EHS for Oil and Gas Applications

22 Results found
Only show results available in Virginia?
OK
  • Category: Environmental Management ×

  • Subcategory: EHS for Oil and Gas ×

Reduced Sulfur Compound Treatment for Refinery Wastewater

by USP Technologies     based in Atlanta, GEORGIA (US) (USA)

Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species. http://www.h2o2.com/industrial/refinery-petrochemical-applications.aspx?pid=98&name=Reduced-Sulfur-Compound-Treatment

Wilsa ElectroWaveTM - Oil Harvesting / Removal

by Hudson Industries     based in Vienna, OHIO (USA)

WILSA Harvests Oil from Tank Bottom Sludge at Disposal Well. ElectroWave™ Technology optimizes onsite processing and reduces costs associated with saltwater disposal operations by breaking waste emulsions and recovering additional oil.

Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Production (Enclosed Combustors)

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

NORM Waste

by econ industries GmbH     based in Starnberg, GERMANY

Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

Odor Control for Tank Cleaning

by OMI Industries (OMI)     based in Long Grove, ILLINOIS (USA)

When It Comes To Odor Management, Simply Cleaning The Tank Isn’t Enough To Remove The Odors

Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

Odor Control for Refining

by OMI Industries (OMI)     based in Long Grove, ILLINOIS (USA)

You Refine The Fuel, We’ll Remove The Odors

Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public.

OpenTAS TFM (Tank Farm Management)

by Implico Group     based in Hamburg, GERMANY

OpenTAS® is a highly integrated standard software solution that is able to provide the most complete solution to cover the Oil & Gas Downstream logistics processes.

Refineries & Refinery Emissions Monitoring & Analysis

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

Procal supplies the oil refining industry with both process and emission monitoring analysers to meet a wide range of applications.

Waste Treatment for Polluted Sediment

by MENART     based in Dour, BELGIUM

Recognised for the durability and longevity of its equipment, MENART is sought after by petroleum groups and other specialised companies.

Flotation

by Environmental Engineering Doellerer GmbH     based in Seefeld, GERMANY

physical chemical treatment of - oil and grease waste water - refinery waste water - waste water from slaughter houses - waste water from diaries

Biofiltration

by AquaBiotec     based in Paris, FRANCE

Biological Aerated Upflow Filtration (BAF) for high efficient Waste Water Treatment in Refinery Industry with more than 20 reference plants and more than 20 years of experience

Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

On-site refinery water treatment for oil and gas industry

by MIOX Corporation     based in Albuquerque, NEW MEXICO (USA)

MIOX offers a variety of on-site refinery water treatment solutions for cooling loops, UF & RO membranes and wastewater.

Wastewater technology for the oil exploration

by AWAS International GmbH     based in Wilnsdorf, GERMANY

In the production of crude oil the produced water plays a more and more important role in terms of ecology.

Active Refinery Remediation

by ENTACT, LLC     based in Grapevine, TEXAS (USA)

Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

Evaporators technology for oil & gas industry

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

The oil & gas industry faces water and wastewater treatment specific challenges. EVALED evaporators represent an effective solution for both downstream (onshore and offshore) and upstream plants, allowing ZLD (Zero Liquid Discharge).

Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

Oily Waste

by econ industries GmbH     based in Starnberg, GERMANY

Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry® technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment. Find more information and the benefits of VacuDry® oily waste plants on http://www.econindustries.com/applications/oily-wastes

Need help finding the right suppliers?

Let the XPRTs do the work for you