Emissions Data Equipment For Environmental Management Available In Slovenia
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Wide temperature range (650 to 1300°C) allows coverage of both main buffer growth and MQW growth. Measure deposition thickness with the additional reflectometer at 635 nm on the UVR 400. Adjustable emissivity, transmittance, and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
PremiumManufactured by ENVEAbased in FRANCE
The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific flow ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M305 blackbody calibration source combines portability with a wide temperature range, high emissivity, and high accuracy. Easily moved when needed — weighs only 25 kg (55 lb). High accuracy ±0.2% of reading ±1°C. High emissivity. Manufactured and tested to meet rigid quality control ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 340 is the ideal tool to confirm proper set-up and to identify emission problems before they get serious. Oxygen is the base sensor in all Testo 340 Analyzers. Simply add one, or up to three sensors for your specific job. This combustion analyzer can be configured in many ways for commissioning commercial boilers, testing engines in midstream gas pipelines, tuning industrial burners ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-100 dust tester is a self-developed portable extraction dust monitor, which mainly adopts measuring technology oflaser forward scattering. The key parts of the product are all imported. The tester extracts dust in stack(flue) into dust measuring chamber for measurement. It owns features of high sensitivity, long maintenance-free time, convenient installation, which be can widely applied in ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. The Series 3400 is designed to measure total gaseous mercury emissions, ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Digital pyrometer with fixed optics for non-contact temperature measurement of non-metallic surfaces or painted, coated or anodized metals between -32 and 900 °C. The Impac IN 5 plus series infrared thermometers are specially designed for non-contact temperature measurements on non-metallic surfaces and also on painted, coated or anodized metals. These instruments are digital pyrometers ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
The NIR-Borescope-640-EX is a short wavelength radiometric infrared borescope imaging camera for steam reformer and cracker tube continuous temperature measurement and furnace optimisation and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ProSens was specially developed to carry out reliable dust measurement on clean sides after ...
-
by Emitwisebased in UNITED KINGDOM
Procurewise enables you to equip suppliers at every stage of their sustainability journey to measure, reduce and report their emissions to you with ease. By collaborating with suppliers on this journey, you benefit from increased data transparency, leading to smarter procurement decisions that drive net zero forward without compromising quality or cost. ...
-
Manufactured by TSI Incorporatedbased in USA
The Series 6300 CA-CALC Compliance Protocol Exhaust Emissions Analyzers guide consultants and boiler service professionals through each step of the CTM-34 test protocol, provide mass emissions calculations of exhaust emissions and print reports on site. These features streamline the testing process so the user can complete periodic combustion testing quickly and with ensured accuracy. Additional ...
-
Manufactured by Osal Groupbased in TURKEY
ATARAY Monorail System is the World’s most advanced Monorail System in-vented and developed by TURKARGE Transport Co. over the past 20 years. ATARAY monorail system has many innovations, superiority and advantages compare to all existing urban transport systems in the World. The system is equipped with; the latest technology, micro-electronics, light-weight composite materials and ...
-
Manufactured by TEN Automotive Equipmentbased in NETHERLANDS
The UBT 3000 is the latest type of electronic RPM adapter in the UBT series. The UBT 3000 incorporates a vibration sensor counter and battery / alternator signal counter in one compact and modern ...
-
Manufactured by MONICO INC.based in USA
A protocol converter that allows customers to integrate aftermarket NOx sensors with their SCADA or control system via many different protocols. Features include real-time data logging, Mail Server, Sync Server, Time Manager, and Virtual HMI Web ...
-
Manufactured by ACS, Inc.based in USA
Advanced Control Systems is an experienced service and engineering group specializing in industrial and municipal automation, controls, and integration. We maintain a full staff of technicians and engineers that can create a solution for an existing problem or help design a system for the ground up. Specializing in Programmable Logic Controls (PLCs), Variable Frequency Drive (VFDs), and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you