Compliance Management Articles

  • ERG supplied a £2.3m waste gas treatment plant. Over 2 years on and the plant continues to deliver emissions compliance for Saffil - Case study

    Summer 2015 marked the completion of two years successful operation of an ERG (Air Pollution Control) Ltd designed, installed and commissioned waste gas treatment plant at the Saffil production facility in Widnes.  Background Saffil Ltd, a wholly owned subsidiary of Unifrax, produces high temperature insulation products, for use in automotive catalytic convertors and other ...

  • Compliance Trends in 2017: what to expect, how to prepare

    Looking back on 2016, it was without doubt a year of political upheaval and increased scrutiny on the environmental, social and human rights implications of government regulations, corporate practices and consumer habits. In 2017, these changes will fuel additional compliance considerations for corporate supply chains around the world. While the future is anything but certain, our regulatory ...


    By Assent Compliance Inc.

  • Top 10 Compliance Storylines from 2016

    For the compliance sector, 2016 was a critical year. It was a year in which regional government bodies around the globe took on greater responsibility as gatekeepers of environmental and human rights standards in the corporate sector. It was also the year of the investor, where corporate decision makers became more concerned with transparency and accountability in supply chains. ...


    By Assent Compliance Inc.

  • One Year Until the ELD Mandate Compliance Date: Common Questions and How to Prepare

    A year ago, the ELD Mandate regulation was released as a final rule, and carriers now have one year until the compliance date of December 18, 2017. Step one in preparing for ELD compliance should be using the time you have now to understand the details of the regulation. Omnitracs has received a lot of questions from customers and we’re going to share some common themes. Common theme #1: ...


    By Omnitracs, LLC

  • Planning Compliance – Why Bother?

    In this week’s edition of The Planner newsletter, there is an article entitled Enforcement officers are ‘unsung heroes’ – quoting a speech given at the recent National Association for Planning Enforcement (NAPE) conference. ...

  • Trends and projections in the EU ETS in 2016 — The EU Emissions Trading System in numbers

    About this report This 2016 report of the European Environment Agency (EEA) provides an analysis of past, present and future emissions trends under the EU Emissions Trading System (ETS), based on the latest data and information available from the European Commission (i.e. May 2016 data on verified emissions and compliance by operators under the EU ETS for the years up until 2015) and Member ...

  • Run the supply chain of tomorrow

    Internet of Things for your inventory control If you want to make effective decisions, the availability of high-quality online and real-time data is essential. From simple monitoring and visualization of tanks and silos through to monitoring on a global scale: Our modular solutions for inventory control guarantee complete inventory visibility 24 hours a day, 7 days a week, anywhere ...


    By Endress Hauser

  • ISO 45001 (Occupational Health & Safety) – Could it Lead to more Stringent Provisions Around Legal Compliance?

    It was announced this summer (in June 2016) that the publication of the much-anticipated ISO 45001 Management System Standard for Occupational Safety & Health is to be delayed by at least a year. Initially, the plan had been for the standard to be available ...

  • 5 Tips for Managing EHS Compliance Across Global Tech Company Operations

    Environment, health and safety (EHS) professionals know their job isn’t simply achieving compliance, but rather sustaining compliance in an ever-changing regulatory environment. But staying on top of changing regulations and requirements is difficult at best. For tech companies with facilities around the world, the challenge to stay current on changing ...


    By Antea Group - USA

  • Hydrocarbon Processing: Non-phosphorus corrosion inhibitor optimizes cooling tower uptime for environmental compliance

    Cooling water systems play a critical role in the efficient operation of hydrocarbon processing facilities. Ensuring that these systems efficiently cool and condense the various process streams is essential to minimizing operating costs and maximizing plant performance and profitability. Common challenges to maintaining these systems at peak performance come in the form of corrosion, pitting and ...


    By Baker Hughes

  • ARCO Chemical - Case Study

    Custom Designed Furnace Reclaims $100,000 Condenser PCPC burn-off oven removed 4,240 lbs. of styrene polymer in compliance with local environmental laws. The Problem: ARCO Chemical Company's Beaver Valley plant in Monaca, PA, a manufacturer of styrene-based plastics, was experiencing severe problems and expense with the periodic cleaning of their ...

  • 5 Errors That May be Impacting Your GFSI Compliance

    What is GFSI? The Global Food Safety Initiative (GFSI) is a global initiative for the continuous improvement of food safety management systems. The initiative’s goal is to ensure confidence in the delivery of safe food to consumers around the world. The initiative was launched in 2000 following a number of food safety crises that severely diminished consumers’ ...


    By Intelex Technologies Inc.

  • How Tech Companies Can Overcome 5 Global EHS Compliance Challenges

    Tech companies big and small are expanding globally. From increasing sales to decreasing costs to filling a market need, there are a myriad of reasons why tech companies go global. Environment, health and safety (EHS) compliance requirements in new countries are often unforeseen obstacles to a tech company's expansion plans, especially when there are limited EHS ...


    By Antea Group - USA

  • Case study - UL The Wercs upgrades Nazdar’s labeling capabilities providing efficiency and flexibility

    Situation With four manufacturing facilities and 13 branch locations worldwide, Nazdar is the largest ink manufacturer in North America. In business nearly 90 years, the company offers the most comprehensive selection of inks available to the market from a single source. The company provides extensive regulatory compliance training to manufacturing associations and printers, making its ...


    By UL The WERCS

  • NextEra Environmental Compliance - Case Study

    Learn how NextEra (formerly FPL) uses mobility to manage their Environmental Compliance from the field.  Ian Cohen from NextEra discusses their use of regAction and how it has helped them maintain compliance.  NextEra is currently utilizing programs from regAction to track and manage their Audits, Incidents and Compliance related initiatives.  There is also a mobile component that ...


    By regAction

  • While Oil Prices are Down, Get Up on Compliance

    It’s no secret that the oil and gas industry has taken a hit lately, with per-barrel prices dipping to as low as $27. The saturated market and low prices have many companies putting a hold on drilling. While no one in our industry likes dipping oil prices, there are two things you can do to weather the storm until those prices take a (much welcomed) upward turn: Stay up to date on ...


    By ABUTEC LLC

  • Case study - Stocking spare parts for your oxidizer system

    OXIDIZER SERVICE SERIES: PART 3 At the risk of sounding repetitive, the very same wording with which we began Part 2 of our Oxidizer Service Series -Crafting Your Oxidizer Maintenance Plan - applies to Stocking Spare Parts for your Oxidizer System as well.  In other words… Many will come to this article hoping for a one-size-fits-all list for stocking spare parts for an oxidizer ...

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • Public health risk assessment tool: strategy to improve public policy framework for onsite wastewater treatment systems (OWTS)

    Public health risk assessment of onsite wastewater treatment systems (OWTS) in the city of Port Harcourt, Nigeria and its environs was carried out between the period of August 2012 and April 2013. The objective of the study was to show how the public health risk assessment tool can be used to improve public policies on OWTS. The study involved desk study reviews of the related literature on ...


    By IWA Publishing

  • Medical Industry: Compliance Problems Solved by Ethylene Oxide Scrubber at Specialty Gas Plant Case Study

    The ethylene glycol produced in the ethylene oxide scrubbing operation acts as an antifreeze to allow year-round operation. Problem: A specialty gas producer was confronted with an EPA compliance problem in dealing with ethylene oxide (EtO). The chemical had been added to the toxicity lists of the U.S. EPA and the Occupational Safety and Health Administration ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you