EHS For Cement Industry Equipment For Environmental Management Available In Nicaragua
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
-
PremiumManufactured by ENVEAbased in FRANCE
TDL monitor for in-situ non-invasive measurement of NH3 & H2O, HCl & H2O, HF as well as low or high concentrations of CO and O2 in process or CEMS applications. The Tunable Diode Laser Spectroscopy (TDLS) is the perfect technology to use when you are looking for a selective measurement and a fast response time on some gas components as NH3, HCL, HF or even O2 when conditions are too ...
-
PremiumManufactured by ENVEAbased in FRANCE
Contact-less and maintenance free measurement of high mass flow rates of dry bulk solids independent of pipe ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flow and detection of material blockage. The system operates with no contact in a process in which the material movement is detected by using the Doppler effect. The FlowJam is a process-secure device, since the microwave technology used can penetrate material coating on the sensor and reliably detect the material movement behind it. If ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs). AMESA-D is the most utilized dioxin monitoring ...
-
PremiumManufactured by ENVEAbased in FRANCE
MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy ...
-
PremiumManufactured by ERGAbased in TURKEY
Air separation complex Resoline Air Flow for RDF preparation. Automatic sorting complex for preparation of residue derived fuel in MSW management. ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-350 laser moisture analyzer is a high precise analyzer for gas measurement, developed based on tunable diode laser absorption spectroscopy. One-side mounting installation is much easier than cross-stack. By using a tunable semiconductor laser, LGT series laser gas analyzer scans the specific absorption lines of the measured gas(no background gas) to get the second harmonic of the gas. Through ...
-
PremiumManufactured by ENVEAbased in FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...
-
PremiumManufactured by ERGAbased in TURKEY
Plate iron separator with rugged design of casing for removal of metal contaminants from material flows transported by pneumatic ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000H is a multi-gas analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180 °C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A short-wavelength radiometric infrared borescope imaging camera for continuous temperature measurement in furnace applications with a higher differential temperature in the field of ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Our instruments can make range from ppm to % of carbon monoxide measurement according to your applications . Portable model to Online model ,extractive and In-situ installation methods. Highly accurate and reliable, as well as easy to use with intuitive menus and LCD displays. With a wide range of customizations available, our systems can be tailored to fit any application and environment. Our ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
AMETEK Land, Land Instruments International Ltd, formally announces that from the 30th September 2019 the Model 9100 Cross-stack Carbon Monoxide (CO) Monitor will be discontinued from new product ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000DN is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dedusting by sampling probe, tracing by heating pipe, the measured gas is analyzed by the hot gas analysis module (TDLAS technique). It is an effective solution to the technical problem that ...
-
ShowcaseManufactured by Cloud Tech Pvt. Ltd.based in INDIA
Cloud Tech Dust Suppression System brings state-of-the-art technology to the difficult and costly task of controlling dust at manufacturing, industrial and agricultural sites. It produces a ultra-fine water fog that effectively attracts and holds dust particles so that they can be more readily removed from the work place and other environmentally sensitive ...
-
Premiumbased in POLAND
The STX 5000C mobile terminal is equipped with a clear TFT display of very high brightness enabling operation even in harsh sunlight. The numeric keypad mounted on the terminal has large buttons facilitating user operation. The STX 5000C terminal can be mounted on forklifts and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you