Drilling Waste Applications

18 Results found
Only show results available in Virginia?
OK
  • Category: Environmental Management ×

  • Subcategory: Drilling Waste ×

XRF analysis for metals exploration & mining

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

Hazardous waste treatment solutions for oil and gas industry

by econ industries GmbH     based in Starnberg, GERMANY

There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

Drill Cuttings

by econ industries GmbH     based in Starnberg, GERMANY

Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry® technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM. Find more information and the benefits of VacuDry® drill cuttings plants on http://www.econindustries.com/applications/drill-cuttings

Mercury Waste

by econ industries GmbH     based in Starnberg, GERMANY

Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide. Find more information an the benefits of VacuDry® mercury waste plants on http://www.econindustries.com/applications/mercury-wastes

Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. Then a third column is used in conjunction with a second 10-port valve for individual analysis of methane. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

Pulsair`s industrial drilling mud agitators for oil & gas industry

by Pulsair Systems, Inc     based in Bellevue, WASHINGTON (USA)

Industrial drilling mud agitators and mixing equipment for oil & gas exploration. Pulsair Systems supplies oil & gas operators with industrial drilling mud mixer agitators for mud tank mixing. The Pulsair mixing process quickly allows drillers and operators to ensure homogenous mud consistency for their drilling mud needs.

Industry

by Dragflow S.r.l.     based in Villafranca, ITALY

Dragflow is a world leader in slurry pumping solutions. Dragflow pumps can handle all slurry from dirty water to the very heavy slurries with solid concentration up to 70% by weigh. Thanks to its twenty five and more years of experience in the most difficult pumping application Dragflow is able to satisfy the most demanding customer in the industrial and construction market.

Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

by OSEI - Oil Spill Eater International, Corp     based in Dallas, TEXAS (USA)

The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

Wastewater treatment for the metal industry

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Wastewater and process water treatment in the metal industry. Industrial waste water or circuit water in the metal industry can be broken down into many comprehensive, subject-specific areas. AWAS has developed various methods of treatment technology for the metal industry in the last 30 years. Generally we accept any environmental challenge and like to respond to individual problems.

Albin peristaltic`s pumps for chemical industry

by Albin Pump SAS     based in Goteborg, SWEDEN

Pumping / transfert / dosing various acids, PVDF latex, alcohol, soap, non aromatic solvents, acids, alkalis, suspensions, stabilizers, glue, crude oil, solvents, heavy oils, cleaning of petroleum sludge food industry, in drilling plants.

Decanter centrifuge for drilling mud solids control

by GN Decanter Centrifuge Ltd     based in Hebei, CHINA

Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their flow properties.

Decanter centrifuge & cuttings for drilling waste management & disposal

by GN Decanter Centrifuge Ltd     based in Hebei, CHINA

Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

Measurement of C1-C5 hydrocarbons for oil & gas exploration.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

Centrifuges for Industrial Waste Water, Minerals and Oil

by Flottweg SE     based in Vilsbiburg, GERMANY

Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil from the cleaning of crude oil tanks. Processing of drilling slurry, drilling emulsion and drilling muds. Processing of ore and minerals.

Fast C1 to C5 - PetroAlert Series 9100

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

Industrial matter treatment for the recycling industry

by Pieralisi Group     based in Jesi, ITALY

In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

Pumping solutions for offshore liquid ring pump systems

by Samson Pumps A/S     based in Viborg, DENMARK

In offshore drilling, the safety of both people and the environment is dependent on the constant management of risk. With great public concern and media attention, the safety of offshore drilling for both people and environment, has been widely discussed for many years. Offshore drilling can potentially cause oil spills or disposal of other waste into the ocean, impacting human life and marine life.

Need help finding the right suppliers?

Let the XPRTs do the work for you