Incineration Applications available in Egypt

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Chemiluminescense based analyzer for industrial applications

    Whether combustion, waste incineration or power plant, most of the hot processes call for a measurement of the exhaust gas direct at the source by national laws and international standards. No matter where and at what concentrations nitrogen oxides have to be detected, you can depend on ECO PHYSICS analyzers to handle the job quickly, reliably and with a precision that is unmatched anywhere in the world. Whether at trace levels in a clean room environment or for the analysis of exhaust gases directly at the source, you will find the type of chemiluminescence detector (CLD) to perfectly suit you at ECO PHYSICS.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Continuous emissions monitoring in waste incineration plants

    Waste-to-energy through incineration of waste is an effective way of producing electricity and heat, at the same time getting rid of the possibly hazardous or unrecyclable waste. The waste can be incinerated at specific WtE plants or at plants with permission for co-incineration of waste at biomass boilers or cement kilns. The waste incineration plants are, however, governed by strict emissions regulations.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Harden Shredding Technology for Pulper Ropes

    Harden Shredding Technology for Pulper RopesHarden Industries Ltd. designs and manufactures a variety of high-capacity shredding solutions specially suited for paper shredding and pulp mill materials processing. With Harden’s low-speed, high-torque technologies, pulp and paper mills are able to increase overall mill efficiency by reducing waste volume and lowering fuel, storage and transportation/disposal costs. Paper & Pulp Mill Materials Processed Rag rope Baled corrugated (old corrugated containers) or old newsprint. Pulper waste Paper rolls/fiber cores Wire Slabs Pallets Packaging materials (shrink wrap, banding, etc.) Scrap raw fibers and wood Typical Shredding Applications 1. Pre-Incineration Shredding Shredded paper is easier to handle and meter-feed into an incinerator and burns more thoroughly and rapidly. 2. Fuel Preparation Shred in-plant waste into cost-effective boiler fuel 3. Bale Breaking or Preprocessing Shredding bales prior to pulping delivers consistently sized

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Tire shredding

    SSI offers a  variety of shredding solutions to process tires for cars, trucks, aircraft and agricultural to off-the-road (OTR) and mining equipment. SSI has many years and a great deal of experience in the supply of tire recycling machinery. We offer a broad range of sizes of tire shredders and have a world-wide installation base. Whether you’re just starting a tire recycling business, or you need to shred millions of tires each year, we have a system to meet your goals. We specialize in the supply of primary and secondary tire recycling systems, with options that can process any tire size made today, that can reduce whole tires to any size ½” (12mm) or larger. We do not offer “crumb rubber” production systems.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Filter presses for mining, metallurgical, chemical & pharmaceutical sector

    Mining sector is: beneficiation of metals (iron, nickel, copper, zinc), beneficiation of non-metals beneficiation of noble metals (gold, silver, platinum, palladium), coal processing, calcium carbonate and minerals in general (silicates, clays, kaolins, etc..)

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Premium

    Industrial Shredder For Municipal Waste Disposal

    With the growth of population and rapid development of the city, more and more municipal waste are produced and seriously influence our live and environment. Municipal waste also know as MSW, domestic waste and household refuse. Municipal waste should be shredded before burying or burning to save more storage space or to lower the transport cost for collecting. Harden has offered hundreds of excellent municipal waste shredding solutions for both individual or association project. Harden shreds any waste for a cleaner city and environment, please feel free to contact us for your customized shredding solution. Municipal Waste Disposal Methods Burying of municipal solid waste Incineration of municipal solid waste Pyrolysis and gasification of municipal solid waste Sorting and recycling of municipal solid waste Cooperative disposal of cement kiln Municipal Waste Shredding Technology Pre-shredding procedure Sorting and RDF disposal system

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Hazardous and Medical Waste shredder

    HARDEN designs and manufactures shredders and size reduction systems for safe disposal of hazardous, medical and pharmaceutical waste. HARDEN has extensive experience in the supply of purpose engineered reduction, fuel blending and destruction systems for the hazardous and medical waste processing industries.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Emissions monitoring for waste incineration

    Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Industrial wastewater solutions for contaminated landfill leachate

    Reliable treatment. Optimised for heavily contaminated landfill leachate. Whether it be household rubbish, construction rubble, contaminated soils, port sludge or waste incineration ash, final storage of these heavily contaminated materials poses a potential groundwater pollution risk from heavy metals, nitrogen bonds or organic substances. Landfill leachate resulting from precipitation on landfill sites.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Paint shop cleaning

    Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to hazards.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Measurement solution for QAL2 EN 14181

    BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Waste shredding for the waste-to-energy industry

    With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you