Only show results available in Virginia? Ok

Solar Photovoltaics Applications

  • Solutions for solar, energy & environment sector

    When it comes to energy production and protecting the environment, going down new paths is more critical than ever before. We do just that. SCHOTT Solar has more than 50 years of experience in solar technology and combines expert knowledge in receiver technology for solar power plants with parabolic trough technology and photovoltaics under one roof. Welcome to the future.

    By SCHOTT AG / SCHOTT Solar CSP GmbH based in Mainz, GERMANY.

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Thin-film Measurement Technology for Automotive Industry

    With new innovations in the automotive industry, the need for accurate and robust measurement methods has become relevant. IST’s sensing solutions satisfy this need. Thin film platinum temperature sensors capable of measuring up to +1000°C provide precise measurement solutions for diesel engine applications. Additionally, thermal mass flow sensors are capable of monitoring vital fuel and engine systems in these harsh conditions. IST’s humidity sensors are also largely applicable in the control of cabin conditions.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Thin-film solar cells analysis for energy industry

    The research and development in the field of thin-film solar cells is an on-going process to improve efficiency even further, and to reduce manufacturing costs. X-ray fluorescence (XRF) is a field proven technology enabling users to control critical properties during development and manufacturing of the solar cells, such as elemental layer thickness and composition, improving quality and productivity, with resultant cost savings.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Metrology for the photovoltaics industry

    Quality control to maximize efficiency is critical in the competitive photovoltaic industry. For some time solar texture has been thought to qualitatively affect solar cell efficiency. However, through large-area, 3D measurements and areal feature parameters, quantitative correlation of texture to efficiency has only recently been obtained. We now know that ISO 3D surface parameters linearly correlate with solar cell efficiency.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Photovoltaic Plant Monitoring

    By Nethix S.r.l. based in Castelfranco Veneto (TV), ITALY.

  • Evaporators technology for photovoltaic & Microelectronics industries

    The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Industrial solutions for remote monitoring

    Supervision and maintenance on those locations without internet wired connection requires high personnel cost and also means a slow reaction in case of malfunction events and alarms. For companies with a big amount of remote location centers (such as repeaters of operators and telephone companies, production and distribution centers for energy manufacturers or photovoltaic/eolic plants), maintenance and supervision labors involve disproportionately high costs.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Premium

    Process technologies for making solar cells

    Oxford Instruments Plasma Technology has developed a number of processes for the production of Photovoltaics (solar cells) using our flexible and powerful tools and with key technologies.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Energy Storage

    The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control algorithms to be applied. As a supplementary service for investors and banks, K&S performs a technology and supplier evaluation in an technical risk assessment regarding the project. A first project with >30 MWp installed capacity in Japan with special requirements of the energy supplier and a nearly 20 MW battery power has already successfully been modeled by the K&S experts. For mor details please visit www.krugundschram.com

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • UAE Solar Street Lighting

    Solar Street Lighting, The new Solar Street Lighting Systems available are state of the art and come with new and creative designs whilst maintaining the highest standards in manufacturing:- Robust, Solar PV Tube Warranties, Electronic Management Warranties, Battery Manufacturers Warranties, Solar PV Modules is vertically integrated within the Poles, Monocrystalline Silicon Wafer PV Construction, Solar Stand Alone Solutions, 7 Day Battery Back Up Power, Full Communication between Solar lights and Service Centre,

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • Water treatment research for microelectronics industry

    As devices get smaller and the fabrication plants get larger, the purity of the water required for ultrapure water systems increases. In terms of water reuse, the industry has relatively conservative attitudes towards recycling water for ultrapure water applications, but wastewater is treated and reused for cooling and other less critical purposes. Besides semiconductors, two other silicon-based sectors of the microelectronics industry need large volumes of highly pure water: flat panel displays (FPD) and photovoltaics (PV). Although, both sectors are in the process of maturing we anticipate that the increasing complexity of FPD and PV devices will create demand for even higher purity water.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Integrated real-time gas analysis solution for solar PV industry

    Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic materials.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Waste gas & wastewater treatment for the solar industry

    Generating solar energy is considered `green technology`, even though the production of solar cells based on silicon predominantly uses process stages that have been common practice in the semiconductor industry for many years. As in the semiconductor industry the production of solar cells employs dangerous and environmentally harmful substances, which require abatement according to legal provisions. The production of photovoltaic cells therefore is subject to strict requirements for treatment of waste gases and wastewater. Solutions need to be easy and cost-effective. The contaminated wastewaters and waste gases should, under no circumstances, lower performance, endanger the health and safety of humans, or otherwise negatively affect the availability of production facilities. The safety of the production line must be guaranteed at every step and in every operating situation.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Premium

    Chemical Analyzing in Photovoltaics for the Solar Power Industry

    In the earlier days, the chemistry involved in solar cell manufacturing was relatively simple, using commodity chemicals. With cell efficiencies continuously on the rise and new cell concepts slowly being introduced with increased speed of processing, precise chemical concentration control is becoming crucial to obtain consistency and more cost-effective manufacturing of solar panels. This is possible by monitoring on-line the etching bath composition, a small but genuine step forward in your competitive advantage.

    Typical parameters: NaOH – Si – HF – HNO3

    By AppliTek NV based in Nazareth, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you