Only show results available in Virginia? Ok

Lubricating Oil Applications

  • Premium

    Monitoring of hydrocarbons in bilge water

    The Situation

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Specialty Cleaners and Lubricants for Food & Beverage Industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available upon request. Our lab will work with you to determine the best cleaner for your application.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Specialty Cleaners and Lubricants for Electronics Industry

    Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items.  They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals.  When rinsed properly our products leave absolutely no residue.  They are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    EDXRF spectrometers for petroleum & petrochemical

    Oil and fuel analysis - compliance with ASTM standard methods and other regulations. Xenemetrix state-of-the-art ED-XRF analyzers offer solutions for the Petroleum & Petrochemical analysis that comply with ASTM standards and regulations. Our superior solutions cover the full production process, starting from research & development up to process and quality control.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Ice blasting technology for pulp and paper

    Pulp and paper industry is one of the largest industries in the world. This industry deals with lots of harmful chemicals. Ice blasting is a non-abrasive and chemical free cleaning process with negligible airborne which is the answer to a range of cleaning issues.

    Applications for Coulson Ice Blast in the Pulp and paper industry sector:

    Ice:
    • Cleans all piping, valves, floor gratings, walls and machine structures of chemical residues.
    • Removes lime build-up from various walkways, stairs and tanks.
    • Cleans caustic chemicals from storage tanks.
    • Removes heavy petroleum lubricants from gear teeth.
    • Removes dirt, lime, grease and oil from motor drives and bearings.
    • Cleans a wide variety of residues including paper stock, bacterial growth and printing inks.
    • Removed dirt, grease, oil, pulp residue from paper rollers
    • Performed lead based paint abatement from steel beams and supports

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Kytola Oilan A4 for Paper Machine Circulating Lube Systems

    Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

    By Kytola Instruments Oy based in Muurame, FINLAND.

  • High performance separation system for lube oil industry

    Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been developed to address the inherent deficiencies of the conventional coalescers.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Oil Mist Separators for Shipbuilding

    A  Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination. Throughput: 1,200 Nm³/h @ 50 Hz.

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

  • Lubricating oils for oil & gas industry

    Lubricating oils contain chemical additives that give the oil a greater in-service life. These additives contain a range of elements such as Calcium, Zinc, Phosphorus, Magnesium, Chlorine, Molybdenum etc whose concentration need to be measured as part of a quality control/assurance system to demonstrate conformance to specification.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Compact Filtration for Turning / Milling

    CompactFiltration – Cooling lubricant filtration for turning / milling; For turning and milling processes the demands for internally cooled tools are constantly rising. Filtration of the cooling lubricant is a key factor in ensuring process reliability, which is why plant owners are focussing more and more on it.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Wastewater technology for the airports

    Airport operations lead to many different types of wastewater for example through general airport, hangar and logistics operations as well as refuelling and cleaning of the aircrafts. The effluent from the runways is contaminated with oils, lubricants, detergents and other chemicals.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you