Asbestos Compliance Services For Environmental Management Available In Yukon
-
based in USA
The analysis of Bulk Building Materials for asbestos content is conducted by PLM, XRD, SEM and TEM. There are thousands of materials used in construction that contain asbestos. These materials include, but are not limited to pipe and boiler insulation, acoustical coatings, sprayed-on fire proofing, plasters, ceiling tiles, and floor ...
-
based in USA
Tidewater’s Environmental Safety and Health (ES&H) Services Division has the resources and experience to provide quality, cost-effective solutions for industrial hygiene, occupational safety and health, hazardous materials and staff augmentation services. These services are managed from our Division office in Elkridge, MD, with projects executed through our network of regional offices ...
-
based in CANADA
An environmental site assessment is a report prepared for a real estate holding that identifies potential or existing environmental contamination liabilities. The analysis, often called an ESA, typically addresses both the underlying land as well as physical improvements to the property. ...
-
based in USA
There are six kinds of asbestos, which are naturally occurring, fibrous, heat resistant minerals. Due to their strength, flexibility, and resistance to heat, these fibers were once used extensively in building materials. Asbestos exposure can lead to illnesses, including COPD, lung cancer, and mesothelioma. Due to its dangerous nature, building materials must be tested for asbestos prior to ...
-
based in USA
Stuart D Bagley is a Certified Industrial Hygienist (CIH) and a Certified Safety Professional (CSP). He has over twenty eight years of experience in his field. He is a former US OSHA Compliance Officer. He served as a senior consultant to commercial and industrial clients and to local, state and federal government ...
-
by ALAMO 1based in USA
Alamo1 is a licensed, bonded and insured company with over fifteen years of experience in demolition. We utilize the broadest experience, the largest range of specialized plants and equipment, highly skilled personnel, and we have a total commitment to safety. We take pride in our ability to provide safe and successful demolition services of industrial, commercial, and residential structures. ...
-
based in USA
Indoor air quality concerns have become more common since the inception of the 'energy efficient' building. The indoor air quality within business office buildings and other structures, particularly those built following the energy crisis of the 1970s, may be adversely affected by a variety of conditions and factors including inadequate general ventilation system design and/or operation, ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
Asbestos analysis includes testing of bulk building materials for asbestos by performing 200 point counts (EPA 600/R-93/116). This is a detailed and more labor-intensive technique for estimating asbestos in a building material and is less subjective than a visual estimate. While the visual estimation of asbestos in a building material works well for most samples, this methodology can be very ...
-
based in CANADA
Asbestos is a naturally occurring fibrous mineral that is found in rock formations around the world. Because of its strength and resistance to heat and chemicals, asbestos has been widely used in a variety of building products such as insulation, floor and ceiling tiles, roofing materials, and wall ...
-
based in CANADA
Fire damage to properties not only creates significant physical damage, but also results in the release of an abundance of chemical compounds into the environment, which require specific attention during remediation. For example, hazardous materials such as PCBs may be released during an electrical fire involving transformer equipment, asbestos-containing building materials may be involved, ...
-
based in USA
Bureau Veritas Offers a Full Suite of Methods for Fibers in Air Samples. Bureau Veritas routinely analyzes air samples for asbestos fiber counts using NIOSH methods for phase contrast microscopy (PCM) and transmission electron microscopy (TEM). AHERA, Yamate, and ISO air sample analyses by TEM are also ...
-
based in USA
Asbestos Inspections: The SRP Environmental Asbestos Division has over 50 years of experience. All Asbestos inspections are conducted by experienced licensed asbestos inspectors following NESHAPS and/or AHERA requirements. Sample analysis is performed by an NVLAP-accredited ...
-
based in USA
From coast to coast, Apex provides turnkey hazardous materials services for the largest Fortune 200 REIT, lender, and retail clients. Within days of notice, we are on-site to identify the presence of asbestos and lead, equipment containing PCBs and mercury, and other hazardous materials; develop abatement specifications; and provide turnkey abatement oversight. We consistently meet tight ...
-
based in UNITED KINGDOM
Asbestos repair and encapsulation can be utilised to manage and prolong the life of your asbestos containing materials. It is not always necessary to remove asbestos from its current location, in fact the Health and Safety Executive recommend that it is left in situ and managed as long as it is in a good condition. Asbestos removal can be an expensive exercise to have undertaken and asbestos ...
-
based in CANADA
Cost Effective, Compliant & Comprehensive Abatement Solutions: The experience that comes from preparing thousands of asbestos abatement projects has taught Enviro-Vac workers to do it right and with great care. Enviro-Vac maintains an excellent working relationship with industrial hygienists and air monitoring laboratories to insure adherence to all job ...
-
based in USA
GEI provides integrated solutions for environmentally impaired properties. We strive to develop solutions that create value while at the same time mitigating risk. Our approach is to tailor the use of innovative technologies for characterization and remediation to the specific redevelopment and regulatory goals for the ...
-
based in USA
From soils, to concrete, to steel. Many different materials can be specifically designed and tested to help ensure that they are best suited for each application. This can help keep costs to a minimum for a quality product, or help to gain green credits for a LEED ...
-
based in USA
Many times regulation does not specifically require an issue be considered or it may be out of scope for a routine Phase I ESA. Or, in other cases addressing a particular issue does not neatly fit under a broad based program such as the Clean Water or Air Acts. There are a variety of facility assessments, supported by sampling or field observation that allow you to remain in compliance. Four of ...
-
based in USA
MSDSWriter's expertise is firmly rooted in hazard communication and waste management consulting in general, so we are able to deliver projects that extend beyond just the SDS. Our senior project manager, Atanu Das, has been an integral leader in construction management ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
Asbestos analysis includes testing of rocks (and soils) for asbestos using the California Air Resource Board 435 (CARB 435) method. The CARB 435 method is a specialized method used for testing asbestos content in the serpentine aggregate storage piles, on conveyer belts, and on covered surfaces such as roads, play-yards, shoulders and parking lots. The method includes crushing the sample using a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you