incinerator supplier Articles

  • OMNNI Report of Asphalt Mix Design and Testing

    This report presents the results of asphalt mix design and testing using glass aggregate produced by Minergy. Glass aggregate from the MinergyWinneconne Pilot Plant produced from sediments dredged from the Fox River was used in the design and testing. Two sizes of glass aggregates were used in the asphalt mix designs. One size has a gradation that is naturally produced by the plant during the ...


    By Minergy Corporation Limited

  • Case study - Perstorp Speciality Chemicals AB,Perstorp, Sweden

    Customer: Perstorp Speciality Chemicals AB,Perstorp, Sweden Project: Chemical Waste Incinerator operating WESP Perstorp AB started up their Chemical Waste Incinerator year 2007. The emission standard to meet stated < 5 mg/Nm3. With a standard as low as 5 mg the natural choice ended up in a WESP. Result The plant has operated ...


    By Envibat AB

  • Consensus building and knowledge integration methods applied to technology implementation in the Swiss waste incineration industry

    This paper describes the use of consensus-building and knowledge integration methods to reflect stakeholders' preferences. These methods were applied in a complex decision making process concerned with the implementation of innovative technologies in Swiss waste incineration plants. We described stakeholders' preferences by integrating their knowledge into a multi-criteria evaluation of ...


    By Inderscience Publishers

  • Another insight into the Global Leader in Incineration

    Delivering close to 15 years of demonstrated incineration solutions across the world, Inciner8 represents an inflammatory success that continues to establish itself within new markets. The development of Inciner8 began during 2004 when the companfs Founder and present day ...


    By Inciner8 Limited

  • Horizontal Mixers for Secondary Combustibles - Case Study

    The manufacture of secondary combustibles from household waste, industrial waste and special waste in accordance with statutory requirements is to be a huge challenge for system suppliers in the coming years. Currently, at times, extremely differing substances are treated in such a way that they can be loaded into conventional furnaces. The most important requirement is the detailed control over ...


    By AVA GmbH u. Co. KG

  • Incineration used in fight against HIV in Zimbabwe

    The prevention of HIV in the poorest regions of Africa has been an ongoing issue for decades and the United Nations has always been at the forefront of providing solutions to the most common problems such as 1) how to prevent ...


    By Inciner8 Limited

  • Rotary Kiln Incineration Plant - Case Study

    The R1200 plant was installed in the early 00’s in Macau. The fully integrated system boasts a burn rate if 1200kg per hour and accepts a variety of different waste streams that include, clinical waste, pharmaceutical waste, liquid waste that includes solvents, waste oil, shredded tyres and well as some livestock as large as horses. The rotary kilns incineration principle is defined by one ...

  • Reducing Waste Management Costs

    Incineration is a viable alternative to Landfill. Business costs seem to be increasing all the time and waste disposal can be very expensive. There has been a dramatic rise in the cost of waste disposal in recent years with landfill costs in the UK reaching ...


    By Inciner8 Limited

  • In case of emergency … call Matthews - Case Study

    How as the world’s leading incinerator suppliers we raced to the rescue We don’t normally see ourselves as one of the emergency services, but just a couple of weeks ago that is precisely the role we found ourselves in.  One of our customers, Kings Hill Cremations, based in Nuneaton, Warwickshire, England, suffered a devastating fire that prevented them from carrying on ...

  • Case study - Catalytic oxidizer catalyst replacement

    Overview A New Jersey pharmaceutical company purchased a thermal incinerator to treat the heptane and hexane exhaust from their capsule wash system. The thermal incinerator"s "tubular" design was modified with a catalyst bed in order to reduce the system"s operational costs. Unfortunately, when operating in the catalytic mode, the oxidizer failed to provide the required ...

  • High-quality separation technology in urban mining for Brantner Environment Group - Case Study

    Hidden treasure, zero waste An enhanced separation system for a cutting-edge recycling plant The Brantner Environment Group GmbH is a waste management company headquartered in Austria and operating in Central and Eastern Europe. It runs the first plant in Europe to use a special process in order to improve the results of the recycling process by maximizing the ...

  • Polaris 1800 – extension of the successful series - Case Study

    SRF shredding in one go – with only one machine: the market launch of the Polaris at IFAT 2016 triggered a boom in demand for Lindner's innovative, highly specialized shredder. The new Polaris 1800 model has been introduced recently. The Polaris was developed for the one-step production of medium-calorific solid recovered fuel (SRF) ...


    By Lindner-Recyclingtech GmbH

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Bottle deposit scheme plans unveiled

    The UK government yesterday announced plans for a deposit return scheme for single-use drink containers in a bid to improve Britain’s floundering recycling rates. The scheme will be subject to a consultation later this year, and will look to emulate similar initiatives in Denmark, Sweden and Germany where recycling rates have risen up to 97%. ...

  • Zuser - Polaris 2800 - With Lindner, you know what you’re getting - Case Study

    Zuser Ressourcenmanagement GmbH is not keen on experiments: for the past 24 years the RDF producer in Peggau, Austria has bought shredders made by Lindner Recyclingtech. The new addition to the family is a Polaris 2800. For one-step shredding every other machine was simply out of the question. The cooperation with Lindner dates back to a time before Mag. Georg Zuser became CEO of the Zuser ...


    By Lindner-Recyclingtech GmbH

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • CEMS: An Overview

    We've written an overview to where CEMS are required, types of site that require CEMS and future requirements. Continuous Emissions Monitoring Systems are used to continuously collect, record and report data from industrial process operators that produce emissions to air. CEMS are used as a means to comply with ...


    By a1-cbiss

  • Sustainability Trends from NAEM: Zero Waste, Water Efficiency, and More

    Sustainability conferences give attendees a valuable opportunity to learn about industry trends directly from the companies that are leading the way! It’s safe to say that attendees learned a lot last week in Milwaukee, Wisconsin at the 2016 NAEM Sustainability Management ...


    By Intelex Technologies Inc.

  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you