Solar Glass Articles

  • Case study - Glass Roof

    Glass roof - Donnington Park Hotel System kWp: 7.68 Area: 86 m2 Inverter: Fronius IG Plus 60V-1 Modules Used: PS-CT-64 20% transparent Polysolar helped design a fully integrated transparent PV roof on a new build garage in Leicestershire using our new PS-CT 20% transparent panels and GB-SOL RIS system. Objective: Provide a fully integrated transparent solar PV roof ...


    By Polysolar Limited

  • Case study - Future Business Centre - Cambridge

    System kWp: 4.6 Area: 57 m sq Inverter: Aurora Modules Used: PS-A opaque, PS-C transparent Double Glazed Unit (DGU) Polysolar was requested to provide the PV glazing for the stairwell curtain walling and the decorative rainscreen cladding. This saw the first truly transparent curtain wall elements employed in the UK and a BREEAM rating of Excellent. ...


    By Polysolar Limited

  • Green Acres, the largest solar farm in Western Canada

    Hutterite colony invests in solar for business reasons You’ve seen them before, though they don’t tend to stand out. Hutterites—women in bright coloured, identical dresses and men in somber, dark jackets and hats. They’re almost always at the farmer’s market on a Saturday morning selling fresh eggs, carrots and potatoes. ...


    By Green Energy Futures

  • Dye–sensitised solar cells using TiO
    2
    nanoparticles: a review

    Over the past two decades, several research papers have been published on dye–sensitised solar cells ever since its conception was first reported in 1991. This paper discusses their basic principle, fabrication in the laboratory and developments, based on results reported in literature. The various factors which stand in favour and against their commercialisation and their characterisation by ...


    By Inderscience Publishers

  • Visible and solar light photocatalytic disinfection of bacteria by N-doped TiO2

    A water treatment system was developed based on a photocatalytic process, employing immobilized N-doped TiO2, which worked under solar radiation. Batch reactor studies were conducted using an immobilized and suspended form of N-doped TiO2. Activities of Degussa P-25 and N-doped TiO2 were compared. Optimization of catalyst concentration was also carried out. Reaction rates ...


    By IWA Publishing

  • Effect of Au nanoparticles added in nanocrystalline TiO
    2
    film on the photoelectrode of dye–sensitised solar cells

    In this study, we used a citrate reduction method and electrophoretic deposition (EPD) to prepare hybrid nanocrystalline TiO2/Au films and applied it to the photoelectrode of dye–sensitised solar cell. The films and solar cells were investigated by field emission scanning electron microscopy (FE–SEM), energy dispersive X–ray analysis (EDX), X–ray diffraction (XRD), I–V ...


    By Inderscience Publishers

  • In situ indium–induced crystallisation of low temperature nano–poly silicon (LTNPS) thin film on ITO glass substrate

    For the first time, the low temperature nano–poly silicon (LTNPS) thin films were formed on indium tin oxide (ITO) glass with a temperature of ∼200ºC using the in situ indium–induced crystallisation of the plasma enhanced CVD (PECVD) deposited a–Si. Compared with the conventional method for transfer of the PECVD formed amorphous structure to the nano–poly one, the technology features a low ...


    By Inderscience Publishers

  • The Future of Nano Coating Solar Street Lights

    Although it is commonly thought that shade is the worst threat to a solar panel’s productivity, dirt can be an even greater problem. As dirt, dust and debris like bird poop collect on its surface, the productivity of a panel is markedly reduced over time unless cleaned regularly. While doing such maintenance might be easy for small, compact array, the time and labor it takes to ...


    By Greenshine New Energy LLC

  • Solar Streetlights in Extreme Weather

    Nature is brimming with its different forces. They are all meant for good but can have a damaging effect on other items that it comes into contact with. Take for example anything that is outside but is not natural. It can easily get damaged by water and get rusty. Even natural things can be blown away or struck down by the very same beautiful nature. It is very easy to assume that ...


    By Greenshine New Energy LLC

  • Simulation and performance analysis of superstrate Cu(In,Ga)Se 2 solar cells using nanostructured Zn 1– x V x O thin films

    In this paper, we describe in the first step the structural, electrical and optical properties of the nanostructured Zn 1– x V x O thin films deposited on glass substrates by rf-magnetron sputtering using aerogel nanoparticles synthesised by the sol–gel method. The best properties, satisfying the role of window and buffer layers, were achieved, ...


    By Inderscience Publishers

  • Solar Energy and Power Importance

    Have you ever wondered why solar energy or power is important? You are not alone in this because it is the common question of all. Before we can understand why solar energy is important we should have a good idea of what solar energy is. Solar energy is produced by the sun. It can be harnessed like any other type of energy and used to ...


    By Greenshine New Energy LLC

  • Solar`s Time to Rise and Shine.

    Photovoltaic efficiency records are being shattered, thanks to recent advances in materials science. Last month, a researcher at the National Renewable Energy Laboratory in Golden, Colo., loaded a postage stamp–sized solar cell onto a tray and placed it under a high-intensity pulse solar simulator. The simulator flashed a 2.5 millisecond pulse of light, and 19 mirrors reflected the ...


    By Ensia

  • The comparison of several silicon solar cells

    The solar cell is also known as the "solar chip", it is a kind of photoelectric semiconductor wafer that works by solar energy. Solar energy refers to solar radiation energy. Since the formation of the earth, organism mainly light and heat, provided by the sun to survive, and as a method of food preservation, such as salt and salted fish. But nowadays, the ...


    By Greenshine New Energy LLC

  • Effect of Na and Ti–doping on photovoltaic properties of CuInS
    2
    solar cells

    CuInS2 (CIS) films were deposited on In2S3/TiO2/FTO/glass under air by spray pyrolysis, resulting in superstrate–structured solar cells. We found a significant difference of images between scanning electron microscope and optical microscope, which suggests ...


    By Inderscience Publishers

  • Cu
    2
    Te solar cells fabricated by printing

    Cu2Te particles were synthesised by ball milling and then printed on an In2S3/TiO2/FTO–glass substrate, resulting in superstrate–structured solar cells. The as–prepared Cu2Te particles were amorphous, but their ...


    By Inderscience Publishers

  • Global and China Solar Cell and Module Industry

    “2011-2015 Deep Research Report on Global and China Solar Cell and Module Industry” was professional and depth research report on global and China Solar Cell and Module industry. Firstly, the report has introduced Solar Cell and Module basic information such as Solar Cell and Module definition classification and manufacturing process product specifications. Then introduced global and ...


  • “Energy Film Uses Nanoparticle Technology to Save Energy”

    Energy Film in Portland, OR, has developed a thin layer of film that is applied to glass that saves energy by using nanoparticle technology to reduce solar heat gain, block UV radiation, and retain heat in winter. Energy Film is a subsidiary of Artscape, Inc. which has been doing business world-wide since 1997,While there are other products in the performance film industry there at least three ...


  • Optimum performance solar cells using atmospheric pressure chemical vapour deposition deposited TCOs

    High performance transparent conducting oxides (TCOs), have significance for optimising PV performance. We have developed an advanced atmospheric pressure chemical vapour deposition process, by applying fast experimentation and using a combinatorial chemistry approach to aid the studies. The deposited films were characterised for crystallinity, morphology (roughness), haze and resistivity to aid ...


    By Inderscience Publishers

  • Transparent conducting oxides superstrate for thin film solar cells: an industrial prospective

    The demand for a TCO coated glass substrate as a base material and front electrode of the solar cells is expected to grow very strongly in the next few years. Therefore it is crucial to prepare the industrial tools and proper glass compositions to meet this very impressive demand. Mass production of extra clear glass and atmospheric pressure thermal CVD tool installed directly on the float glass ...


    By Inderscience Publishers

  • Study of photoluminescence quenching and DC conductivity measurements in polymer-SWNT composite films for various SWNT concentrations

    Conducting polymer-SWNT composite films have a high potential in the area of photovoltaic devices and light emitting diodes (LEDs). SWNTs have high electron affinity and high mobility for electrons. As a result of this, the separation of photoinduced charges in the solar cell is very fast and efficient. For LEDs, the polymer-SWNT composite films act as efficient electron transporting layer (ETL). ...


    By Inderscience Publishers

  • Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you