Only show results in Texas? Ok

Energy and Renewables Equipment

  • Anaerobic Granular Plant

    Anaerobic granular technology based on the same principles as conventional microbiological digestion, but the reactor design is completely different. Another difference is that the waste water treated and not sludge, so that the organic material must be in a soluble form. The reactor configuration will exploit the natural ability of anaerobic ...

    By Purac AB based in Lund, SWEDEN. from Granular Technologies Product line

  • Whitham Mills - Wheelie Bins

    Whitham Mills design and supply a variety of patented container tippers. Key clients: Tesco Supermarket (20 x Roll cage tippers and 10 x Bin tippers). Norbert Dentressangle (Compactor tipper). Kimberley Clark (Bin tippers to feed the baler).

    By Whitham Mills Engineering Ltd based in Todmorden, UNITED KINGDOM. from Tippers Product line

  • Galaxy - Model P 30 GO - Generator Set

    Standard reference conditions temperature 25°C, altitude 100m asl, relative humidity 30%, atmospheric pressure 100 kPa (1 bar), power factor 0.8 lag, balanced load - non distortional. Fuel consumption is nominal and refers to specific weight 0,850kg/l. Sound power values refer to free field conditions: the installation site may influence the ...

    By Visa S.p.A. based in Fontanelle (TV), ITALY. from Insulated Range Product line

  • Macpresse - Model MAC 111L/1 - Baler

    The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output and efficiency thanks to the thrusting cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 111L/1 baler is the ...

    By Macpresse Europa S.R.L based in Vernate, ITALY. from Balers for MSW-RDF Product line

  • Macpresse - Model MAC 112 - Baler

    The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output and efficiency thanks to the compression cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 112/ baler is the largest ...

    By Macpresse Europa S.R.L based in Vernate, ITALY. from Balers for MSW-RDF Product line

  • Elkayam - Municipal Solid Waste Systems (MSW)

    MSW Systems take municipal waste after primary sorting to a rotating screen that divides the waste into principal categories (organic and non-organic), graded by size and density. The screen is fitted with bag-tearing elements to ensure that all plastic bags are opened. Non-organic material is passed to the sorting stage (PET, cardboard ...

    By Elkayam Industries Ltd based in West Bet Shemesh, ISRAEL. from Recycling Product line

  • Model 2002 - Trash Reduction System

    Single Chamber Trash Compactor - Trash Reduction System - Stainless Steel Model for Hospital Use is indicated as Model 2002 H. Model 2002 is Mild Steel Exterior w/ Stainless Steel Interior (Unit is listed UL). Also available with Stainless Steel exterior with Stainless Steel Interior for additional cost 

    By Chicago Compactors & Balers based in Barrington, ILLINOIS (USA). from Industrial Balers Product line

  • Copex - Model P2C and P3C - Baling Presses

    The P2C and P3C baling presses are used to compact all types of metal waste into high density bales conforming to the requirements of steel making plants and foundries. The scrap metal balers with double and triple compression have automatic operating cycle and continuous feeding by means of a grab or a conveyor. COPEX baling presses provide the ...

    By Copex based in Lanester, FRANCE. from Metal Recycling- Scrap Metal Baler Product line

  • Model BR P1800 (c) - Medical Waste Incinerators

    Burn-rite's BR P1800 (c) is a medical waste incinerator specifically designed to suit the need to incinerate medical waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site medical waste incineration.

    By Burn Rite Ltd based in Southport, UNITED KINGDOM. from Medical Waste Incinerators Product line

  • Model BR P220 - Medical Waste Incinerators

    Burn-rite's BR P220 is an incinerator specifically designed to suit the need to incinerate medical waste at the point of source. This compact machine was designed due to the increased demand for hygienic on site medical waste incineration.

    By Burn Rite Ltd based in Southport, UNITED KINGDOM. from Medical Waste Incinerators Product line

  • TeamTec - Model OG 400 - Incinerator

    With its sturdy and compact design and high performance the OG400C is one of our most popular models and an obvious first choice for solving the waste treatment onboard medium-sized vessels. Up to 512 000 kcal/h (596kW) – up to 81 l/h of sludge oil.

    By TeamTec AS based in Tvedestrand, NORWAY. from Incinerators Product line

  • TeamTec - Model GS 900 - Marine Incinerators

    The GS900C is one of the most effective, compact and environmentally friendly marine incinerators on the market today. The model is available with manual or automatic feeding of solid waste and full automatic sludge burning.

    By TeamTec AS based in Tvedestrand, NORWAY. from Incinerators Product line

  • Volkan - Model 1750 - Burning Mixed Waste Stream Incinerator

    The Volkan 1750 is a compact and efficient, fast burning mixed waste stream incinerator. Volkan, a range of highly efficient, technically advanced incinerator systems designed for quick clean and easy disposal of mixed waste streams including municipal waste, clinical and medical waste including type 4 pathological waste (red bag waste). The ...

    By Waste Spectrum Environmental Limited based in Checketts Lane, UNITED KINGDOM. from Volkan Products Product line

  • Landfill Gas

    Landfill gas is created during the anaerobic decomposition of organic substances in municipal solid waste (MSW) and commercial and industrial (C&I) wastes. Depending upon the landfill design and its management, as well as waste composition, compaction, moisture and several other factors, thousands of landfills are available worldwide to ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Biological Gases Product line

  • Model PAWDS Marine - Plasma Arc Waste Destruction System

    Recognized by the US Navy as the premier shipboard waste processing technology in the market, the Plasma Arc Waste Destruction System (PAWDS) is the world’s most compact, easy-to-operate, high temperature, plasma-based waste treatment system. With one-button rapid start-up and shutdown capabilities, PAWDS effectively destroys combustible ...

    By PyroGenesis Canada Inc. based in Montreal, QUEBEC (CANADA). from Plasma Waste Processes Product line

  • Ludden & Mennekes - Reloading Stationary Compacting Systems

    L&M stationary compacting systems are produced in different sizes including L&M waste reloading or loading stations. Depending on the customer requirements, they may be equipped with fully automatic couplings and decouplings, the required hoppers, light barrier controls, travel facilities for longitudinal and transverse travel carriages ...

    By Ludden & Mennekes Entsorgungs-Systeme GmbH based in Meppen, GERMANY. from Pressing Technology Product line

  • Vuototecnica - Model MV 20 and MV 20A - Oil-Bath Vacuum Pumps

    The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber ...

    By Vuototecnica UK Ltd based in Milton Keynes, UNITED KINGDOM. from Vacuum Pumps and Pumpsets Product line

  • PORT-A-BURN - Model PB1 - Portable incinerator

    PORT-A-BURN THE ONLY ORIGINAL PORTABLE INCINERATOR ON THE PLANET. All others are just copy's.Don't waste your money on expensive imitations .Don't settle for seconded best.WE WILL BEAT ANY GENUINE QUOTED PRICE. QUALITY DOESN'T HAVE TO COST.Cyclonic fan forced.Easiest to use of any portable incinerator. High Temperature over 1000 deg.3 time the lid ...

    By 3T Incineration Systems based in perth, AUSTRALIA.

  • Macpresse - Model MAC 108L/1 - Balers

    The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output efficiency thanks to the compression cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 108L/1 baler is the smallest ...

    By Macpresse Europa S.R.L based in Vernate, ITALY. from Balers for MSW-RDF Product line

  • TeeMark - Model DPC 60 - Drum Crusher & Drum Packer

    DPC 60 Model The TeeMark DPC60 Drum Crusher/Packer is designed to compact material inside 55-gallon drums as well as to crush drums. Hazardous or other waste materials can be packed inside a 55-gallon steel or fiber drum for disposal or incineration. Steel drums are pierced and crushed to 4 to 5 inches in 70 seconds.

    By TeeMark Manufacturing Inc. based in Aitkin, MINNESOTA (USA). from Drum Crushers & Packers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you