, our gates offer many advantages: The 1 to 3 foot margins typically required to cause failure of flashboards cause unnecessary upstream ...

Small-Scale Hydropower Plants

by ANDRITZ Energy & Environment GmbH     based in Raaba bei Graz, AUSTRIA

The ANDRITZ HYDRO Compact Hydro Division is the world leader in products and services for small and medium-sized hydroelectric power plants up to a unit output of 10 MW for axial and Kaplan turbines and an output of 30 MW for Francis and Pelton turbines. Compact Hydro stands for “water to wire” solutions based on pre-designed modular ...

GUGLER - Model Francis - Water Turbines for Small Hydropower Plants

by GUGLER Water Turbines GmbH     based in Goldwörth, AUSTRIA

Available up to an output of 15 MW. Standardized design and highest efficiency guarantee exceptional profitability and a long lifetime.

GUGLER - Model Pelton - Water Turbines for Small Hydropower Plants

by GUGLER Water Turbines GmbH     based in Goldwörth, AUSTRIA

Pelton Turbines are used for higher heads and a smaller flows. They are exposed to enormous forces due to the high pressure application. Highest quality, from the raw materials to the manufacture, is therefore of outmost importance.

GUGLER - Model Micro - Water Turbines for Small Hydropower Plants

by GUGLER Water Turbines GmbH     based in Goldwörth, AUSTRIA

GUGLER Water Turbines has also developed a programme for micro plants with an output range of 5 to 50 KW. Pelton turbines, single and multi-jet. Francis spiral turbines, vertical. Kaplan bulb turbines. mobile and stationary design. It is needless to say, that also in this category we offer our proven and renowned quality starting from the design ...

GUGLER - Model Kaplan - Water Turbines for Small Hydropower Plants

by GUGLER Water Turbines GmbH     based in Goldwörth, AUSTRIA

The classic for the low head ranges and high flow rates. Available up to an output of 5 MW. Standardized design, highest efficiency and precision workmanship guarantee exceptional profitability and a long lifetime.

Small Hydro Power Plants

by CINK Hydro - Energy k. s.     based in Sadov, CZECH REPUBLIC

CINK Hydro-Energy is your partner in designing and constructing complete hydropower stations

GUGLER - Turn-Key-Plants

by GUGLER Water Turbines GmbH     based in Goldwörth, AUSTRIA

All the electro-mechanical equipment from a single source: Apart from our water turbines, control systems and hydraulic steel structures we offer our clients the entire electro-mechanical equipment for small hydropower plants such as valves, generators, low- and medium voltage switchgears, transformers and auxiliary devices - everything on a ...

Hydro Power Plants

by EPF Energy S.r.l.     based in Carrù (Cn), ITALY

A sole interlocutor for designing and installing of hydropower plants. EPF Energy is an EPC Contractor specialized in the designing and manufacturing of hydroelectric power stations in Italy and abroad. With internal skills that range from feasibility studies to project financing, from design to installation and commissioning, EPF Energy can ...

Hydro Power Stations

by Tuba Turbine GmbH     based in Frankfurt am Main, GERMANY

Hydropower plants harness water's energy and use simple mechanics to convert that energy into electricity. Hydropower plants are actually based on simple concept water flowing through a dam turns a turbine, which turns a generator. Here are the basic components of a conventional hydropower plant. Hydropower is considered a renewable energy ...

Modernization and Renewal

by ANDRITZ Energy & Environment GmbH     based in Raaba bei Graz, AUSTRIA

About 50% of the primary and secondary technologies installed in hydropower plants all over the world are older than 30 years. The market for modernizations, rehabilitation and capacity increases of installed hydropower equipment is mainly concentrated in Europe and North America. The ANDRITZ HYDRO Service & Rehab Division provides solutions, ...

Water Intake Systems

by Sorgent.e Srl     based in Padova, ITALY

Through its own operating structures and the synergy between its resources and external partners, STE energy is able to design and implement mechanical and hydraulic cut-off systems for hydropower plants.

Obermeyer Hydro - Water Turbines

by Obermeyer Hydro, Inc.     based in Fort Collins, COLORADO (USA)

Obermeyer Hydro designs and manufactures patented gates and bulkheads that incorporate arrays of compact submersible turbine generator sets. These systems comprise complete hydropower plants that may be installed in existing water control structures without cofferdam construction, without excavation work nor associated geologic risk, and without ...

Hydraulic Systems

by STE Energy     based in Padova, ITALY

Through its own operating structures and using its own resources and at times external partners, STE energy realizes and builds mechanical and hydraulic systems to be used in hydropower plants and in pumping stations, as it also has the qualifications with the major utilities.

GUGLER - Controls and Switchgears

by GUGLER Water Turbines GmbH     based in Goldwörth, AUSTRIA

The heart of every modern hydropower plant is a high-performance, automatic control system. Process visualisation, monitoring and remote control systems offering the possibility for remote diagnostics and maintenance are gaining more and more in importance.

Large New Installations

by ANDRITZ Energy & Environment GmbH     based in Raaba bei Graz, AUSTRIA

The ANDRITZ HYDRO “Large Hydro” Division is a global supplier of turnkey electromechanical equipment and services for the installation of large new hydropower plants (“water to wire”) and components, including installation beyond the compact hydro range.

Fish Guidance System – Bio Acoustic Fish Fence (BAFF)

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

There is an increased awareness of the impact of water abstraction on aquatic life and this is reflected by legislation in the USA and, increasingly in Europe, requiring abstractors of water to undertake measures to reduce the “impingement” and “entrapment” of aquatic species. Ovivo’s Bio Acoustic Fish Fence (BAFF) ...

Three Phase Synchronous Generators

by AEM-Anhaltische Elektromotorenwerk Dessau GmbH (AEM)     based in Dessau-Roßlau, GERMANY

The brushless, electronically controlled version of the AEM synchronous generator with integrated AEM voltage regulator (AVR) meets the highest standards in terms of technical parameters, performance, reliability and ease of maintenance. These machines are used worldwide for applications which include the on-board power supply on ships, hydropower ...

InnovaSonic - Model 210 - Ultrasonic Portable Liquid Flow Meters

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra’s InnovaSonic® 210 portable ultrasonic flow meter makes field-portability its primary feature.  The 210 replaces keyboards and cabling with a Bluetooth-enabled Android tablet PC to control data acquisition and processing.  Users can browse the collected data, perform statistical analysis, display graphs and perform ...

Great Wall Heavy Industry - sand machine,vsi vertical shaft impact crusher

by Zhengzhou Great Wall Heavy Industry Machinery Co.,     based in Huiji District, CHINA

The vertical shaft impact crusher is advanced and high-efficiency equipment. It is the latest researched results basing on Germany technology. The machine is professional in producing qualified sand and stone for highway, high-speed railway, high building, city project, hydropower dam constructions, and concrete mixing plant. It is widely used in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you