Energy & Renewables Equipment in North Carolina

513 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • In: USA ×

  • In: North Carolina ×

EnviroLogic - Model 3000 Series - Readily Biodegradable Hydraulic Fluids

by RSC Bio Solutions     based in Indian Trail, NORTH CAROLINA (USA)

The EnviroLogic 3000 Series consists of readily biodegradable synthetic hydraulic fluids designed for extreme operating temperatures and pressures. Because they’re formulated to provide exceptional oxidation and thermal properties, these products are ideal for mobile or marine hydraulic and propulsion systems operating in environmentally ...

EnviroLogic - Model 200EP Series - Readily Biodegradable Synthetic Gear Oils

by RSC Bio Solutions     based in Indian Trail, NORTH CAROLINA (USA)

The EnviroLogic 200EP Series is comprised of readily biodegradable synthetic gear oils for use in a wide variety of marine applications where incidental exposure of oil to the environment is of concern. In addition to being readily biodegradable and non-sheening, these products have unparalleled antiwear and extreme pressure properties, excellent ...

Pulse-Cleaned Air Filtration Systems

by Pneumafil LLC     based in Charlotte, NORTH CAROLINA (USA)

Pneumafil offers two types of self-cleaning pulse filter systems for gas turbine inlets: up-draft ('Pneuma-Pulse') and cross flow.

Well Watch - Model 600 Series - Line of Sonic Water Level Meters

by Eno Scientific     based in Hillsborough, NORTH CAROLINA (USA)

The Well Watch 600 Series is a line of sonic water level meters designed for semi-permanent installation. These units utilize sound waves and adaptive sensor technology to learn the makeup of a particular well allowing for the most accurate readings. The Well Watch meters were designed to be a solution for the long term monitoring needs of ...

EnviroLogic - Model 200 Series - Readily Biodegradable Synthetic Gear Oils

by RSC Bio Solutions     based in Indian Trail, NORTH CAROLINA (USA)

The EnviroLogic 200 Series is comprised of readily biodegradable synthetic gear oils formulated for industrial applications. These products have high antiwear properties, excellent corrosion and rust protection and outstanding system cleanliness characteristics. These proven products not only directly replace petroleum based products of the same ...

Static Air Filtration Systems

by Pneumafil LLC     based in Charlotte, NORTH CAROLINA (USA)

The Pneumafil multi-stage static intake air systems use a combination of time proven filtration components to provide high quality gas turbine inlet air. Each stage has a separate and distinct function that is vital to the overall system performance. Selection of the various stages of the system depends on the environmental conditions that will be ...

I-NOx - Integrated NOx Reduction System

by Fuel Tech, Inc.     Office in Durham, NORTH CAROLINA (USA)

Fuel Tech’s I-NOx Integrated NOx Reduction System combines proven technologies for cost-effective NOx control from the point of combustion to the stack. These combined technologies may be applied as a retrofit solution for existing units or may be new generating units, capable of NOx reduction exceeding 80%.

Model VEZ 2500 - High Capacity Shredder

by Vecoplan AG     Office in NORTH CAROLINA (USA)

The VEZ 2500 is a new high capacity shredder developed by VECOPLAN for the production of refuse derived fuels (RDF) from production and sorting waste, packaging material, as well as the high calorific fraction from domestic and commercial waste for the energetic use in cement and power plants.

HORIBA - Model PS-100E - Portable Permeation Dryer

by HORIBA Europe GmbH     Distributor in NORTH CAROLINA (USA)

The HORIBA permeation dryer PS-100E is designed as a compact and portable sample gas conditioning system in combination with the multi-component gas analyzer PG-250.

HORIBA - Model APNA-370 - Ambient NOx Monitor

by HORIBA Europe GmbH     Distributor in NORTH CAROLINA (USA)

The APNA-370 continuously monitors atmospheric NOX, NO2, and NO concentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and ...

Sarasin-RSBD - Safety Valve

by Weir Power & Industrial     Distributor in NORTH CAROLINA (USA)

Safety valves for over pressure and protective solutions. Spring loaded safety relief valves (Starflow, Series 9), Damped spring loaded relief valves, Atmospheric relief valves, Pilot operated safety relief valves, Changeover valves.

Evaporation System

by Environmental Recycling Alternatives, Inc.     based in Banner Elk, NORTH CAROLINA (USA)

EVAPORATION system is designed to efficiently evaporate waste waters and remove the settled solids buildup from the evaporator tank bottom. A submerged burner tube fires below the solution level, which achieves 95%+ energy efficiency. The hot gas contact with the liquid creates almost instantaneous vapor while the combustion gasses rapidly mix ...

Met One Instruments - Model WS-201 - Wind Sensor System

by Met One Instruments, Inc.     Distributor in NORTH CAROLINA (USA)

The WS-201 Wind Sensor System is designed to meet the need for a highly reliable, robust system. The electronic components in the wind speed sensor are conservatively rated and are completely solid state. The wind direction sensor uses a high-reliability potentiometer to sense the vane position.

Model E8500 - Portable Industrial Flue Gas & Emissions Analyzer

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

The E8500 is the Most Powerful & Advanced Portable Gas Analyzer on the Market, and is a Complete, Portable Tool for EPA Compliance Level Emissions Monitoring.

Met One Instruments - Model 50.5 - Solid State Wind Sensor

by Met One Instruments, Inc.     Distributor in NORTH CAROLINA (USA)

The 50.5 Solid State Wind Sensor is a continuation of the development work started with NOAA on sonic wind sensors over 25 years ago. This sensor design contains the same wind distortion algorithm and factoring that has been proven and accepted in applications around the world. No other sensor technology has the history of time proven field ...

THERMOX - Model TM2000 - Trace Oxygen Analyzer

by AMETEK     Distributor in Matthews, NORTH CAROLINA (USA)

The TM2000 Net Oxygen Analyzer protects industrial processes by quickly responding to changes using an industry proven zirconium oxide sensor.  It operates within a wide range of 0.1 ppm to 100% oxygen, and can accurately respond from atmosphere to low ppm oxygen levels in just seconds.  In addition, the TM2000 can detect excess ...

HORIBA - Model PG-350E - Portable Gas Analyzer

by HORIBA Europe GmbH     Distributor in NORTH CAROLINA (USA)

Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN 14792).

VAF - Fuel Consumption Measurement

by Mackay Communications, Inc.     based in Raleigh, NORTH CAROLINA (USA)

Due to the increasing awareness of the impact of exhaust emissions on the environment, combined with the continued increases in fuel costs, there is a great need for reduction in fuel consumption. This has led to a high demand for accurate measurement systems to monitor the fuel consumption per engine. Fuel consumption can be measured on ships, ...

Digester Gas Monitor

by RKI Instruments, Inc.     Distributor in NORTH CAROLINA (USA)

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator pulls a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, ...

Solid Recovered Fuels (SRF) Compact System

by Lindner-Recyclingtech GmbH     Distributor in Raleigh, NORTH CAROLINA (USA)

The two-stage shredding system is mainly applied for processing of domestic, industrial and commercial waste for the production of solid recovered fuel (SRF) in large scale industry (cement-, steel industry) and in power stations.

Need help finding the right suppliers?

Let the XPRTs do the work for you