photovoltaic Equipment available in Macedonia

Available in Macedonia| Near Macedonia
521 Results found

We couldn't find any photovoltaic equipment in Macedonia

Here is a list of results available in Macedonia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Solar Energy ×

  • Keyword: photovoltaic ×

  • Available in: Europe ×

  • Available in: Macedonia ×

Model SAMKO 100 04 - Fully Automatable PV Junction Box

by KOSTAL Industrie Elektrik GmbH     based in Hagen, GERMANY

This universally usable and automatable solar module junction box enables you to fully automate processes when equipping solar modules with our junction solution. That means your solar modules can be fitted with both parts of our PV junction box without manual intervention. For a full automation from the fitting of the solar module up until the ...

TROSIFOL - Model R40 - Solar PVB Films

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL SOLAR R40 and all other TROSIFOL SOLAR PVB films are distinguished by their outstanding visual properties. For decades now, PVB has been the preferred plastic for safety glazing. These properties, combined with proven high long-term stability in outdoor applications even in non-edge-protected glazing, assure module manufacturers of the ...

TROSIFOL - Model SOLAR UV+ - PVB Encapsulation Film

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL SOLAR UV+ is a ground-breaking PVB encapsulation film with a modified formulation. This highly transparent film with outstanding UV transmittance increases the energy yield of crystalline UV-selective solar cells and CIS/CIGS thin-layer solar modules still further. The film shows excellent resistance to heat, UV radiation and other ...

TRINA - Model TSM-DC01, 165W to 180W - Solar Photovoltaic Module

by Enereco S.r.l.     based in Sarcedo, ITALY

Strenghts: Tolerance ± 3%. High Efficiency cells. Plug & Play connectors. Hight Transmission, low iron. Tempered glass.

Model PIKO - Photovoltaics Inverter

by KOSTAL Industrie Elektrik GmbH     based in Hagen, GERMANY

For us, 'smart connections' means compacting the wishes of our customers with the specialist knowledge at KOSTAL to create a marketable and unique product range. This philosophy has been perfectly implemented in relation to the PIKO inverter. Against this background, the portfolio of the KOSTAL Solar Electric offers 1- and 3-phase string ...

Model Photovoltaic Solar Panel - Photovoltaic Energy Systems (PV)

by Baymak     based in İSTANBUL, TURKEY

IEC 61215/61730-1/61730-2. TS EN ISO 9001. TS EN ISO 14001. TS ISG OHSAS 18001. TSE HYB 12690

BIPV-Building Integrated Photovoltaics

by FAR Systems S.p.A.     based in Rovereto, ITALY

Building integrated photovoltaics have to satisfy two principal needs: the production of renewable energy and the fulfilment of an architectural function. In brief, they have to serve the needs of man and those of the environment in which he lives. Architectural creativity and design must be expressed in harmony with functionality, ecology and ...

Alterna - Model QHP - Photovoltaic Modules

by Invent srl     based in Noventa di Piave - VE, ITALY

Invent QHP Alterna is the first alternating current photovoltaic module. With the module Invent QHP Alterna,  is no longer necessary to prepare complicated technical spaces to set up the photovoltaic system. In addition to the module no other equipment is needed since the functions normally carried out, up to now, by the inverter outside, now ...

Model QHP - Photovoltaic Module

by Invent srl     based in Noventa di Piave - VE, ITALY

The photovoltaic modules Invent QHP are produced in Italy, under certified quality by an automated line of high production capacity. The solar module Invent QHP is recognised for the exceptional quality of workmanship and its components. QHP modules are supplied with only positive tolerance (0 / + 6%). Invent modules will, in any case, produce the ...

Model XHP - Solar Photovoltaic Module

by Invent srl     based in Noventa di Piave - VE, ITALY

The solar modules Invent XHP are characterized by the exceptional quality of workmanship and components. They are supplied with only positive tolerance (0 / + 6%). Invent modules will, in any case, produce the same or more energy than the declared one, with consequent advantages for the purchasers.

Photovoltaics

by ALRESO Energy Solution     based in Münchberg, GERMANY

Be your own energy producer!The sun provides no invoice for you, therefore you should invest in a piece of financial independence. As a positive side effect you will contribute to environmental protection.The produced energy can be spend for your own private request or be feded into the national grid. Whether home or commercial use, due to the ...

Island Photovoltaic (PV) Systems

by Sustainable Heat & Power Europe GmbH     based in Grabow, GERMANY

The design of island photovoltaic (PV) systems is complex and requires know how and expertise. By definition, island systems are stand-alone photovoltaic systems without any connection to an electrical grid. They vary from grid-connected systems in that the plant must be specifically designed to react safely to different load requirements in order ...

Model PVAF-R - Arc Fault Detector

by Sensata Technologies Inc.     based in Attleboro, MASSACHUSETTS (USA)

Arc fault detector with stand-off mounting holes. Enables compliance with 2011 US National Electric Code (NEC 2011 Article 690.11). Up to 4 CTs / 4 strings per device. Each CT detects arcs on conductors up to 15A, 1000VDC (60A for entire device). Multiple devices can be nested for larger numbers of strings.

Kyocera - Kyocera Solar

by Aton-Solar     based in Laichingen, GERMANY

As a pioneer in the photovoltaik sector, Kyocera Solar can look back on over 35 years of experience. Kyocera Solar is also involved in numerous future-oriented solutions across the world. Focus: innovation and quality!

Teknek - Ergonomic DCR Hand Rollers

by Technica, U.S.A.     based in San Jose, CALIFORNIA (USA)

Teknek, the world leader in contact cleaning, has now revolutionised their hand held product range. Leading edge ergonomic design combined with the latest advances in cleaning core technologies makes improving your yields simple and reliable.TEKNEK CLEANING CORE   made in Teknek.The combination of our elastomer rubber and engineered ...

Lampion - Model 2/80 - 2/85 - 2/90 - Photovoltaic Solar Lamp

by Sunerg Solar s.r.l.     based in Citta' di Castello (PG), ITALY

Photovoltaic solar lamp is an independent lamp working with solar power. Made up by solar modules, batteries, control electronic desk, plus a high efficiency lamp, with street tower. Particularly useful to lighten small squares, crossroads, places where it is difficult to connect lamp to local grid. Functioning is granted by charge regulator, 7/9 ...

Polycrystalline Solar Modules

by IMAM AMBIENTE s.r.l.     based in Torino, ITALY

Photovoltaic cells are made of special materials called semiconductors such as silicon, which is currently used most commonly. Polycrystalline silicon is blue with large color difference.Polycrystalline silicon:the wafer is not homogeneous and is organized in grains locally ranked, it s obtained by recycling discarded electronic components, ...

Monocrystalline Photovoltaic Modules

by IMAM AMBIENTE s.r.l.     based in Torino, ITALY

The solar cell is basically composed of silicon that comes in black or blue depending on whether polycrystalline or monocrystalline, ranging in size from 10 to 12 cm. Monocrystalline silicon is black with small color difference.Monocrystalline silicon: the cell formed by monocrystalline silicon, is made by a wafer whose structure is homogenous ...

Precipitation Electrodes/Chucks

by Schunk     based in Heuchelheim, GERMANY

Polysilicon deposition using the Siemens process requires graphite electrodes of the highest purity. Schunk has developed special cleaning processes to reduce unwanted dopants such as boron and phosphorus to a low ppb range. Every batch is analyzed before delivery, and is subject to strict approval criteria.

Insulation Tubes

by Schunk     based in Heuchelheim, GERMANY

Our special OxaTherm® materials are manufactured from soft graphite felts and stabilized by chemical vapor infiltration with pyrolitic carbon (PyC). The component can also be subsequently protected against chemical damage by silicon carbide (SiC) infiltration. We are happy to take into account your specific requirements throughout the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you