Steam Generators Articles

  • Reducing Costs of Steam Flow Measurement

    Traditionally, steam flow has been measured with a differential pressure device. This is typically an orifice plate. However, such devices are inherently volumetric flow measurements. As we have discussed in previous blog posts, changes in pressure and temperature ...


    By Sierra Instruments, Inc.

  • VIYELLATEX improves factory efficiency thanks to cogeneration with gas engines

    VIYELLATEX Limited is the composite knit apparel and textile manufacturing business unit of VIYELLATEX group. It started its operations in 1996. The company is comprised of design and product development, sample, knitting, washing, cutting, sewing and finishing sections. The Textile Testing Corporation (Testing Lab) is also a part of VIYELLATEX. It caters to major buyers such as Puma, S.Oliver, ...


    By Clarke Energy

  • Steam Turbine Rotor Transient Thermo-Structural Analysis and Lifetime Prediction

    Market requirements for faster and more frequent power unit start-up events result in a much faster deterioration of equipment, and a shorter equipment lifespan. Significant heat exchange occurs between steam and turbine rotors during the start-up process and even more intensive heat exchange takes place during the condensation phase in cold start-up mode, which leads to further thermal stresses ...


    By SoftInWay Inc.

  • Case study - Interest grows in OPEX saving UV water treatment technology used for enhanced oil recovery

    atg UV Technology, a UK manufacturer of water treatment packages for the Oil and Gas sector have seen growing interest in the application of UV disinfection for the treatment of sea water used for well injection in enhanced oil recovery applications. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable ...


    By atg UV Technology

  • South Coast Steam Power, Puerto Rico and QUA’s Fractional Electrodeionization

    Project Background Puerto Rico Electric Power Authority (PREPA) is the owner of South Coast Steam Power Plant located at Guayanilla in the island of Puerto Rico, about 150 KM south of San Juan. This power station is one of PREPA’s oldest units and uses an oil fired boiler as part of its generation process. The plant decided to replace an ...


    By QUA Group LLC

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Oman EOR project ahead of schedule; EIB tenders in Namibia; Lighter steam system cuts CAPEX

    Solar Thermal news you need to know. PDO, Glasspoint start to build Oman's giant Miraah plant Petroleum Development Oman (PDO) and GlassPoint Solar have broken ground on the 1 GW Miraah Enhanced Oil Recovery (EOR) project a month ahead of schedule, the companies said in a statement November 4. The solar thermal facility will produce steam at the Amal ...


    By FCBI Energy

  • Bubble, bubble … boiling on the double

    Original story at MIT  New analysis of textured surfaces could lead to more efficient, and less dangerous, power plants. The boiling of water is at the heart of many industrial processes, from the operation of electric power plants to chemical processing and desalination. But the ...

  • Boiler Film Forming Amines Hydrocarbon Engineering

    A good treatment programme for boiler feed water is crucial to the smooth operation of steam generators. Faulty treatment can cause damage to the plant, with attendant high costs. Traditional treatment programmes have three components: oxygen scavengers, alkalising amines, and phosphate. In a treatment programme based on film forming amines (FFAs), the functions of both oxygen scavenger and ...


    By Kurita

  • Turbine condensers for propylene production

    Propylene is one of the most important compounds in the chemical industry. It's primarily used to make the plastic polypropylene, but also in many other processes. A propylene factory in Ningbo, China set Körting Hannover AG an exceptional process-engineering challenge. It appointed the company to design special turbine condensers to produce 600,000 tonnes of propylene per year. The ...


    By Körting Hannover AG

  • Tronox Namakwa sands furnace Gas CHP Plant - Case Study

    Tronox is the largest fully integrated producer of titanium ore and titanium dioxide in the world. The Tronox Mineral Sands cogeneration power generation plant, located in the Western Cape, uses the waste gas from two open arc DC furnaces as an energy source. The gas engine power plant operates on waste gas ...


    By Clarke Energy

  • Business-as-unusual outlook for oil in the medium term

    There is a curious twist to the many messages emerging from the International Energy Agency (IEA) annual Medium-Term Oil Market Report (MTOMR) released today. On the one hand, says the Agency, it will be ...


    By GLOBE Foundation

  • StatoilHydro Kollsnes Norway, MPPE for removing toxic load of gas produced water case study

    MPPE for Removal of: Dispersed oil (aliphatics) Dissolved and dispersed aromatics (BTEX) Poly Aromatics (PAHs) Specifications: Flowrate 20 m3/hr Includes Steam Generator and RO unit >99% removal of BTEX, PAHs, Aliphatics (oil) Kollsness project ...

  • Biomass Briquettes: the Renewable Energy for the Tribals

    The tribals are actual owners of the land but post independence era and due to faulty land reforms they have lost a significant amount of land and the customary right to live in their own area. The renewable energy policy in India can give them a new leash of life. For years the tribals in India have dependent on the Nature for their living. It is well known fact that forest and natural ...


    By Jay Khodiyar Machine Tools

  • Pakistan SZS Gas Fired Steam Boiler

    Heavy Oil, Light Oil, Residual Oil, Natural Gas, City Gas, and Blast Furnace Gas can be used as Fuel. The boilers can also be applied to generate electricity at some districts where electricity power is in short. So are a variety of industrial productions, living and remote areas, and oil field. Even they can be used as a power plant boiler startup. SZS series oil & gas boilers are ...


  • RELAP5–3D transient modelling for NGNP integrated plant

    The High–Temperature Gas–cooled Reactor (HTGR) is designed with outlet temperatures ranging between 750°C and 800°C. These high outlet temperatures enhance the power production efficiency and facilitate a variety of industrial applications. The objective of this study is to understand the response of the primary system to potential transients in the secondary system. For this analysis, the ...


    By Inderscience Publishers

  • Exergy analysis of a syngas fuelled cogeneration cycle for combined production of power and refrigeration

    This communication presents a biomass fuelled cogeneration cycle for the combined production of power and refrigeration. The system is an integration of combined gas–steam cycle and absorption refrigeration cycle. A thermodynamic analysis through energy and exergy is employed, to investigate the effects of cycle pressure ratio, gas turbine inlet temperature and evaporator temperature on first–law ...


    By Inderscience Publishers

  • Scaletron - case study

    The Customer L A Maintenance is a leading building services maintenance contractor well known for its innovative approach. One of its functions is the maintenance of air-conditioning units for computer suites and other areas where controlled air quality is essential. The problem In order to ensure a controlled air quality the air conditioning units are ...

  • Synthesis and performance evaluation of novel alcohol ether carboxylate surfactants for alkali-surfactant-polymer flooding

    Novel surfactants alcohol polyoxypropylene polyoxyethylene ether carboxylates (APPEC) were successfully synthesised by carboxymethylation reaction of alcohol polyoxypropylene polyoxyethylene ether (APPE) to meet alkali-surfactant-polymer (ASP) flooding needs. The structure of APPEC was characterised by Fourier transform infrared (FTIR) spectrometry. The reaction conditions of APPEC including ...


    By Inderscience Publishers

  • RELAP5-3D modelling of heat transfer components (intermediate heat exchanger and helical-coil steam generator) for NGNP application

    The Next Generation Nuclear Plant project is aimed at the research and development of a helium-cooled high-temperature gas reactor that could generate both electricity and process heat for the production of hydrogen. The heat from the high-temperature primary loop must be transferred via an intermediate heat exchanger to a secondary loop. Using RELAP5-3D, a model was developed for two of the heat ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you