solar collector Equipment available in Guinea

Available in Guinea| Near Guinea
122 Results found

We couldn't find any solar collector equipment in Guinea

Here is a list of results available in Guinea

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Solar Energy ×

  • Keyword: solar collector ×

  • Available in: Africa ×

  • Available in: Guinea ×

Model KPR11+ - Solar Collector

by REGULUS spol. s r.o.     based in Praha, CZECH REPUBLIC

Flat plate collector for portrait installation, 123x203 cm, aperture area 2.31 sqm, aluminum case, solar prismatic glass, harp type full plate absorber with Mirotherm selective surface on aluminum sheet laser welded to copper pipes. Solar Keymark certified.

Model KPC1+ - Solar Collector

by REGULUS spol. s r.o.     based in Praha, CZECH REPUBLIC

Flat plate solar collector, 203x103 cm, aperture area 1.92 sqm, for portrait installation, aluminum case, solar prismatic glass, harp type aluminum absorber with highly selective Alanod Mirosol surface, laser welded to copper risers, 4x Cu22 connection points, fluid volume 1.37 l.

Model KPI1 - Solar Collector

by REGULUS spol. s r.o.     based in Praha, CZECH REPUBLIC

Flat plate solar collector for in-roof installation, 122.5×206.1×10.7 cm, aperture area 2.32 sqm, wooden frame, solar glass, double-harp aluminum absorber with highly selective TiNOx surface, laser welded to copper risers, 2 upper connections Cu22, fluid volume 1.7 l.

Absolicon - Model X10 PVT - Solar Collectors

by Absolicon Solar Concentrator AB     based in Härnösand, SWEDEN

Electricity and heating in the same solar energy system.The PVT model produces thermal heat up to 75°C and solar electrical power, 230 V.  The installation produces a high rate of energy efficiency and options for upgrading with new technology.Our solar concentrator technology is based on over 20 years of Swedish research. By focusing the ...

Model SMG - Solar Collector

by Jiangsu Micoe Solar Energy Co.,Ltd     based in Lianyungang City, CHINA

Diffuse solar radiation can be efficiently absorbed even in cloudy days.Virtually unaffected by wind and environment temperature.Gather energy from the available light rather than outside heat.Hot water can be provided even in cold winter.High performance, even in adverse weather conditions due to vacuum insulation.The heat-pipe technology ensures ...

Model PV-T Hybrid - Solar Collectors

by Solimpeks Enerji A.Ş.     based in Karatay, TURKEY

Photovoltaics (PV) are semi-conductors and operate in a paradox – they need sunlight to generate electricity but suffer a degradation in performance as they get hotter. Standard PV Panels typically only convert 10-15% of solar radiation into electricity and the rest is dissipated as waste heat. PV-T stands for Photovoltaic-Thermal and ...

Manifold Heater - Solar Collectors

by NP Solar Ltd     based in Shunyi Distrcit, CHINA

solar collector is water heated by the use of solar energy. Solar heating systems are generally composed of solar thermal collectors, a fluid system to move the heat from the collector to its point of usage. The Integrated solar water heater may use electricity for pumping the fluid, and have a reservoir or tank for heat storage and subsequent ...

Absolicon - Model MT10 - Solar Collectors

by Absolicon Solar Concentrator AB     based in Härnösand, SWEDEN

Steam and process heat for industry.Efficient solar collector with a high degree of efficiency at high temperatures. The system is designed to run industrial processes.Absolicon MT10 generates solar heat and solar steam up to 160°C. The heat can also be used for solar cooling. Absolicon’s solar concentrator technology is based on over 20 ...

Model FI - Large Solar Collector

by TiSUN GmbH     based in Söll, AUSTRIA

Don‘t you want to use your rooftop for something more than just insulation and protection from the rain? The TiSUN in-roof collector not only insulates your roof but also provides you with additional solar energy. It can be used for all roofs with standard sizes ranging from 4 to 18 m2. However, it can also be manufactured in custom sizes or ...

Model FA - Large Solar Collector

by TiSUN GmbH     based in Söll, AUSTRIA

The ‘large‘ FA is suited to on-roof and freestanding installation on pitched and flat roofs or on the ground. It is manufactured and supplied as a single-piece large-area collector in sizes ranging from 3 to 18 m2 and has a forward and a return flow connection.

TiSUN - Model PFM - Module Solar Collector

by TiSUN GmbH     based in Söll, AUSTRIA

The Plug & Flow module collector (= PFM): The next generation. Flexible to install and use, the PFM is the ultimate benchmark, thanks to the new TiSUN collector mounting concept, based on the proven frame construction, and its aesthetic appeal. The collector is distinguished by its state-of-the-art manufacturing technology and optimised ...

Model 2.1 AV - Vertical Thermic Solar Collector

by F.D.E. Solar Srl     based in Cologna Veneta (VR), ITALY

The thermic solar collector FDE 2.1 with selective flatbed has a high absorbing surface area, a high efficiency, an easy way of mounting easy connection and a modern design. Suitable for all applications in the field of solar thermal systems, it is adaptable to different surfaces, either flat or pitched roof, while also allowing the installation ...

Model 2.6 MV - Vertical Thermic Solar Collector

by F.D.E. Solar Srl     based in Cologna Veneta (VR), ITALY

The thermic solar collector FDE 2.6 with selective flatbed has a high absorbing surface area, a high efficiency, an easy way of mounting easy connection and a modern design. Suitable for all applications in the field of solar thermal systems, it is adaptable to different surfaces, either flat or pitched roof, while also allowing the installation ...

Model OP-V2.5 - Flat Solar Collectors

by Openplus Ltd     based in Estarreja, PORTUGAL

Flat solar collector OP-V2.5 with high efficiency, for vertical or horizontal assem­bly. Hydraulic circuit in copper grid, with high selective copper plate absorber. The collector was designed for large installations. Due to its high yield, this collector is ideal for applications with large consumption of hot water directly or for those ...

Model OP-V2.3 - Flat Solar Collectors

by Openplus Ltd     based in Estarreja, PORTUGAL

Flat solar collector OP-V2.3 with high efficiency, for vertical or horizontal assem­bly. Hydraulic circuit in copper grid, with high selective copper plate absorber. The collector was designed for large installations. Due to its high yield, this collector is ideal for applications with large consumption of hot water directly or for those ...

Model 2.1 MV - Vertical Thermic Solar Collector

by F.D.E. Solar Srl     based in Cologna Veneta (VR), ITALY

The thermic solar collector FDE 2.1 with selective flatbed has a high absorbing surface area, a high efficiency, an easy way of mounting easy connection and a modern design. Suitable for all applications in the field of solar thermal systems, it is adaptable to different surfaces, either flat or pitched roof, while also allowing the installation ...

Model 2.6 AV - Vertical Thermic Solar Collector

by F.D.E. Solar Srl     based in Cologna Veneta (VR), ITALY

The thermic solar collector FDE 2.6 with selective flatbed has a high absorbing surface area, a high efficiency, an easy way of mounting easy connection and a modern design. Suitable for all applications in the field of solar thermal systems, it is adaptable to different surfaces, either flat or pitched roof, while also allowing the installation ...

Model JHC-5818 - Heat Pipe Solar Collector

by Jiaxing Jinyi Solar Energy Technology Co.,Ltd.     based in Jiaxing City, CHINA

Metal Heat Pipe Solar Collector consists of a vacuum tube, a heat pipe, a metal heat absorption wing and the connecting manifold. The metal heat absorption wing with selective absorption coating converts solar energy into heat energy and transfers it medium liquid inside. The vacuum between the two glass tubes works as insulation. The liquid in ...

Model OP-V2 - Flat Solar Collectors

by Openplus Ltd     based in Estarreja, PORTUGAL

Flat solar collector OP-V2 with high efficiency, for vertical or horizontal assem­bly. Hydraulic circuit in copper grid, with high selective copper plate absorber. The collector was designed for large installations. Due to its high yield, this collector is ideal for applications with large consumption of hot water directly or for those ...

Model KPG1 - ALC - Flat Plate Solar Collectors

by REGULUS spol. s r.o.     based in Praha, CZECH REPUBLIC

Flat plate solar collector, 117x215x8,3 cm, aperture area 2.39 sqm, aluminum case, solar glass, harp type copper absorber laser welded to aluminum sheet with highly selective Eta Plus surface, 4x Cu22 connection points, fluid volume 1.7 l. The frame design enables either portrait or landscape installation.

Need help finding the right suppliers?

Let the XPRTs do the work for you