EHS For Mining Industry Equipment For Environmental Management In Australasia
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Reliably collecting the separated compounds is the ultimate goal of a preparative chromatography application. The Fraction Collector C-660 collects all your samples according to time, volume or peak mode in any type of tubes or ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Y type Strainer is the most cost effective, Y strainer uses perforated wire mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system Strainers are low-cost solutions to large nominal bore straining ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Pro is an Online Dust Monitoring System specially developed to dust levels for critical applications. Dustroid Pro operates on the Laser Scattering Working Principle. Dustroid comes with a heated inlet for dehumidification of air-sample for improved accuracy and stability. Heated inlet reduces dehumidifies the air-sample by reducing humidity up to 60%, which makes it an ideal ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
EMD Millipore’s Aluspher® RP-select B HPLC column is an alkali-stable reversed-phase stationary phase designed for the chromatographic separation of neutral, basic and acidic compounds under neutral conditions. Due to its stability in the pH range of 2-12, Aluspher® RP-select B allows the use of basic eluents, such as NaOH. This suppresses the ionization of basic compounds, and thus ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Purospher® HPLC columns are based on high purity, metal-free silica for outstanding separations with excellent peak symmetry. Therefore Purospher® columns provide tailing-free separations of acidic, basic, and chelating compounds. - Excellent peak symmetry - Batch-to-batch reproducibility for reliable analysis - Balanced chromatographic properties (Tanaka Hexagon) - Excellent separation ...
-
PremiumManufactured by Finn Corporationbased in USA
Designed with time-tested features, the T330 HydroSeeder offers value, reliability and productivity to meet the needs of large-scale applications. The T330 features the highly efficient FINN proprietary centrifugal slurry pump with a 134hp John Deere diesel engine and an independently controlled pump ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Applications: Estuary, coastal zone, and fresh water data surveys from small boats. Ecosystem health monitoring. Real-time three dimensional data gathering in support of modeling. Pollution monitoring and dye tracing studies. Ground truth for satellite remote sensing. Continuous plankton monitoring and sampling. Local area site ...
-
PremiumManufactured by General Oceanics Inc.based in USA
4 Bolt Hub with 1" bushings, 5" axle tube (WOA: 5 1/4") with zerk, 4 - 1/2" studs with lock washers & nuts on 5" circle, 3 1/2" pilot hole. Weight: 3.50 lbs. ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Atlantis® Flo-Pipe® and Flo-Log® Infiltration Plates and Tubes are pre-wrapped in quality geotextile and are available in various sizes. They can be connected to each other to create any length. * Custom sizes available upon request. ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Gain insight into your oxygen consumption. Get the right O2 flow rate for optimal use and save energy, by getting insight with an oxygen flow meter. Oxygen is used in many industries, from hospitals, to fish farm to mining, from waste water treatment to metal factories, and many more. An oxygen flow meter will provide insight in the total consumption, you can allocate consumption over different ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by Ecomesurebased in FRANCE
EcomSmart collects data in real time and wirelessly transmits them to Ecomesure's advanced web platform, where they can be analyzed, managed and uploaded onto websites, smart city platforms and imported into software programs. The web platform also allows you to remotely control your ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
Manufactured by Sonic Boom Sprays, a subsidiary of Croplands Equipmentbased in AUSTRALIA
Self propelled. Cummins QSL 9.0 ltr 260 kw. 4 x 4 mechanical drive. Alison 4 speed auto. 45.5 m (150ft). 7300 ltr tank. 360 ltr flush tank. 30 ltr hand wash tank. 480/80 R 50 176A8. 650/80 R 38 176A8. Hydraulic driven hypro. 9305CHM3 2” pump. ISOBUS ready. Sonic Pran smart module. Large 100mm pressure gauges. Double suction filters. Wing tip breakaways. ...
-
Manufactured by Enviromist Pty. Ltd.based in AUSTRALIA
Compact hydraulic motor-pump unit is a combination of an SM hydraulic motor and a PSM satellite pump. It is designed to work with two different liquids and to transfer the energy supplied from the hydraulic motor fluid to the fluid of the hydraulic ...
-
Manufactured by Baldwin Industrial Systemsbased in AUSTRALIA
Unique, one step process for difficult to treat wastewater. The clay based chemical removes oils and greases, suspended solids, heavy metals, surfactants and permanently encapsulates these contaminants in a readily disposable dry sludge. Manual, semi, and fully automatic systems in stainless steel fabrication with PLC ...
-
Manufactured by Magaldi Power S.p.A.based in ITALY
Magaldi has developed a reliable belt feeder for handling hot and abrasive materials. The working concept is similar to the one of conventional belt feeders installed under hoppers, but the use of the Magaldi Superbelt® conveying technology ensures a higher resistance to heavy impacts and shock ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The touch screen operator interface, allows the operator to view, access, and control multiple remote analyzers from a convenient, central location. It is a panel-mounted, multi-page interface device, with touch-sensitive graphics for easy operation. It allows an operator to acknowledge and reset alarms, and through password protection, calibrate, read and adjust the settings of each analyzer. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you