EHS For Pulp And Paper Equipment For Environmental Management Available In Virginia
-
PremiumManufactured by Myron L Companybased in USA
Obtain reliable and accurate measurements of your water source with the value-priced TechPro II. Ideal for water treatment testing as well as other industrial and commercial applications, these instruments reflect. Myron L’s 40-plus years experience designing and building quality conductivity, TDS and pH measuring ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The Bright Technologies Belt Filter Press is a modern design that includes three (3) US Patents and many innovative features that provide high performance in a compact, high value package. Many competing products are based on old and inferior designs that do not utilize filtration area effectively. Our belt press is designed with long term value and ease of operation in mind. Stainless Steel ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
MICROBE-LIFT/ PP is a highly active dry culture consortium designed for use in the biological treatment of pulp and paper waste. MICROBE-LIFT/ PP reduces shock loading, provides rapid upset recovery and provides rapid system start up following facility down time. These cultures are designed to enhance the overall biological oxidation of slow to degrade pulp and paper waste constituents to achieve ...
-
Manufactured by EnviroZyme™ - Bio-Systems Internationalbased in USA
BIOBUG® PP contains a specially formulated range of adapted high performance microorganisms and fungi. BIOBUG® PP was developed to increase efficiency and decrease costs in biological treatment of pulp and paper wastes. The range of microorganisms selected for the BIOBUG® PP products are chosen for their cellulose degradation abilities under both aerobic and anaerobic conditions. To ensure ...
-
Manufactured by Dupro Engineering Private Limited.based in INDIA
Can handle abrasive, corrosive and fibrous products, granules, powders, dry material and slurries.Glandless hence no ware tare of gland or seat. Only one moving part to be concerned with the sleeve. 100% full port design eliminates any dead spots or crevices, seats or bearings where slurry can hang up and impair operation or even cause complete valve ...
-
Manufactured by Hubluxe Engineeringbased in INDIA
Size: 15 mm to 900 mm (½” to 36”). Class: 150# to 2500#. Type: Swing check valve & Pressure seal cover (on request). ...
-
Manufactured by Neptuno Fluid Technology Lidbased in CHILE
Capacities up to 40,000 gpm (7,500 m3/h).Head up to 1,200 Feet (400 m).Power through 2000 hp (1500 kW).Pressures up to 590 psi (4,067 kPa).Frequency 50/60 Hz.Temperatures to 400 °F (200°C).Bowls s from 8' to ...
-
Manufactured by Vincent Corporationbased in USA
The Pulp Fluidizer was developed to enable pumping frozen blocks or chubs of fruit pulp while maintaining the highest level of flavor characteristics. The machine has found acceptance in fluidizing frozen pulp and pomace from both deciduous and tropical fruits. It is also used, as convenient, to liquify frozen juices in blending and not- from-concentrate operations. The unit is a premium machine ...
-
Manufactured by ITW Polymers Adhesivesbased in USA
High-performance technology for repairing, patching, and rebuilding equipment in habitually wet environments, including under ...
-
Distributed by Phoenix Pumps, Inc.based in USA
Sharpe Mixers are designed for heavy duty mixing applications. These mixers are available in a variety of sizes and ...
-
Manufactured by Newterra, Ltd.based in CANADA
Pulp and paper mill wastewater treatment produces a large amount of residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge ...
-
Manufactured by Leem Filtration Products Incbased in USA
We have all of the capabilities to help with your pressure leaf filtration needs and problems. We can provide new filters or rebuild or repair your old filters, filter leaves, and spare parts. We will help you engineer and design (or redesign) your pressure leaf filtration system. We can help you solve problems of clarity, bleed through, recycle time, plugged cloth and other ...
-
Manufactured by Constant Internationalbased in CANADA
BIO-D-FOAM WWS is a new generation defoamer specially designed to eliminate entrained air and surface foam in all pulp and paper mill applications including waste treatment ...
-
Manufactured by J Flow Controlsbased in USA
The KO Series API 600 wedge gate valve can be designed and manufactured either to API standard dimensions or DIN standard dimensions. Special requirements by the customer can be accommodated, please contact ...
-
Manufactured by Schurco Slurrybased in USA
The U Series has the same hydraulic performance profiles of their lined counterparts in the S and L Series, and can be applied on existing lined slurry pump installations using a conversion ...
-
Manufactured by Bionomic Industries Incbased in USA
The CycloPlus collector is an advanced cyclone design that offers high retained solid particulate collection as either a primary particulate device for dust removal or recovery or to act as a precleaning stage to reduce particulate loadings ahead of a fabric filter collector to increase fabric filter life, or wet scrubber and reduce scrubbing liquid blowdown. CycloPlus features a proprietary ...
-
Manufactured by A-T Controls, Inc.based in USA
A-T Controls Butterfly Valves cover a wide range of industries from General Purpose to Chemical, Food and Beverage, Pulp and Paper, Waste Water applications and more. The product line features many choices of seat, disc and stem materials which enable you to address a wide variety of applications and media. A-T Controls Butterfly Valves are designed to comply with MSS-SP-67 and API-609 and are ...
-
Manufactured by Jinan Always Machinery Co., Ltd.based in CHINA
Vibration screen, vibrating screen, flat screen, screen for stock preparation and pulping ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The SuperDrum™ is an automatic, self-cleaning microscreen filter designed for removal of suspended solids. Filtration opening sizes range from 10 microns to several hundreds of microns. Construction materials are chosen depending on water quality, with stainless steel, acid-proof steel, duplex steel, and FRP among the most common choices. The filter material can be constructed of either ...
-
Manufactured by Schurco Slurrybased in USA
Similar in design to the Schurco S Series (Warman® AH®), the L Series has the same rugged design features with higher efficiencies. It is offered fully lined with split outer casings. Schurco Slurry L Series pumps maintain the ruggedness and slurry handling capacity of the S Series, but with a wider range of flow-rates and lower life-cycle costs. Higher efficiency impellers make the L ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you