Environmental Industry Equipment In Denmark
-
ShowcaseManufactured by ACA Industrybased in DENMARK
Crusher for recycling of mineral wool, glass wool and sliver foil. The crusher opens and crushes the insulation material and separates it from the wrapping, which is subsequently removed and recycled. The crusher can crush the insulation material to the particle size desired by the customer. The ACA crusher is very well suited for crushing of insulation material destined for recycling, whether ...
-
ShowcaseManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
Gets the Process Going: Reliably High Output and Consistent Particle Sizes. The Lindner Jupiter single-shaft primary shredder combines everything you need for efficient 24/7 operation: a powerful countershaft drive, a well-engineered machine design and high manufacturing quality. Undefeated by non-shreddables, our tried-and-tested technology ensures a long service life and low maintenance coupled ...
-
ShowcaseManufactured by Eureka Water Probesbased in USA
The MantaPlus 25 comes standard with temperature, pH, conductivity, and a wipered turbidity sensor, and optional ORP and depth sensors. The M+25 features our refillable pH reference, which requires no expensive consumables. Connect the MantaPlus 25 to any of our field display options for sampling in the field, or add a battery pack for autonomous deployments. Connect to a telemetry station for ...
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
ShowcaseManufactured by ACA Industrybased in DENMARK
The ACA crusher separates the wrapping from the foodstuffs, e.g. chocolate, chips, bread, fruit, etc. for subsequent recycling. The crusher is particularly well suited for crushing of foodstuffs, chocolate, chips, sweets, bread, fruit, etc. After eliminating the wrapping, the foodstuffs can be recycled as animal feed. The ACA crusher is a slow-turning, quiet machine. The size of the output can be ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while meeting global requirements for data integrity. Designed for intuitive and reliable aerosol particle counting, this newest addition to the PMS fleet ...
-
ShowcaseManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The Falmouth Scientific HMS-624 Side Scan Sonar System utilizes advanced technology to provide superior imaging capabilities for deep and shallow water ...
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Industrial control systems assure data integrity, process automation, simplicity of use, and data integration. The FacilityPro® Processor provides a central hub for an environmental monitoring system. The Processor communicates with cleanroom sensors, including particle and microbial monitors, while buffering data and checking tolerances for alarm activation. As a key component of industrial ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The 4040B further expands the measurement range of your PXI digitizer with EXTRA bandwidth and better passband flatness. Real-world signals ranging from 100 V supplies to millivolt detector outputs can be easily connected to your digitizer or scope. Elevated voltages and noisy environments prevent most digitizers from making acceptable measurements because the signals of interest are outside the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.3 - 25.0 µm; 1.0 CFM (28.3 LPM) - Built-in pump, choose wireless, analog & digital I/O. Particle Measuring Systems (PMS) is proud to introduce the IsoAir Pro-Plus remote particle counter. This next-generation in Contamination Control Strategy is a fixed environmental monitoring instrument that uses the latest technologies to simplify cleanroom monitoring into a ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
LiQuilaz II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
MIL SPEC Shock, Drop & Vibration Rated; Washable; 2000 Hour Battery Life; Accurate: ±(0.04% rdg + 0.3 °C) with Certificate of Traceability; 2 Year Calibration Guarantee with 3 Year Warranty; Optional ISO 17025 Calibration Certificate ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
BKDP-M2 Display Probe Big Kelvin Display Probe, 700 Series: “Why do I have to look at the meter to read it?” is a question we hear from our customers. It may sound absurd, but we took it seriously when we introduced our new 710A grounding and bond meter. The BKDP-M2 Display Probe combines the ergonomic ruggedness of TEGAM’s BKP-M2 Probe and improves upon it by integrating a high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you