Climate Change Equipment For Environmental Management Available In Zimbabwe
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
PremiumManufactured by Cloud Tech Pvt. Ltd.based in INDIA
Cloud Tech is at the frontier of developing qualified and high performing cooling system for firm, household, corporate bodies, management and organizations etc. among ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The instrument ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Datum’s Marine Shaft Power Meter Systems are developed to provide real time and ongoing power monitoring data on propulsion shafts, thrusters and diesel generators. These devices are commonly used for fuel economy monitoring and equipment maintenance planning programs and can be used in conjunction with our EEXI | ShaPoLi solution to keep vessel owners in line with the latest legislation. ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Fast mid-range measurements in cities or near industrial areas. The GC955 118 Methane model from Synspec is specifically designed to provide fast mid-range measurements in cities and near industries. It is equipped with a compact oven with a column that separates methane from other hydrocarbons, and features an FID detector resulting in two distinct peaks: one for methane and one for total ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6123 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who do not need to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6123 may also be ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Monitoring Wind Turbine Efficiency: Datum’s Wind Turbine Condition Monitoring System is suitable for both offshore and onshire wind turbines. It is designed monitor turbine efficiency, detect and prevent failures of generators, gearboxes and rotor bearings through highly accurate real-time condition and vibration monitoring. Attached to the driveline of a wind turbine, e.g. between gearbox ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total air pollution. The method utilised ensures that the ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Measuring CO2 gas involves the use of two main technologies: Tunable Diode Laser Absorption Spectroscopy (TDLAS) and Non-Dispersive Infrared (NDIR). TDLAS is a relatively new technology that relies on the absorption of light in order to measure the concentration of CO2 in a gas. It uses a laser to detect the molecules in a sample, and then calculates the concentration based on their optical ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Since ozone is a very unstable gas, an ozone generator continuously producing ozone span gas is needed to calibrate ozone analyzers. This apparatus can be calibrated only to a limited extent because the ozone generator is controlled by the intensity of the UV ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by Harp Renewables Limitedbased in IRELAND
Harp BioDigesters reduce and eliminate harmful GHG emissions by limiting the oxidation of carbon during our proprietary waste conversion process, and by sequestering the carbon in the resulting soil product(s). We not only reduce waste volume and sequester carbon, but we also reduce waste transportation and the overall real estate area needed for landfills (or compost areas). We can thus provide ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-U500 based on the principle of tunable semiconductor laser absorption spectroscopy (TDLAS), laser gas analyzer scans and analyzes the gas absorption lines of specific wavelength, and realizes the gas concentration measurement by combining the digital lock-in amplifier and the advanced technology of long optical path. laser gas analyzer can realize high resolution, high precision, ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
GT5000 Terra is the worlds smallest portable and splashproof multigas FTIR analyzer. It can measure up to 50 gases simultaneously, making it possible for you to detect the unexpected. Equipped with wireless communication, you can monitor results in real-time on your laptop or ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The OG-3 ozone source calibrator is for calibration verification and simple approximate calibration of ozone instruments. It’s available in either 2 outputs: .1 ppm or 1 ppm. The OG-3 is powered by an AC adapter supplying 12 VDC. The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in a laboratory by comparison with a NIST traceable ...
-
PremiumManufactured by Avecom NVbased in BELGIUM
A patented gas fermentation process, revolutionizing the future of food production. A patented gas fermentation process, revolutionizing the future of food production. Power To Protein is Avecom’s biomass fermentation platform to convert carbon dioxide (CO2) into protein-rich ingredients for human consumption. The process uses green hydrogen as an energy source. Microbial protein or Single ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you