Only show results available in Virginia? Ok

Waste Incineration Applications

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Applications and Air Pollutants Removed for Wastewater Treatment Operations

    For industrial and municipal treatment plants; Chemical scrubbers, biological towers and adsorption systems to remove hydrogen sulfide, mercaptans, other organic sulfur compounds and ammonia from digesters, pump stations, ponds, grit and screening works, sludge filter presses and dryers. Special Wet Electrostatic Precipitator for sewage sludge incinerators. Stripping ammonia and other volatile compounds. Decarbonization removal of carbon dioxide from wastewater.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Recycling equipment for waste-to-energy recycling

    Granutech has products that are well suited to process materials with the ultimate goal of producing energy from waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Shredders and crushers for special waste recycling

    Stopping the spread of hazardous waste! Ever-increasing consumption across Europe, coupled with rising prosperity among the populations of the typical emerging economy are causing a sharp upturn in the volume of waste worldwide. The shredding and sorting of rubbish and refuse is one of the key challenges within the waste management cycle. And with ERDWICH shredding machinery and plant, there is a perfect set of solutions for meeting any of these challenges in special waste applications.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Reliable Shredding Technology for Rubber and Tyres

    Our shredding systems generate granulate from the hardest rubber and old tyre applications for your recycling plant. Regardless of whether you want to use the granulate for pyrolysis, hydrolysis or combustion, we will customize it to exactly fit your needs. Regardless of whether rubber accumulates in the form of tyres, conveyor belts, rubberised chains or as production waste, recycling is economically efficient and makes sense from an environmental perspective. Very powerful shredders are required to recover recyclable materials from rubber waste and old tyres. Our proven and reliable 4-shaft technology is particularly suited in this regard. This system economically performs the pre- and re-shredding in just one step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Continuous emissions monitoring in waste incineration plants

    Waste-to-energy through incineration of waste is an effective way of producing electricity and heat, at the same time getting rid of the possibly hazardous or unrecyclable waste. The waste can be incinerated at specific WtE plants or at plants with permission for co-incineration of waste at biomass boilers or cement kilns. The waste incineration plants are, however, governed by strict emissions regulations.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Processing of Alternative Fuels for the energy industry

    RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Waste air combustion for municipalities

    By AEREON based in Austin, TEXAS (USA).

  • Premium

    Pulp and paper mill waste

    SSI offers a variety of low-speed, high-torque shredding solutions for pulp and paper mill materials processing to increase mill efficiency. SSI designs and manufactures a variety of high-capacity shredding solutions specially suited for paper shredding and pulp mill materials processing. With SSI’s low-speed, high-torque technologies, pulp and paper mills are able to increase overall mill efficiency by reducing waste volume and lowering fuel, storage and transportation/disposal costs. SSI custom engineers the most effective size reduction solutions specific to the application.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Tire shredding

    SSI offers a  variety of shredding solutions to process tires for cars, trucks, aircraft and agricultural to off-the-road (OTR) and mining equipment. SSI has many years and a great deal of experience in the supply of tire recycling machinery. We offer a broad range of sizes of tire shredders and have a world-wide installation base. Whether you’re just starting a tire recycling business, or you need to shred millions of tires each year, we have a system to meet your goals. We specialize in the supply of primary and secondary tire recycling systems, with options that can process any tire size made today, that can reduce whole tires to any size ½” (12mm) or larger. We do not offer “crumb rubber” production systems.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Hazardous and Medical Waste shredder

    HARDEN designs and manufactures shredders and size reduction systems for safe disposal of hazardous, medical and pharmaceutical waste. HARDEN has extensive experience in the supply of purpose engineered reduction, fuel blending and destruction systems for the hazardous and medical waste processing industries.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Recycling of Incinerator Slag

    Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    organic waste Applications

    Emissions of waste in life more and more, including waste, medical waste, industrial waste, eat hutch garbage, but the content is more of living garbage, about 60%. In order to achieve reduction, innocuity and recycling of living garbage disposal method is landfill, incineration, the early stage of the process chain is the breakage reduced size first, then on to the next step processing, this would require the use of garbage crusher is suitable for the living garbage.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Balers and compactor solutions for public sector industry

    The public sector comprises a broad range of services and institutions that supports our safety and well being. All these require fast and efficient waste handling.

    By Bramidan Balers based in Bramming, DENMARK.

  • Premium

    Industrial wastewater solutions for contaminated landfill leachate

    Reliable treatment. Optimised for heavily contaminated landfill leachate. Whether it be household rubbish, construction rubble, contaminated soils, port sludge or waste incineration ash, final storage of these heavily contaminated materials poses a potential groundwater pollution risk from heavy metals, nitrogen bonds or organic substances. Landfill leachate resulting from precipitation on landfill sites.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Emissions monitoring for waste incineration

    Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate.

    By Opsis AB based in Furulund, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you