Archaeology Equipment For Environmental Management Available In Connecticut
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
With our soil sampling kit, you always have an easy and cost-effective tool available to collect soil samples from soft to medium dense soils. Gouda Geo-Equipment is specialized in CPT equipment and has years of experience in this research domain. Our soil sampling kit is lightweight, but powerful and much more versatile than hand-operated drilling ...
-
Manufactured by Codetelbased in FRANCE
The TREX® 210 MG is a new detector with lightweight and ergonomic design of compact shape and very low power consumption for humanitarian Mine Action carried out by indigenous deminers in third world conditions. It combines the handiness and ease of operation of the thousand fold proven EB 420 with the latest technology of ground compensation. The hand held, battery operated eddy current ...
-
Manufactured by Shandong Future Robot Co., Ltdbased in CHINA
Underwater Track Robot,driven by Hydraulic drive,5 axis stainless steel hydraulic manipulator can stretch to 1800mm and be 360 degree rotary with lifting weight 150kg,working depth can reach 600M,and it has very strong practicability.This robot is widely used in underwater construction,deep-sea excavation,deep-sea mining,deep-sea salvage,shipwreck archaeology,pipeline dredging,fire-fighting work ...
-
Manufactured by Microdrones GmbHbased in GERMANY
Want to Use A LiDAR Drone System to Quickly Make 3D Pointclouds? mdLiDAR3000 is a professional UAV solution. The newest LiDAR system from Microdrones is revolutionary. Three years in the making, we perfectly integrated our heavy lifting md4-3000 drone with a Riegl LiDAR and a SONY camera for rapidly producing colorized pointclouds. ...
-
Manufactured by Sensors & Software - an SPX Corporation brandbased in CANADA
The Noggin 1000 is essential for shallow applications such as concrete inspection and road infrastructure projects where resolution is critical. It has a center frequency of 1000 ...
-
Manufactured by Teledyne Optech Incorporatedbased in CANADA
The Optech Eclipse is the first autonomous airborne system to focus on operator-less data collection from tightly integrated passive and active imaging sensors on low-cost platforms. Designed specifically for the efficient data collection of smaller project areas and corridor applications, the Eclipse requires only a pilot for ...
-
Manufactured by RIEGL Laser Measurement Systems GmbHbased in AUSTRIA
The new RIEGL VUX-120 is a lightweight and versatile airborne laser scanner offering a wide field of view of 100 degrees and an extremely fast data acquisition rate of up to 1.8 MHz. Thus, it is perfectly suited for high point density corridor mapping applications. The measuring beam of the RIEGL VUX-120 is consecutively scanned in three different directions: it alternates from strictly nadir, to ...
-
based in USA
GeoView owns and operates over 24 Ground Penetrating Radar (GPR) systems from the world's leading manufacturers including MALA and GSSI. GeoView's senior personnel have been using GPR for over 20 years and are well versed in the applications and limitations of the ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
Specifically designed for very shallow, high resolution resistivity and induced polarization sounding and profiling, the Kid is the most compact of the Syscal range whilst retaining the well-known reliability and measurement accuracy of its counter parts. Easy-to-use, automatic, field proof, with its 1 measurement channel, the Syscal Kid is ideal for archaeological, geological mapping and civil ...
-
Manufactured by ImpulseRadar Sweden ABbased in SWEDEN
GPR is an acronym for Ground Penetrating Radar, and as the name implies, it’s a radar system that you use to image the subsurface. It may be used on a host of different penetrable materials to detect and map features or objects within. The technology has been widely accepted and is routinely used for various applications such as mapping utilities, bedrock, cavities/sinkholes, archaeological ...
-
Manufactured by Guideline Geobased in SWEDEN
Designed on a modular platform, MALÅ ProfessionalExplorer (ProEx) is the most versatile control unit in the MALÅ range and replaces the world famous RAMAC/GPR ...
-
Manufactured by Beijing Lcocean Science and Technology Co. Ltd.based in CHINA
Shark-S450S is the affordable high performance towed side scan sonar which produces high resolution images. It provides long range coverage and high resolution images to 150m per side at 450 kHz , utilising advanced digital CHIRP acoustic technology developed. A strong stainless steel towfish, a high strength Kevlar cable, a splashproof deck unit and the OTech software are included in the sonar ...
-
Manufactured by OKM Detectorsbased in GERMANY
Our metal detecting accessories are compatible with many metal detectors and are used to optimize the measuring process and support the analysis of the targets. Our completely redesigned Power Pack for OKM metal detecting instruments is a compact external power supply. The Lithium Polymer cell with high capacity of 4400 mAh keeps your metal detector working – even when you are out in the ...
-
Manufactured by Sherwood Scientific Ltdbased in UNITED KINGDOM
The Magnetic Susceptibility Balance - AUTO is a microprocessor controlled, state of the art balance for detecting the magnetic properties of gases, liquids and solids. The improved sensitivity, versatility and overall performance make it ideally suited for new analytical applications in the research laboratory and industrial quality quality ...
-
Manufactured by Sensofarbased in SPAIN
The S wide is a dedicated system designed to rapidly measure large sample areas up to 300 x 300 mm. It provides all the benefits of a digital microscope integrated into a high resolution measuring instrument. Extremely easy-to-use with one single button acquisition. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you