Wind Turbine Blades Downloads

  • NPS - Model 100C-24 Class III/A - Next Generation High Output Wind Turbine - Brochure

    Introducing the NPS 100C, the next generation of our industry leading permanent magnet/ direct drive distributed wind turbines. » A new 24-meter rotor features state-of-the-art hub and blade technology with superior aerodynamics providing a larger swept area. This increases the annual energy production (AEP) of the NPS 100C-24 by 11% over the previous ...


    By Northern Power Systems

  • AERO - Wind Turbines Brochure

    Not including regulator controller. The AERO350W AERO400W are special marine environments. The AERO400W with 5 blades is the quietest ...


    By Eshia S.L.

  • Model CF15 - Radial Generator Wind Turbine Brochure

    The CF15 is a 15kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model CF 25 - Radial Generator Wind Turbine Brochure

    The CF25 is a 25kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model CF 19.5 - Radial Generator Wind Turbine Brochure

    The CF19.5 is a 19.5kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model CF 50- 25 - Radial Generator Wind Turbine- Brochure

    The CF50 is a 50kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model CF 60 - Radial Generator Wind Turbine Brochure

    The CF60 is a 60kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model CF 12 - Radial Generator Wind Turbine Brochure

    The CF12 is a 12kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model CF 50-20 - Radial Generator Wind Turbine Brochure

    The CF50 is a 50kWradial generatorwind turbine with active blade pitch and an active yaw. The radial generator offers better power performance and an increased AEP on our competitors.  TheRadial generatorhas a high magnetic flux. The magnets have multiple coatings and are sealed in a glass fibre/epoxy coating. This means that a magnet can never be dislodged and corrosion is practically ...


    By C & F Green Energy Ltd

  • Model Qr6 - Vertical Axis Wind Turbines Brochure

    Qr6 rotor can use wind from all directions, unlike traditional HAWTs which need to track the wind – therefore maximising efficiency. A VAWT for the same swept area has a smaller plan area than a HAWT, making it more space efficient. An important consideration when siting on or close to buildings. The helical swept blades help distribute loads evenly, resulting in minimal vibration making ...


    By VWT Power Ltd

  • Model FX Series - Wind Turbine Generator - Brochure

    The ESPE FX range is the 50, 60, 75, 100 kW wind turbine generator family capable of starting up when the wind speed reaches 2.8 m/s. Once the wind speed reaches 9.5 m/s the blade is at its rated power which, thanks to an aerospace type conceptual design, it will maintain until a speed of 25 m/s, the wind speed over which the WTG will go into safety conditions in just 5 seconds. All of this takes ...


    By ESPE Group

  • Q-800 - Portable Shearography System Brochure

    NDT INSPECTION ON COMPOSITES WITH SHEAROGRAPHYDigital Shearography NDT System Q-800Applications• A Non-Destructive Testing method for a large variety of different composite materials• Reinforced plastics, laminates, honeycomb, foam, wood, metal, glare etc.• Approved in the aerospace, automotive, wind turbine and other industriesFeatures• A certified NDT method, ASNT, EN 4179, NAS 410 and ASME• ...


    By Dantec Dynamics

  • Model V105-3.3/3.45 MW - Wind Turbines Brochure

    With a rotor size of 105 m, the V105-3.3/3.45 MW™ IEC IA/IEC S is the turbine that fits the most severe wind conditions. It has an extremely robust design for tough site conditions and is especially suited for markets with tip-height restrictions and high grid requirements. The V105-3.3/3.45 MW™ blade is a shortened version of the proven and tested pre-preg blade used on the V112-3.0 ...


    By Vestas Wind Systems A/S

  • Rotor Blades Brochure

    The rotor blades have a computer-designed, aerodynamic profile and are manufactured by the hand lay-up method. The mix of glass fibre-carbon fibre laminate guarantees the highest quality standard at a reasonable price. A special tape is fixed to the leading edge to guarantee optimum edge protection. By using the same moulds for each different diameter, the blades are reproduced identically and ...


    By BRAUN Windturbinen GmbH

  • Model WTN 500 - 500KW Wind Turbine Brochure

    The wind turbine WTN 500 is a pitch-controlled turbine with complete variable speed for operation parallel to the public grid. The rated output of the plant is 500 kilowatt; the rotor diameter is 48 meters. The rotor has three blades and is arranged in upwind position of the tower. Yawing into the wind is achieved by two electrically driven yaw systems. You can choose between a 50m tubular and a ...


    By Wind Technik Nord GmbH

  • Forgen - Ventus 30 - Vertical Axis Wind Turbine Brochure

    W W W . A D A T U M . C O M 5432 Any Street West, Townsville, State 54321 Tel 555.543.5432 Fax 555.543.5433 www.forgenrenewables.com Forgen® Ventus 30 Technical Data The Forgen Ventus 30 vertical axis wind driven generator embodies long established, high efficiency generator principles, combined with turbine airflow expertise. Low inertia of the carefully balanced all aluminum ...


    By Forgen Renewables

  • Forgen - Ventus 70 - Vertical Axis Wind Turbine Brochure

    W W W . A D A T U M . C O M Forgen® Ventus 70 Technical Data The Forgen® Ventus 70 vertical axis wind driven generator embodies long established, high efficiency generator principles, combined with turbine airflow expertise. Low inertia of the carefully balanced all aluminum rotor assembly enables maximum advantage to be taken of average weather conditions. The Forgen® Ventus 70 comes complete ...


    By Forgen Renewables

  • BWC Excel 10 - 10 kW Wind Turbine - Spec Sheet

    The wise choice for Performance, Reliability, and RuggednessThe Bergey Excel 10 is ideal for homes, farms, and small businesses. Its extra large rotor and low cut-in wind speed give it exceptional performance, out producing all other turbines in its class. More energy means greater savings and a quicker payback.The Wise Choice30 years ago, Bergey pioneered the radically-simple “three moving parts ...


    By Bergey Wind Power Co.

  • Wind Turbines S82-1.5 MW - Brochure

    S82 - 1.5 MW is designed for generating the optimal power output even at sites with a modest wind speed regime. The wind turbine concept is based on robust design with pitch regulated blade operation, a 3-stage gearbox with 1,650 kW rating and flexible coupling to the asynchronous induction generator. The Suzlon Flexi-slip System provides efficient control of the load and power control. The ...


    By Suzlon Energy Limited

  • Kaplan - Hydro Turbines - Brochure

    RPW/BPROS/VRTKPL12/eng/HYD/03.12/FR/7565 © - ALSTOM 2012. ALSTOM, the ALSTOM logo and any alternative version thereof are trademarks and service marks of ALSTOM. The other names mentioned, registered or not, are the property of their respective companies. The technical and other data contained in this document is provided for information only. ALSTOM reserves the right to revise or change this ...


    By Alstom

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you