Only show results in Virginia? Ok

Plasma Technologies equipment for Energy and Renewables

  • Showcase

    Cold Plasma Odor Control Plasma Injector

    Odor control by the Plasma-Injector is based on high speed oxidation. The oxidized molecules cannot be detected organoleptically, hence they do not bother the observer. The Plasma-Injector system consists of a stainless steel cabinet with Plasma Reactors.

    By Uniqair Technologies Ltd. based in Abbotsford, BRITISH COLUMBIA (CANADA).

  • Showcase

    Plasma Technology

    Our technology is driven by our expertise. In today’s competitive marketplace, success at Tetronics is increasingly driven by our expertise in technology. We build on 50 years of experience to deliver our best-in-class clean plasma technology to meet the often complex needs of our customers across a number of material recovery and treatment ...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    TOFMS - Plasma Profiling Systems

    Ultra-Fast, Sensitive and High Resolution Depth Profiling technique. The new Plasma Profiling TOFMS addresses the needs of materials scientists across a wide range of application areas. PP-TOFMS provides fast elemental depth distribution of almost any material. The speed and ease of use of PP-TOFMS aims at reducing the optimization time of growth ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Scientific Product line

  • Premium

    PlasmaPro - Model 100 Polaris - Single Wafer Etch for Tough Materials

    An evolution in single wafer etch technology - PlasmaPro 100 Polaris. With extensive experience of etching materials such as GaN, SiC and Sapphire, our technologies enable the cost of ownership and yield required to maximise the performance of your devices. The PlasmaPro 100 Polaris single wafer etch system offers smart solutions to produce the ...

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM. from Plasma Technology Product line

  • Premium

    Oxford Cobra - Highly Configurable Inductively Coupled Plasma (ICP) Etching Systems

    The Cobra ICP etch sources produce a high density of reactive species at low pressure. Substrate DC bias is independently controlled by an RF generator, allowing control of ion energy according to process requirements. Process chambers are available as standalone modules, with load locks or in cluster configurations on hexagonal or square transfer ...

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM. from Plasma Technology Product line

  • Premium

    Model IonO2x - Odor Elimination Systems

    IonO2x Odor Elimination Systems is a patented, true Non-Thermal Plasma (NTP) Technology that provides proven odor elimination of offensive organic odors. IonO2x Odor Elimination Systems can treat humid or dry process exhaust gases for any volume of air (single-unit systems for up to 60,000 CFM, and multiple systems for greater than 60,000 CFM).

    By United Agri Systems Canada Inc. (UAS) based in Abbotsford, BRITISH COLUMBIA (CANADA).

  • Tanks, Vessels & Bunds

    In addition to our pollution control systems and plasma waste elimination process, we specialise in corrosion resistant thermoplastic and GRP-clad tanks and process vessels, all of which we custom design and manufacture, taking into account such factors as content density, chemical compatibility, storage temperature and required capacity.

    By Simdean Envirotec Ltd based in Holmes Chapel, UNITED KINGDOM.

  • SPI - Plasma Cutting Plate

    When customers request plasma-cut plate products they are partnering with a company that has been combining precision CNC control with plasma torches for decades. Plasma-cut plate parts are produced with little or no finishing required, and the process delivers near-laser precision.

    By Stainless Processing, Inc. based in Coatesville, PENNSYLVANIA (USA).

  • PLASMADETEK - Model 2 - Plasma Emission Detector for Gas Chromatograph

    This microprocessor based plasma emission detector system gives all the tools to the GC integrator, manufacturer and user to integrate a plug and play detection system. With its customable configuration capability, a detector has never been so intelligent.

    By LDetek Inc. based in Thetford Mines, QUEBEC (CANADA).

  • MicroSys - Model 200 / 300 - Plasma Deposition

    The MicroSys system is designed as a cost effective and high-quality solution for various applications in research and for small scale production. The system control and vacuum components are incorporated in a single cabinet. It can be adapted to RIE, PVD and PECVD and can process different substrate sizes up to 200 mm / 300 mm in diameter. The ...

    By Meyer Burger based in Hohenstein, GERMANY. from Semiconductor- Coating Product line

  • Model PPT-ST - Steam Plasma Arc Torches for Transferred Mode

    The new generation of steam plasma arc torches is transferred mode direct current with power up to 600kW. The steam plasma arc torch PPT-st-600DC a length is 2140 mm and a diameter of 300 mm and a weighs about 80 kg. It was developed for special melting furnace, for this reason has such dimensions. It has a power up to 600 kW. The cathode are made ...

    By High Temperature Technologies Corp. (HTT) based in Chateauguay, QUEBEC (CANADA). from Plasma Arc Torches Product line

  • Thermal Spray

    Air Plasma Spray (APS), Conventional DC Plasma, High Enthalpy Plasma, High Velocity Air Plasma, Hybrid systems, Vacuum Plasma Spray (VPS/LPPS), High Velocity Oxygen Fuel (HVOF), Twin Wire Arc Spray (TWAS), CombustionSpray (Powder and Wire), Detonat'on Spray.

    By Surface Modification Systems, Inc based in Santa Fe Springs, CALIFORNIA (USA).

  • Piranha - Plasma Conversion System

    Abatement of global warming PFC gases. The semiconductor industry has committed itself to further reduce its emissions of perfluorinated compounds (PFCs), which give rise to the 'greenhouse effect'. Most semiconductor manufacturers have already begun to implement measures to combat PFC emissions, with PFC abatement a key part of an overall ...

    By Cs Clean Systems AG based in Ismaning, GERMANY.

  • Plasma Transferred Arc Powders

    Excellent resistance to corrosion and wear. Large field of applications include valve fittings for steam, oil, chemical products, extruder screws, diesel valves.

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND. from Coating - Consumables Product line

  • WPC Torches

    Westinghouse Plasma Corp.  torches are sophisticated devices but their purpose is simple – they are high temperature heating devices.At the most rudimentary level, plasma is just very high temperature thermal energy. In nature, plasma is produced by lightning when it superheats the air around a lightning bolt converting the air to ...

    By Westinghouse Plasma Corporation based in Madison, PENNSYLVANIA (USA).

  • MINIGUN - Thermal Spray Coating Systems

    Originally developed in 1995 for thermal spray coating systems, this compact, co-axial plasma torch known as the MINIGUN is our most compact and inexpensive solution for thermal applications. The MINIGUN can be fitted for radial injection of powders into the plasma plume. Used extensively by our own team for internal lab and pilot scale work, the ...

    By PyroGenesis Canada Inc. based in Montreal, QUEBEC (CANADA). from Plasma Torches Product line

  • ionCORE - Plasma Light

    ionCORE™ is the name we give to the unique technology that drives Ceravision’s brilliant plasma lighting solutions. It sits at the heart of everything we do and powers all of the various applications, both current and planned, across the Ceravision product and service range.

    By Ceravision Limited based in Milton Keynes, UNITED KINGDOM.

  • Plasma Water Table

    Virtually Eliminate All Airborne Pollutants. Large Noise Reduction. Reduced Fire Hazard. Decrease Material Warping Due to Heat. No Hot Slag & Dropouts on the Floor. Less Material Cleanup Time. Uses Existing Air Supply for Plasma Cutting Machine. Greatly Increases the Life of Grids or Grating. Cools Material Immediately for Easy Handling. ...

    By Frank Russell Inc. based in Shafter, CALIFORNIA (USA).

  • FORMICA - Model WPA-3000 - Plasma Cutting Machine

    The machine is designed for cutting sheets of carbon steel by means of a plasma torch and a gas. The metal sheet (eg. Size 1500x3000 standard) placed on a CNC table, then draw detail, or to load or ready to the control program, speed setting database and start cutting. When you start automatically cutting pieces of sheet metal, according to the ...

    By Metal Technik s.c. based in Lomza, POLAND.

  • PSC - Water/Gas Manifold

    The Water/Gas Manifold provides a central point to analyze and control the supply of torch cooling water and operating gas. It is custom-designed for each installation and built of high-grade stainless steel. To monitor cooling water and operating gas, PSC relies on top-of-the-line gauges and instruments from Sierra Instruments and Yokogawa.

    By Phoenix Solutions Company based in Minneapolis, MINNESOTA (USA). from Plasma Heating Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you