Only show results available in Virginia? Ok

Steam Turbines equipment for Energy and Renewables

  • Premium

    Hilliard HILCO - Model ST - Adsorbent Cartridges

    Selexsorb GT is a patented adsorbent specifically designed for use with Fyrquel gas turbine lube and hydraulic control fluids. These cartridges maintain the original quality of fluids for prolonged periods, reducing the need for fluid changeouts and increasing equipment life.

  • Dresser Rand Steam Turbine Blades

    Rotor Blade re-design within a challenging leadtime; In 2015, Maintenance Partners Belgium awarded Stork Turbo Blading for the supply of 7 stages steam turbine rotor blades.

    By remove based in Anytown, NETHERLANDS.

  • Wabash - Steam Turbine Generators

    Wabash provides a selection of steam turbine generator sets (both condensing and non-condensing) ranging from 5,000 KW to 50,000 KW manufactured.

    By Wabash Power Equipment Company based in Wheeling, ILLINOIS (USA). from Generators Product line

  • Model TG - Axial Extraction Condensing Turbines

    The design of extraction condensing TG turbines results from more than 100 years of experience in manufacturing PBS industrial turbines, featuring high efficiency and reliable operation. With minimum costs of operation, we guarantee a rapid return on the investment made. We offer turbines with one or two controlled extractions and one uncontrolled ...

    By PBS ENERGO, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Turbines- Steam Turbines Product line

  • Sentinel - Steam Turbine Floating Brush Seals

    The Inpro/Seal Sentinel FBS extends maintenance intervals to 3-4 years over conventional carbon rings which normally last 6-12 months. Designed as a drop-in replacement for existing carbon rings, the Sentinel FBS eliminates costly casing modifications and rotor removal for seal installation. The Sentinel FBS is comprised of densely packed and ...

    By INPRO-SEAL based in Rock Island, ILLINOIS (USA).

  • Model FT7 - Hygienic Turbine Flowmeters

    The Flowquip range of FT7 hygienic turbine flowmeters are specifically designed for the measurement of liquid flows in the food and pharmaceutical industries. They provide a highly accurate and economical means of measuring flows of clean liquids. FT7 hygienic turbine flowmeters have been designed for the dairy, beverage, food processing and ...

    By Flowquip Limited based in Sowerby Bridge, UNITED KINGDOM.

  • Steam Turbines

    A steam turbine is a device that converts the heat energy in captured, pressurized steam, and converts it to mechanical energy. A steam turbine generator works by heating water to extremely high temperatures until it is converted into steam, then the steam energy is used to rotate the blades of a turbine to create mechanical or rotational energy. ...

    By Tuba Turbine GmbH based in Frankfurt am Main, GERMANY.

  • Steam Turbine Systems

    Examples of Steam Turbine systems we test, commission, optimize, service and operate.

    By EGYPTROL based in Nasr City, EGYPT. from Commissioning Product line

  • Mineral and Synthetic Oil Mist Eliminators

    Our Oil mist eliminator are build and installed mainly in this fields: Gas turbines, compressors, steam turbines, gearboxes, diesel engines.

    By Filters s.r.l. based in Scalenghe, ITALY. from Packages Product line

  • Model DTP & DTP-SS - Discrete Tortuous Path Valve

    ABV Energy supplies complete de-superheated Systems for Turbine Bypass lines, formed by DTP SS CONTROL VALVE used to control pressure reducing and SPRAY WATER CONTROL VALVE having the function to de-superheat the steam.

    By Velan ABV S.p.A. based in Capannori (LU), ITALY. from Control Valves Product line

  • Elliott - Model YR - Steam Turbines

    Elliott YR steam turbines are globally renowned for performance in a wide range of services.They are known for quality, reliability, and adaptability, operating for decades in conditions ranging from humid tropical heat and rainfall to freezing icy tundra and snowfall. Around the world, YR turbines are on the job driving pumps, compressors, fans, ...

    By Elliott Group based in Jeannette, PENNSYLVANIA (USA). from Steam Turbines Product line

  • Elliott - High-Speed Multi-Valve Steam Turbine

    Elliott's high-speed, high-efficiency multi-valve steam turbine combines the reliability of an impulse style turbine with the efficiency of a reaction style turbine to provide outstanding performance in a range of refinery services. Designed to API 612 standards, the turbine has a small footprint but packs a powerful punch, offering a ...

    By Elliott Group based in Jeannette, PENNSYLVANIA (USA). from Steam Turbines Product line

  • Model SRCF 30 MW - 150 MW - Steam Turbines

    Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. ...

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Arabelle Steam Turbines For Nuclear Power Plants

    The GE nuclear power conversion solutions for large and very large reactors are based on our Arabelle steam turbine technology platform. Arabelle steam turbines deliver power from 700MW to 1,900MW in both 50 and 60 Hz cycles and can be adapted to any heat sink conditions with a choice of low pressure modules and types of last-stage blades. From ...

    By GE Power & Water based in Schenectady, NEW YORK (USA). from Steam Turbines Product line

  • Skinner - Model SK25 - Steam Turbine

    In turbine applications where rugged and dependable performance is critical to your operation, the wise choice is a Skinner SK25 Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for their unique operations within an ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model S23 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner S23 Single-Stage Steam Turbine. Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for their ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model S28 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner S28 Single-Stage Steam Turbine.  Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Skinner - Model SB18 - Steam Turbine

    In turbine applications where rugged and dependable performance with low capital investment is critical to your operation, the wise choice is a Skinner SB18 Single-Stage Steam Turbine.  Over the years customers have designated Skinner as the driver of choice for their rotating equipment.  As a result, they obtained power solutions for ...

    By Skinner Power Systems based in Erie, PENNSYLVANIA (USA). from Steam Turbine Product line

  • Ware - Turbines

    With a rich heritage in steam that goes back to 1952, WARE represents single-stage, steam turbines of proven design for mechanical drive and electric power generation for petrochemical, marine and other industrial services. Over 20,000 turbines have been installed providing many years of operating experience driving pumps, fans, blowers, ...

    By Ware, Inc. based in Louisville, KENTUCKY (USA).

  • Siemens - Model SST-9000 - Steam Turbine

    Steam turbines of the SST-9000 series are typically operated in power plants with a power output of up to 1,900 MW. They feature a double flow high-pressure (S) cylinder and up to 3 double flow low-pressure (L) cylinders with shrunk on disk rotors for 25 and 30 Hz.

    By Siemens Power Generation based in Erlangen, GERMANY. from Steam Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you