We couldn't find any ehs for buildings equipment suppliers or service providers located in North Dakota
Here is a list of equipment results with suppliers serving North Dakota
EHS For Buildings Equipment For Environmental Management Available In North Dakota
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
AlphaE is a professional meter for Radon concentration, personal exposure and doses. This ultra-small and light-weight instrument comes with an optional belt bag, an alternative for ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT 500 is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT 500 is economically formulated specifically for horizontal applications. LIQUID BOOT 500 spray application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered gas vapor ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
ENVI BioScout provides a robust and sensitive bioaerosol detection solution that continuously monitors and warns for the presence of harmful airborne biological particles like bacterial, viral, rickettsial agents and toxins and collects air samples for further BWA analysis at the time of a biological alarm. ENVI Bioscout bioaerosol detector is designed to operate as an integral part of fixed or ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH4 is a robust CH4 Gas Monitor that can measure methane levels in the air. This CH4 gas detector uses NDIR technology to measure CH4 concentration in the air. The industrial methane monitor is equipped with a nondispersive infrared absorption (NDIR) sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
REMOTE MONITORING FOR RECTIFIERS, TEST POINTS AND BONDS with two-way communication and GPS-synchronized interruption. Building on the comprehensive monitoring capabilities of the RMU2, the RMU3 adds two-way communication for accurate, remotely controlled configuration and GPS-synchronized interruption of rectifiers. The RMU3 is a high reliability device engineered to control and monitor ...
-
PremiumManufactured by CETCObased in USA
ULTRADRAIN consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Ultradrain also has a protection sheet bonded to the ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO2 is a robust NO2 Gas Monitor that can measure Nitrogen Dioxide parameters in the air. This NO2 gas detector uses Electrochemical Sensing technology to measure total NO2 in the air. The monitor is equipped with the NO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH2O is a robust CH2O Gas Monitor that can measure formaldehyde levels in the air. This CH2O gas detector uses electrochemical sensing technology to measure CH2O concentration in the air. The industrial formaldehyde monitor is equipped with an electrochemical sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by AMS, Inc.based in USA
Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated vapor intrusion from beneath buildings and offers an ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot SO2 is a robust SO2 Gas Monitor that can measure Sulfur Dioxide parameters in the air. This SO2 gas detector uses Electrochemical Sensing technology to measure total SO2 in the air. The monitor is equipped with an SO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The new industrial Cyclops PTZx Zoom Inspection Cameras are high end devices specially designed to inspect critical plant assets, infrastructure, nuclear pressure vessels, cooling pumps, channel heads, tanks, heat exchangers, fuel pools, process utilities, oil rigs, large diameter piping, wells, etc.. The system can be used to inspect these areas, view processes, monitor the build up of dirt/ ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot VOC is a robust VOC Gas Monitor that can measure Volatile Organic Compounds in the air. This VOC gas detector uses photoionization detection (PID) technology to measure total volatile organic compounds in the air. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CO2 is a robust CO2 Gas Monitor that can measure Carbon Dioxide parameters in the air. This CO2 gas detector uses NDIR Sensing technology to measure total CO2 concentration in the air. The monitor is equipped with a CO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumManufactured by KISTERSbased in GERMANY
The WS Series compact weather sensors are designed for reliable and maintenance-free measurements in hydrology, meteorology and weather-dependent applications where durability, precision and operations in different moderate climatic conditions and wind speed up to 45 m/s are ...
-
PremiumManufactured by KISTERSbased in GERMANY
HyQuest Solutions’ ultrasonic anemometers AR200 and WS200 provide precise and maintenance-free measurement of wind speed and wind direction. The compact devices are designed for applications in hydrology, meteorology and other weather-dependent applications where durability, precision and operations in different moderate climatic conditions are ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Random media are installed in submerged moving bed reactors in municipal and industrial waste water treatment. They provide large specific surfaces for the growth of biofilm and feature an extremely high mechanical ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even greater contaminant resistance is achieved when LIQUID BOOT ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you