Only show results available in Virginia? Ok

Wind Energy Applications

  • Meteo Information for Safe Operation

    In the industry segment meteo information is essential for safe operation. To deal with emergencies, accurate real-time information on wind conditions (direction and speed) is crucial. In some cases we feed this data directly into safety applications which models and predicts the progression of released gas clouds.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Noise and vibration pollution control for wind power industry

    As a major source of renewable energy, wind turbines are continuing to experience exponential growth, with a production capacity that is doubling every three years. Reliability and the optimisation of maintenance have become major economic challenges for wind turbine operators.

    By ACOEM based in Limonest, FRANCE.

  • Products for Grower Weather Station

    Situation: Television news reports and regional forecasts have their role and are important sources of information for managing your operation. But what about your local conditions?

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Products for Airport Weather Station

    Situation: Do you use a small airport, private landing strip, or small municipal runway? If you’re lucky, you might have a windsock. That’s okay if you’re on site, but inadequate if your flying in.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm’s relationship with the community and with the local regulatory organizations. 

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Ambient Continuous Metals Monitoring/ Fence Line Monitoring/ Source Identification

    The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification instrument in the industry.

    By Cooper Environmental based in Beaverton, OREGON (USA).

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage. Bird-X products are humane, environmentally preferred, poison and trap free, and sold in over 160 countries. The unique line cover both small and large spaces, indoor and out, and include electronic repellers, lasers, and physical barriers.

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Premium

    Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries

    From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing line emissions. Removal of fine metallic particulate including tars from smelters and sinter plants as well as particulate emissions from blast, reverberatory and other furnaces. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Sound Instrumentation for Environmental Noise Monitoring

    State of the art noise monitoring systems; Modern noise monitoring systems offer a wide range of advanced features and come with software that can analyze and structure long term measurements data efficiently.  A complete noise monitoring system consists of one or more noise monitoring terminals, a noise server and work stations for presentation, post processing and reporting.

    By Norsonic AS based in Lierskogen, NORWAY.

  • On-demand property and casualty weather solutions for insurance sector

    Weather Analytics provides on-demand property and casualty weather solutions. Weather Analytics is a breakthrough provider of solution-ready climate data for the property and casualty insurance sector. We deliver hard-to-find historical and predictive weather solutions with 33 years of geo-stable weather data. Accurate, on-demand, localized climate and weather data can reduce the time spent on finding and processing this data while improving accuracy in assessing potential weather impacts on your coverage areas for property and casualty insurance.

    By Weather Analytics based in Bethesda, MARYLAND (USA).

  • Wind Monitoring for Bridges and Sluices

    In many cases reliable measurement of wind speed is a must requirement for the safe operation of bridges and sluices. Mierij Meteo has supplied numerous wind sensors ensuring safe operation whatever the season. For reliable measurement of wind speed, wind direction and temperature we recommend: Anemometer and Wind Vane MW 21 / Anemometer and Wind Vane MW 11 & MW 12 / Temperature meters MT 32 or  MT 42

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust enough for harsh and cold climates. Ammonit offers standard heating systems as well as individual heating solutions, which combine several power sources suitable for the site.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Biral - Bristol Industrial & Research Associates Ltd based in Portishead, UNITED KINGDOM.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Premium

    Sound Instrumentation for Vibration

    Vibration is simply defined as the variation of an object about a fixed position. To properly define and quantify the physical characteristics of vibration, however, is much more complex - account must be taken of the direction, frequency and magnitude of vibration. Then, what properties should be measured? Is it appropriate to measure the displacement of the vibrating object as a measure of its amplitude, or should we instead measure velocity, or acceleration? What are the conventions for measuring direction, and is it really important?

    By Norsonic AS based in Lierskogen, NORWAY.

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site work).

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you