Climate Change Equipment For Environmental Management Available In Fiji
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
GT5000 Terra is the worlds smallest portable and splashproof multigas FTIR analyzer. It can measure up to 50 gases simultaneously, making it possible for you to detect the unexpected. Equipped with wireless communication, you can monitor results in real-time on your laptop or ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-U500 based on the principle of tunable semiconductor laser absorption spectroscopy (TDLAS), laser gas analyzer scans and analyzes the gas absorption lines of specific wavelength, and realizes the gas concentration measurement by combining the digital lock-in amplifier and the advanced technology of long optical path. laser gas analyzer can realize high resolution, high precision, ...
-
PremiumManufactured by Harp Renewables Limitedbased in IRELAND
Harp BioDigesters reduce and eliminate harmful GHG emissions by limiting the oxidation of carbon during our proprietary waste conversion process, and by sequestering the carbon in the resulting soil product(s). We not only reduce waste volume and sequester carbon, but we also reduce waste transportation and the overall real estate area needed for landfills (or compost areas). We can thus provide ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Reverse osmosis water treatment systems are used to desalinate sea water by utilizing the latest advanced technology . You can meet the methods preferred by municipalities or businesses on our site where you can examine all alternatives for the treatment of sea water . In case of low capacities, important privileges are obtained thanks to this method, which is seen to be less costly than other ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Datum’s Marine Shaft Power Meter Systems are developed to provide real time and ongoing power monitoring data on propulsion shafts, thrusters and diesel generators. These devices are commonly used for fuel economy monitoring and equipment maintenance planning programs and can be used in conjunction with our EEXI | ShaPoLi solution to keep vessel owners in line with the latest legislation. ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6113 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who need the ability to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6113 may also be ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The instrument ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6123 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who do not need to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6123 may also be ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Since ozone is a very unstable gas, an ozone generator continuously producing ozone span gas is needed to calibrate ozone analyzers. This apparatus can be calibrated only to a limited extent because the ozone generator is controlled by the intensity of the UV ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The most commonly analyzed gas using a greenhouse gas analyzer is carbon dioxide (CO2). Other common gases that can be detected include methane (CH4), nitrous oxide (N2O), and various fluorinated gases. The two primary measurement techniques used for detecting these greenhouse gases are absorption spectroscopy and non-dispersive infrared detection. We mainly use NDIR technology to detect CH4, ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
Continental Controls Corporation’s Gas Substitution System (GSS) is an innovative product that allows diesel engines to operate on a combination of natural gas and other low-cost gases, such as biogas, landfill gas, or digester gas with traditional diesel fuel. The GSS system is designed to provide reliable and efficient combustion control for these blended gases while maximizing fuel ...
-
PremiumManufactured by ENVEAbased in FRANCE
Biogenic or carbon-neutral stack CO2 gas can be deductible from any company’s greenhouse gas inventory which is required for reporting under various ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total air pollution. The method utilised ensures that the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6511 gas analyzer offers unparalleled accuracy and performance. It’s designed to meet and exceed performance requirements for portable or fixed leak detectors of toxics or combustibles. Superior performance and reliability. Enhanced optics and electronics. Highly accurate calibration. Extensive software architecture. Rapid ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 9100 Computerized Ambient Monitoring Calibration System consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The Series 9100 is operated through a large, worksheet format screen or may be remotely operated using optional ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The OG-3 ozone source calibrator is for calibration verification and simple approximate calibration of ozone instruments. It’s available in either 2 outputs: .1 ppm or 1 ppm. The OG-3 is powered by an AC adapter supplying 12 VDC. The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in a laboratory by comparison with a NIST traceable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you