Only show results available in Virginia? Ok

Renewable Energy Applications

  • Diesel Air Filter Cleaning

    HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for inner Diameter Filter Outer Diameter: 20` Maximum for outer Diameter Filter Height: Up to 32` High – closed one end or open at both ends (Other sizes Available – Contact Mfg. For Details) Injection Cleaning System HOW THE INJECTION SELF-CLEANING SYSTEM (ICS) WORKS The Injection Self-Cleaning System releases compressed shop air through a rotating air jet that is driven up and down in a spiral motion inside the filter cartridge. In order to maintain the cabinet clean, an air pu

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Noise and vibration pollution control for wind power industry

    As a major source of renewable energy, wind turbines are continuing to experience exponential growth, with a production capacity that is doubling every three years. Reliability and the optimisation of maintenance have become major economic challenges for wind turbine operators.

    By ACOEM based in Limonest, FRANCE.

  • Mexico customer bought 6 sets waste tyre pyrolysis plant in 2013

    Mexico customer meeting for waste tyre pyrolysis plant In 2013, one customer from Mexico found us, after communicating with our project manager, this customer finally decided to buy 6 sets waste tyre pyrolysis plant, his machine finished installing and commissioning at August, and run well till now. Actually before cooperation with us, this customer already bought 2 sets from other suppliers, however he often meets problems when operating, till the end, machine can not operate normally. But this customer knows waste tire pyrolysis is absolutely a very good project, and has a bright future. So after careful consideration, customer decided to find new waste tyre pyrolysis plant supplier. Due to operating this machine before, this customer knows machine well, so this time, customer compared carefully, studied every component, even to very small unit. Finally he chose DOING as his cooperation partner, and bought 6 sets machine at one time. www.wastetireoil.com

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Nitrogen generation for the Marine, Oil & Gas industry

    Marine conditions pose a number of challenges and issues. Size, weight, rough sea conditions, corrosion, high temperatures, cargo needing protection, just to name a few.Oxymat’s Marine, Oil & Gas division produces nitrogen PSA generator systems to the marine industry with the necessary experience and know-how to address these issues. Compared to a traditional membrane based system, PSA systems significantly decrease redundancy and can cut energy consumption with up to 30%. In addition, a PSA system can produce 5% or lower oxygen levels.With the highest quality in components, PSA systems are extremely reliable with at least 48.000 running hours before CMS replacement is needed.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Industrial and commercial water filtration for effluent water treatment

    Through experience we have found that when the correct water filtration system is put into place as an integral part of the effluent water treatment process our customers have been able to experience several benefits:- Enabled water to be re-used in other areas of their operations as part of the effluent treatment process.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Dynamic Settlers for Harvesting Algae

    We are proud to let you know that with the Evodos Dynamic Settlers our customers achieve excellent results in harvesting algae. Today we have over 70 customers worldwide in the algae market. With Evodos, even the smallest algae (Nannochloropsis), fragile algae (Dunaliella and Diatoms) and both fresh and marine water algae are harvested successfully.

    By Evodos B.V. based in Raamsdonksveer, NETHERLANDS.

  • Premium

    Environmental compliance for the energy industry

    RegScan has developed an extensive array of unique online compliance solutions for the energy sector. Whether you`re an upstream, midstream or downstream oil and/or gas producer, we`ve got you covered. The RegScan One system is also ideal for utility companies as well as other mining operations.

    By RegScan, Inc. based in Williamsport, PENNSYLVANIA (USA).

  • Premium

    Specialty Cleaners and Lubricants for Healthcare Industry

    Our powerful, earth-friendly cleaners are available in a wide range of formulas to meet specific cleaning requirements.  Our cleaners are designed to quickly and effeciently remove blood, feces, urine, mucus, fat, sweat, tissue, and other biological debris.  Common uses include cleaning diagnostic and surgical instruments, life-support devices, hospital furnishings, and institutional linens.  For most applications a 0.5% - 2.0% solution is effective, and validation methods are available.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Solutions for the chemical industry

    Many organizations in the industrial sector are investigating possibilities to improve their (sustainable) energy profile. The renewable energy sector currently offers a broad scale of options with significant capacity for growth and new projects and expanding upon existing infrastructures. In the industrial sector, biogas can replace the current natural gas consumption. DMT has extensive experience within various industries and knows her way around. For more than 28 years we have been advising our customers on reducing CO₂ and SOx emissions, wastewater treatment and (bio)gas desulphurisation and upgrading.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.

    Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate

    Gas parameters: CH4 - CO2 - O2 - H2S

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Actuators for the water & sewage industry

    Water treatment and distribution offers significant opportunities for Rotork. With climate change affecting the availability of water in many areas of the world, there is an increasing need for processes which will maximise existing resources such as desalination plants and water re-use projects.

    By Rotork based in Bath, UNITED KINGDOM.

  • LifeFilta R20 Container & LifeFilta TapFilta for rural areas

    Many villages have no access to clean drinking water. Many still depend on wells, rivers and streams as their source of drinking water. To give water is to give life. Clean water can cut a community’s child mortality rate in half. It gives parents a powerful way to improve the health, hygiene, and the well-being of their children. The R20 Jerry Can would also be suitable for workers living in remote areas to obtain safe drinking water. The R20 can be filled with water from any source; river, lake, pond or stream and instantly provide clean and safe water. A family of five can use the R20 container for more than 5 years (assuming each person consume 2 liters of water per day). No replacement parts would be required.

    By LifeFilta based in BELGIUM.

  • Rugged Mobile Technology for Oil and Gas Industry

    Oil and gas personnel spend a large amount of time in remote pipeline locations and on oil rigs — environments that aren’t exactly gentle on technology. Our handhelds are tested to military standards for ruggedness, yet they’re also extremely compact, ergonomic and user-friendly. Handheld products allow you to easily capture data associated with resource-monitoring and transport tasks, and keep all your important information secure while you focus on doing your job efficiently and safely.

    By Handheld UK and Ireland Ltd based in Leamington Spa, UNITED KINGDOM.

  • Compliance management software for the energy and utilities industries

    Navigating the increasingly complex regulatory requirements can be tough for energy, oil and gas, and utilities companies. In order to effectively manage risk and stay compliant, organizations must establish proactive policies and have a systematic approach to their contracts.

    By Convergepoint based in Houston, TEXAS (USA).

  • municipal and industrial waste water treatment

    glass fused steel tanks are used as various digesters and reactors in municipal and industrial waste water treatment plants. * superior performance in corrosion resistance and against rust *factory fabrication tank . No painting or spray on erection site . * minimal maintenance cost * No need crane or other large equipment during erection * not subjected to severe weather and environment. * can be designed to future expansion, dismantle or re-movement. * free service for technical drawings * turn key service from proposal to tank commissioning .

    By Shijiazhuang Zhengzhong Technology INC. based in Shijiazhuang City, CHINA.

  • Biogas to Compressed Bio-methane

    For the sake of demonstration of the concept, a compressed Bio-methane solution can be supplied for as low as 5 m3 methane per hour. However, considering the cost of the plant, it becomes economically viable only above 6,000 m3 biogas per day capacity, which translates to approximately 2,400 kg bio-methane per day.

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

  • Alternative Fuel Production

    Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most anything in between.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Biogas Treatment & Utilization

    ADI Systems offers treatment of biogas for H2S removal using both biological and chemical-based scrubber technologies. ADI Systems can provide biogas utilization packages in the following applications: Internal Combustion Engines Gen-sets Microturbines Fuel Cells Boiler and Steam Generating Systems Sludge Dryers Contact ADI Systems to learn how we can help your facility reclaim energy from waste.

    By ADI Systems based in Fredericton, NEW BRUNSWICK (CANADA).

  • Fuel oil application of continuous pyrolysis plant for tire recycling

    Fuel Oil (45% to 52%) The main application of oil products produced by Doing continuous pyrolysis plant for tires recycling is the fuel oil that is wide used for industrial and commercial purposes. 45% to 52% oil of the amount of recycled scrap tires can be carried with licensed tanker trucks.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you