Energy & Renewables Equipment in Vermont

70 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • In: USA ×

  • In: Vermont ×

Dynasonics - Model TFX Ultra Series - Ultrasonic Flow Meter

by Instrumart     based in South Burlington, VERMONT (USA)

The Dynasonics TFX Ultra Ultrasonic Flow Meter is a clamp-on ultrasonic flow and energy meter that provides accurate and repeatable measurements for full pipe liquid applications such as cooling lines, raw sewage flows, water distribution and processes where system shutdown is impossible. This versatile and accurate meter clamps on to the outside ...

QuikFoot - Solar Roof Mount System

by EcoFasten Solar     based in Morrisville, VERMONT (USA)

QuikFoot is a solar roof mount system designed for installation on new or existing (retrofit) composition shingle or slate roofs. The QuikFoot System includes a base plate installed with two self-drilling fasteners, providing an optimum pullout value and fast installation. When paired with an EcoFasten Solar compression bracket, the QuikFoot ...

LIN-KA - Model 1,500 - 10,000kW - Straw Heating Plant

by Lin-Ka Maskinfabrik A/S     Distributor in VERMONT (USA)

A straw heating plant can be built in many ways, depending on customer and operating requirements. LIN-KA has three basic construction methods depending on boiler size.

LIN-KA - Model 1,500 - 5,000kW - Woodchips Fired Heating Plant

by Lin-Ka Maskinfabrik A/S     Distributor in VERMONT (USA)

A woodchip heating plant can be built in many ways, depending on customer and operating requirements. LIN-KA has two main build types, which depend on such elements as boiler size and condition of fuel to be used etc.

SBE - Bank Hardeners

by SBE, Inc.     based in Barre, VERMONT (USA)

SBE’s Bank Hardener, offers a smaller, less expensive, more powerful and more reliable method of meeting your inverter or power conversion DC-link requirements. Enabled by the annular form factor Power Ring Film Capacitor, the Bank Hardener allows you to: Reduce up-front costs by using fewer capacitors and smaller bus structures, Reduce ...

Model 80m XHD - Wind Resource Assessment Systems

by Renewable NRG Systems     based in Hinesburg, VERMONT (USA)

Bundle your 80 meter tower with a logger kit and a sensor kit to complete the three-part NOW System. Significantly more cost-effective than purchasing components individually, this system offers a fully integrated, easy-to-install approach to wind resource assessment. RNRG offers free surface shipping to most major ports worldwide and directly to ...

WINDCUBE - Model 100S/200S/400S - 3D Doppler Wind Lidar

by Renewable NRG Systems     based in Hinesburg, VERMONT (USA)

Using the same core laser technology as WINDCUBE® v2 Lidar and Wind Iris Lidar, the WINDCUBE 100S, 200S, and 400S are utilized for advanced applications in wind resource assessment (onshore and offshore), wind turbine power curve measurement, short term forecasting, and wind turbine wake assessment. Scan scenarios are fully user configurable ...

Vertek - Model FFD - In-Situ Fuel Fluorescence Detector

by Vertek Cone Penetration Test Equipment     based in Randolph, VERMONT (USA)

Vertek’s In-Situ Fuel Fluorescence Detector (FFD) measures fluorescence produced by aromatic hydrocarbons when excited by ultraviolet (UV) light. This tool is designed to screen and define subsurface plumes and provide discrete depths for soil and groundwater sampling. Vertek’s FFD significantly reduces the time required to detect and ...

LIN-KA - Model 200 - 5,000kW - Wood Pellets Fired Steam Plant

by Lin-Ka Maskinfabrik A/S     Distributor in VERMONT (USA)

A steam plant which is basically a variation of a wood pellet plant for hot water. The boiler design is different in that steam is produced and an optional economiser is available for cooling flue gas, boiler fittings and pump unit.

DR - Model 11.50 Premier - Rapid-Feed Wood Chipper

by DR Power Equipment     based in Vergennes, VERMONT (USA)

The 11.50 PREMIER packs twice the power of 'bargain brand' chippers, handling limbs up to 3-1/2' thick with ease. A big hopper means you can drop material in with minimal pruning of side branches. And most material will self-feed, instead of you needing to force-feed it through. You'll process limbs 2-3 times faster and with far less fatigue than ...

TurbinePhD - Condition Monitoring System

by Renewable NRG Systems     based in Hinesburg, VERMONT (USA)

TurbinePhD is the most cost-effective and easy-to-use vibration-based condition monitoring system in the wind industry. This complete condition monitoring solution includes purpose-built hardware, automated analysis of the vibration data, and an intuitive web-hosted user interface. Unlike traditional condition monitoring systems, TurbinePhD was ...

WINDCUBE - Model v2 - Lidar Remote Sensor

by Renewable NRG Systems     based in Hinesburg, VERMONT (USA)

WINDCUBE is a remote sensing wind measurement device that uses pulsed Doppler Lidar technology to provide high quality data on par with an IEC calibrated met mast. Introduced to the market by LEOSPHERE, WINDCUBE has quickly become recognized as the market standard for superior performance for both wind resource assessment and wind farm performance ...

Model Eco-44 - Solar Roof Mount for Low Slope

by EcoFasten Solar     based in Morrisville, VERMONT (USA)

The Eco-44 System is a solar roof mount, engineered and manufactured specifically for use on low-slope/flat roofs. The Eco-44 System can be customized with different stand off and attachment bracket options, providing a customized solution for most low slope roof applications. The Eco-44 base plate is designed to be attached specifically to wood ...

LIN-KA - Model 400 - 3,000kW - Woodchips Fired Mobile Heating Plants

by Lin-Ka Maskinfabrik A/S     Distributor in VERMONT (USA)

LIN-KA´s mobile plants are complete heat generation plants housed in a special container. The only component external to the main container is a fuel container with scraper system, the chimney and ash container. These are located on the outside and connected through holes in the container walls.

Model Eco-65 - Solar Roof Mount for Low Slope

by EcoFasten Solar     based in Morrisville, VERMONT (USA)

The Eco-65 System is a solar roof mount, engineered and manufactured specifically for use on low-slope/flat roofs. The Eco-65 System can be customized with different attachment bracket options, providing a customized solution for most low slope roof applications. The Eco-65 base plate is designed to be attached specifically to wood blocking or ...

LIN-KA - Model 400 - 3,000kW - Wood Pellets fired Mobile Heating Plants

by Lin-Ka Maskinfabrik A/S     Distributor in VERMONT (USA)

LIN-KA´s mobile plants are complete heat generation plants housed in a special container. The only component external to the main container is a pellet silo, the chimney and ash container. These are located on the outside and connected through holes in the container walls.

Webiomass - Model 150 And 300 KW - Thermon Commercial Wood Pellet Boiler Systems

by Webiomass Inc     based in Rutland, VERMONT (USA)

Fully automated, programmable. Self cleaning boiler and burner. Auto de-ash system. Small footprint, Up to 90% efficient. Auto refill vacuum system. Easy to use/ operate/ maintain. Factory provided training. Factory comissioning.

Model Eco-44R - Solar Roof Mount System for Low Slope

by EcoFasten Solar     based in Morrisville, VERMONT (USA)

Engineered and manufactured using the same applied knowledge as the Eco-44, the Eco-44R solar roof mount system is designed to be used on all low-slope/flat roofs regardless of roofing substrate or insulation thickness with the use of ferrules. The Eco-44R System can be customized with different stand off and attachment bracket options, providing ...

Electric Powered Units

by Morbark, LLC     Distributor in Essex Junction, VERMONT (USA)

Morbark offers a large variety of units that can be equipped with electric motors from tub and horizontal grinders to whole tree chippers. As with all Morbark grinders and chippers, any machine can be customized to any application.

Wind Iris - Nacelle-mounted Lidar

by Renewable NRG Systems     based in Hinesburg, VERMONT (USA)

Wind Iris is the first Lidar dedicated to turbine performance assessment and optimization, providing accurate and highly resolved wind measurements upwind of the turbine rotor. Based on the leading pulsed Lidar technology, Wind Iris is also the first field proven turbine-mounted Lidar dedicated to power performance assessment and optimization. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you