Only show results available in Virginia? Ok

Wind Monitoring Applications

  • Premium

    Industrial wastewater solutions for vibratory grinding wastewater

    Using innovative recycling technologies in vibratory grinding processes. Rinse water from vibratory grinding processes ca be contaminated with heavy metals, oils and, depending on the process, even a variety of chemicals. It cannot be discharged into the public sewer system, and usually requires to be disposed of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial wastewater. It conditions the vibratory grinding wastewater in such a way that it can be reused in the process.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Meteorological Sensors for Wind Turbine Control Industy

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their standard equipment. We have different ultrasonic wind sensors with open protocols / interfaces, which allows an easy exchange of old mechanical wind sensors trough state-of-the-art ultrasonic anemometers on your wind turbine.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Meteorological Sensors for Hydro-Meteorology Industry

    Climate change makes for more extreme weather. The main reasons for this are wind and precipitation.That is why an increasing number of meteorological and hydrological monitoring networks are coming together. Global coverage with hydro-meteorological measuring technology is varied. Very old and very modern (new) measuring networks are used for climate monitoring worldwide. And there are still large gaps, for example on the oceans.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Wind monitoring for the offshore wind energy

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Water Data Management Solution for Alpine Monitoring

    KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in catchments.

    By KISTERS AG based in Aachen, GERMANY.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Meteo Information for Safe Operation

    In the industry segment meteo information is essential for safe operation. To deal with emergencies, accurate real-time information on wind conditions (direction and speed) is crucial. In some cases we feed this data directly into safety applications which models and predicts the progression of released gas clouds.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Products for Airport Weather Station

    Situation: Do you use a small airport, private landing strip, or small municipal runway? If you’re lucky, you might have a windsock. That’s okay if you’re on site, but inadequate if your flying in.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm’s relationship with the community and with the local regulatory organizations. 

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust enough for harsh and cold climates. Ammonit offers standard heating systems as well as individual heating solutions, which combine several power sources suitable for the site.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Weather Monitoring Systems for calibration and test fixtures

    Climatronics remains committed to the needs of our customers and the requirements of the regulatory compliance markets that we serve. We offer a full compliment of test equipment to support field audits and calibration of our sensors and systems. Additionally we maintain a calibrated wind tunnel at our headquarters and offer documented NIST-traceable calibrations on most of our sensors. We have a fully developed and approved quality assurance program which insures the validity and integrity of our calibration procedures.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Wind Monitoring for Bridges and Sluices

    In many cases reliable measurement of wind speed is a must requirement for the safe operation of bridges and sluices. Mierij Meteo has supplied numerous wind sensors ensuring safe operation whatever the season. For reliable measurement of wind speed, wind direction and temperature we recommend: Anemometer and Wind Vane MW 21 / Anemometer and Wind Vane MW 11 & MW 12 / Temperature meters MT 32 or  MT 42

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Products in Meteorological Weather Station

    Situation: Weather is a fascinating, moving thing that everyone experiences. For most people, weather reports are for the TV news, but taking ones own measurements is far more interesting.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • On-demand property and casualty weather solutions for insurance sector

    Weather Analytics provides on-demand property and casualty weather solutions. Weather Analytics is a breakthrough provider of solution-ready climate data for the property and casualty insurance sector. We deliver hard-to-find historical and predictive weather solutions with 33 years of geo-stable weather data. Accurate, on-demand, localized climate and weather data can reduce the time spent on finding and processing this data while improving accuracy in assessing potential weather impacts on your coverage areas for property and casualty insurance.

    By Weather Analytics based in Bethesda, MARYLAND (USA).

  • Wind flow measurement

    The design of buildings and structures located both on land and in the sea must be optimised to withstand interaction with wind and wave forces. Typical applications are flows measurement around tall buildings, bridges and offshore oil rigs.

    By Dantec Dynamics based in Skovlunde, DENMARK.

  • Ammonit Wind Farm Monitoring Systems (SCADA)

    Once the wind farm is set up and running, its best performance has to be ensured. To do so, it is essential to monitor and check its operation. Meteo-40 can easily be integrated in SCADA (Supervisory Control and Data Acquisition) systems to provide reliable comparative meteorological data. Considering the measurement data recorded by Meteo-40, for example, predictions about the annual energy production of the wind farm can be verified. Meteo-40 records measurement data, which is used by wind farm operators and investors, as well as for forecasting reasons. With its configurable Modbus Register Map Meteo-40 is designed for operation in most existing SCADA systems. The necessary parameters are configured via the user-friendly Meteo-40 web interface.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines. With our MET masts you will get the most reliable data to help make your investment in renewable energy become more profitable.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Industrial solutions for air quality monitoring

    To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our customers.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you