Contaminant Plumes Equipment For Environmental Management Near Australasia
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The Micro Pulse LiDAR (MPL) is elastic backscatter LiDAR designed for long-term, autonomous aerosol and cloud monitoring. Pulses of energy are transmitted into the atmosphere; the energy scattered back to the transceiver is collected and measured as a time-resolved signal, thereby detecting clouds and aerosols in real time. MPL data can be used for measurement of cloud boundaries, calculating ...
-
Manufactured by Evapco Inc.based in USA
Thanks to EVAPCO’s cutting edge finned coil technology, the ATC-DC is the ultimate solution for food process and large tonnage industrial process installations seeking the highest dry bulb switchover temperatures, reduced water usage, high peak-load output, and plume abatement. The ultimate in wet/dry performance, every ATC-DC model has been engineered to provide a minimum 50% of the design ...
-
Manufactured by Evapco Inc.based in USA
Dramatically reduced water consumption: Thanks to EVAPCO’s cutting edge finned coil technology, the eco-Hybrid is the ultimate solution for both HVAC and large tonnage industrial process installations seeking the highest dry bulb switchover temperatures, reduced water usage, high peak-load output, and plume abatement. Available with a sophisticated SAGE control system and factory-mounted ...
-
Manufactured by Envirocare International, Inc.based in USA
Proven Process Advancements for Abatement of Reactive Plumes and Reduction of SO2. The MicroMist ML micro-fine lime semi-dry injection system is a proven, cost-effective SO2 removal and reactive plume abatement technology. The patented MicroMist ML system, has been shown to reduce SO2 by more than 90 percent while eliminating the secondary plume resulting from the condensation and reaction of ...
-
Manufactured by Aquaread Limitedbased in UNITED KINGDOM
The LeveLine-CTD is a water level, temperature, conductivity and salinity recording device that has been specifically designed for long term water level logging. It is made from titanium making it suitable for deployment in all water ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
Manufactured by Van Essen Instruments - part of Nova Metrix LLCbased in NETHERLANDS
The Diver-Link is a complete telemetry solution. A complete remote monitoring system that integrates field instrumentation with wireless communication and data management to effectively manage (ground)water resources. The Diver-Link is suitable for the continuous long and short-term monitoring ...
-
Manufactured by Fastwavebased in AUSTRALIA
The Wave Glider is a low-profile, unmanned surface vehicle that is capable of long-range, extended deployments with minimal human intervention. It is propelled by wave generated energy, with solar panel arrays providing power for on-board communications, sensor payloads and computing. ...
-
Manufactured by Fastwavebased in AUSTRALIA
A New Paradigm in Marine Data Acquisition. Ocean gliders provide dynamic, high density data sampling from the water column in near real-time, enabling timely, quantitative assessment of the environmental risks associated with dredge plumes, oil spills, outfall discharges, sediment run-off, drilling discharges ...
-
Manufactured by Fastwavebased in AUSTRALIA
The unique underwater configuration of the OceanStar system enables the use of small, easily deployed relay buoys. The system has proven reliability in all weather conditions, including ...
-
Manufactured by Fastwavebased in AUSTRALIA
The Voyager drifter buoy provides near real-time ocean current, sea surface temperature and oil spill tracking data via Iridium satellite telemetry. Unlike spherical drift buoys, the Voyager's unique fin design and low freeboard ensures close coupling with the ocean surface layer and minimum wind influence. The Voyager has very simple operation and deployment procedures, making it ideal for oil ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 407 Bladder Pump has a durable PFAS-free PTFE bladder ideal for dedication, and ensures no air/water contact during groundwater sampling. Inexpensive, disposable LDPE bladders are also available for short term applications. Solinst offers 316 stainless steel pumps in diameters of 1" and 1.66" (25 mm and 42 mm). They are ideal for low flow and VOC sampling. Maximum lift capability is 150 m ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Model 615 ML Multilevel Drive-Point Piezometer system can provide several monitoring zones in one drive location. The 615 ML Ports have a dual barbed stem that allows the connection of either 3/8" OD or 1/4" OD tubing to create up to 3 or 6 monitoring zones, respectively. The 615 ML Multilevel System is installed using extensions and a Manual Slide Hammer, similar to standard 615 ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 703 Waterloo Emitter™ is a simple, low cost device for the controlled release of oxygen or other amendments to encourage and sustain the growth of microorganisms, required for in-situ bioremediation of contaminated groundwater. Ideal for the diffusion of oxygen to enhance the bioremediation of BTEX and MTBE. Emitters provide immediate bioavailability of molecular oxygen for aerobic ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for model calibration. Narrow 3-channel option as ...
-
PremiumManufactured by Trojan Technologies - Veraltobased in CANADA
In many areas, localized releases of industrial chemicals, pesticides, and fuel components such as benzene and hydrazine. have impaired groundwater quality. These groundwater "plumes" are commonplace, and in many cases impact public water supplies or impedes the redevelopment of potentially valuable ...
-
Manufactured by RS DYNAMICS LLCbased in SWITZERLAND
These products combine the advantages of advanced excellent PID and IR technology. The ECOPROBE 5 replaces a number of separate analysing devices with one small, compact instrument. It provides the user with the in-situ measurement of organic contaminants with selective analyses of methane, group of common petroleum hydrocarbons, CO2, O2, atmospheric pressure, sampling vacuum and soil ...
-
Manufactured by SPX Cooling Technologies, Inc. - a division of SPX Corporationbased in USA
Plume from a cooling tower can pose several issues. It may affect visibility and safety as well as public perception. Plume abatement is the process of removing this visible plume. ClearSky is a fully integrated system that operates more reliably than coil-based systems. By using a series of PVC heat exchanger modules in the tower plenum, ambient air condenses much of the moisture before it exits ...
-
Manufactured by Rakshan Cooling Towersbased in INDIA
Our company has always been committed to offer quality-assured Dry Cooling Tower. The offered cooling tower is widely used to remove heat from power generations units, steel casting foundries, rubber industry, petroleum refineries, etc. In order to increase the cooling rate, this tower is one of the best product for consumption in hot-humid climate. This cooling tower does not use evaporation. ...
-
Manufactured by C.E.R.E.S. Corporationbased in USA
Zero Valent Iron – High quality and purity micro-scale iron powder and granules for in situ chemical reduction for source areas, permeable reactive barriers, and other soil and groundwater remediation applications. Also commonly utilized in above ground water treatment systems for selenium, chlorinated compounds and heavy metals. CERES Zero Valent Iron (ZVI) powder is produced by different ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you