Environmental Management Applications

1058 Results found
Only show results in Virginia?
OK
  • Category: Environmental Management ×

Investment services for metals & mining industry

by McHewel Investment Group     based in Toronto, ONTARIO (CANADA)

Part of McHewel’s Basic Materials Practice, Metals & Mining is a global consultant and research group serving clients in steel, nonferrous metals, and mining industries around the world. We help clients—from small and large companies to niche players and commodity producers—to discover the answers that matter through the entire value chain from mining through distribution. With approximately 350 experienced practitioners worldwide, we can provide responsive and relevant service.

Erosion & sediment control solutions for costal/beach region

by Erosion Control Forum     based in Bend, OREGON (USA)

Coastal erosion is the wearing away of land or the removal of beach or dune sediments by wave action, tidal currents, wave currents, or drainage. Removing sand and other materials from beaches and dunes due to tidal storm surges and construction purposes causes massive beach erosion damages and land loss of seashores, thus destroying the natural heritage of the coast and reducing the vibrancy of the tourism industry. Uprooting vegetation from coastal areas destabilises beaches and clearing sites inland results in increased soil and dirt particles being washed offshore and smothering coral reef systems.

Stack Testing for Cement Kilns

by AirSource Technologies, Inc.     based in Shawnee, KANSAS (USA)

CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

Soil Stabilization

by Geo Products, L.L.C. - EnviroGrid Cellular Confinement (Geocell)     based in Houston, TEXAS (USA)

Problem: Poor load-bearing soils pose a significant problem for transportation and construction needs. Unpaved areas, such as access roads, paths, parking lots, driveways, etc can be highly vulnerable to near-surface shear failure and rutting, especially in moist conditions or areas with higher expected loads. Typically, engineers bridge over weak soils with rigid structures such as thick, reinforced concrete for roads and highways. However, such techniques are prohibitively expensive and inordinately difficult to install. The poorer the quality of the sub-base and the heavier the expected loads, the greater the amount and better the quality of support required.

Noise and vibration monitoring for nuclear power industry

by ACOEM     based in Limonest, FRANCE

The nuclear industry must increase the availability and reliability of its power stations whilst ensuring that a high level of safety is maintained. The principal weak points in achieving this objective are the industry`s systems and components.

Gas detection analyzers for chemical & pharmaceutical processes

by Control Instruments Corporation     based in Fairfield, NEW JERSEY (USA)

Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. Our various lines of hazardous gas monitoring systems benefit the chemical and pharmaceutical industry in the following applications.

Air monitoring equipments for soil contamination monitoring

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

Previous land uses or accidental spills can result in Volatile Organic Compound (VOC) contamination of soils. Volatile and semi-volatile compounds can then permeate through the soil and may persist for several years. This contamination can be traced and measured using our Soil Probes in conjunction with our VOC sorbent tubes. Soil probes are also useful in checking the effectiveness of remediation actions. This monitoring technique provides a cost-effective identification of hazardous gases.

NDIR Carbon Dioxide (CO2) Monitoring

by LED Microsensor NT     based in Saint-Petersburg, RUSSIA

Carbon dioxide has a wide range of commercial uses, from the production of lasers to the carbonation of soft drinks. This gas has become a topic of interest because it is classified among the greenhouse gases, gases which impact the Earth's environment when they reach high concentrations in the atmosphere. We propose solutions for medical diagnostics (out-breath control) and for ecological monitoring (control of carbon dioxide, exhaust gases in the atmosphere).

Noise Monitoring for Industry

by Cirrus Environmental     based in Peterborough, UNITED KINGDOM

For Industrial Noise Monitoring applications, Cirrus Environmental can supply a range portable, semi-permanent or permanent noise monitors as well as the MK:427 NoiseSensor for integration into existing data logging systems.

Thermal Remediation Inside & Near Buildings & Infrastructure

by TerraTherm, Inc.     based in Gardner, MASSACHUSETTS (USA)

In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other infrastructure.

Data analysis and visualization tools for groundwater and solute transport

by C Tech Development Corporation     based in Henderson, NEVADA (USA)

Groundwater and Solute Transport modeling is a sub discipline of environmental sciences with unique needs. Modeling has long utilized 3D simulations, but the ability to visualize and animate the results has lagged far behind the simulation technology. EVS-PRO, MVS, and EnterVol offer professional level presentation tools worthy of the current state-of-the-art in modeling. Visualization of groundwater and solute transport modeling results can be performed with all versions of C Tech’s software except for EVS for ArcView. EVS-Pro, MVS, and EnterVol are particularly well suited for animation and visualization of earth science modeling results from third party modeling systems such as USGS MODFLOW, MT3D, GMS©, Groundwater Vistas© and Visual MODFLOW©. Both combine animation capabilities with a powerful suite of visualization tools in a fully customizable environment.

Vacuum excavation solutions for diamond saw slurry

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any residue. Contractors perform this application frequently for airport runways and highway repair, as well as new construction.

Moisture Monitoring for Instrument Air & Compressor Systems

by Moisture Control & Measurement Ltd     based in Wetherby, UNITED KINGDOM

The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar problems.

ENMAT Energy For Android -

by ENMAT Monitoring and Targeting - Envantage Ltd     based in Manchester, UNITED KINGDOM

For more information oplease visit the Google Play Store: https://play.google.com/store/apps/details?id=com.appsbar.ENMATEnergy415754&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5hcHBzYmFyLkVOTUFURW5lcmd5NDE1NzU0Il0. Description Please Contact ENMAT on 0161 448 7722 for registration information. Free for business users with Half Hourly Metering. ENMAT provides affordable Energy Monitoring & Targeting software that helps companies to monitor and reduce Carbon Emissions. Our software can be used to set the targets you want to achieve at an affordable price. ENMAT Energy is for business use only.

Ground Penetrating Radars (GPR) for Forensics and Military

by Transient Technologies LLC     based in Kyiv, UKRAINE

Police can use GPRs in different forensic investigations (search for hidden burials, underground hiding places and passages etc.).  Military uses of GPR include location and detection of buried explosive devices and land mines.

Lime and Limestone solutions for remediation of soils, industrial sludge and animal waste

by Carmeuse Lime     based in Pittsburgh, PENNSYLVANIA (USA)

Lime treatment has several beneficial effects on soils and industrial sludge wastes that in turn provide benefits to other commercial sectors such as agriculture, landfill operations and land development.

Environmental technology for chemical industry

by Körting Hannover AG     based in Hannover, GERMANY

For the generation of vacuum in chemical process, Körting supplies tailor-made solutions to meet the complex requirements in chemical engineering: suction pressure ranging down to 0.01 mbar, suction flows down to 0.5 kg/h. The Körting technology including service and advice are essential components for plant stability and safe operation.

Water Data Management Solution for Lake / Reservoir Management

by KISTERS group     based in Aachen, GERMANY

Whether it’s for hydro electric production, irrigation operations, or long term ecosystem monitoring, utilize KISTERS solutions to monitor lakes and reservoirs.

AMR Systems

by CONTOR GROUP S.A.     based in Arad, ROMANIA

Contor Group provides the customers a reliable full-package AMR technology: » the meters endorsed with radio modules » portable receivers and data concentrators » GPRS/GSM communication equipments » specific software applications. Some benefits AMR technology brings: » open communication protocol wMBUS acc. to EN 13757-4 » equipments interoperability regardless of the device manufacturer » licence-free ISM band » tamper attempts or unauthorized access detection » back-flows detection and compensation hence the meter index and reading are identical » the mechanical blockage are evidenced » compliance with the standards: EN 300 220, EN 300 328, EN 301 489

Need help finding the right suppliers?

Let the XPRTs do the work for you