emissions compliance Equipment available in Rhode Island

Available in Rhode Island| Near Rhode Island
23 Results found

We couldn't find any emissions compliance equipment in Rhode Island

Here is a list of results available in Rhode Island

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Environmental Management ×

  • Subcategory: Environmental Compliance ×

  • Keyword: emissions compliance ×

  • Available in: USA ×

  • Available in: Rhode Island ×

Land - Model 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.

E Instruments - Model F900 - Forklift & Small Engine Exhaust Gas Analyzer

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The F900 is a hand-held exhaust gas analyzer designed for safety testing, engine tuning, and emissions compliance testing for forklifts, propane burnishers & polishers, propane grinders, and other small engines.

E Instruments - Model E9000 - Advanced Transportable Emissions Analyzer

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The E9000 is an advanced transportable emissions analyzer that is a complete, portable tool for EPA compliance–level emissions monitoring of boilers, engines, and other combustion equipment.

Bryan Compliance+ - Model LX Series - Low Nox Water & Steam Boilers

by Bryan Boilers Div. - Bryan Steam LLC     based in Peru, INDIANA (USA)

Bryan hot water and steam boilers in dr, ab, rv and rw series are available as “lx” type with nox level of sub 30 ppm gas and reduced oil nox as standard. models to meet stricter emission levels down to 9 ppm are also available. sizes range from 350 mbh to 21,000 mbh (8 bhp to 500 bhp).

CMC SmartCEMS - Model SCCAMS - Compliance Assurance Monitoring Systems

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS Compliance Assurance Monitoring System is a complete system that provides continuous data recording and report generation compliant under U.S. EPA Compliance Assurance Monitoring (CAM) regulations. The system comes with a data acquisition component and is guaranteed to meet CAM and U.S. EPA standards for combustion turbines and ...

Catalyst Oxidation Systems

by Innova Global Limited.     based in Cambridge, ONTARIO (CANADA)

Innova's catalytic reduction systems destroy carbon monoxide (CO) and volatile organic compounds (VOCs) produced as by-products of incomplete combustion in the gas turbine exhaust stream.

Selective Catalytic Reduction Systems

by Innova Global Limited.     based in Cambridge, ONTARIO (CANADA)

Since 2009, Innova has delivered best-in-class SCR systems for gas turbine simple cycle applications.

Track Record Services

by Climate Bridge     based in London, UNITED KINGDOM

With well over 100 CDM projects to date, Climate Bridge has built one of the largest CER portfolios in the world. This represents emission reductions in excess of 80 million tonnes of CO2e.

Energy and Climate Report

by Bloomberg BNA     based in Arlington, VIRGINIA (USA)

Energy and Climate Report provides current, thorough coverage of clean energy, efficiency, and climate change legislation, regulation, policy, legal developments, and trends in the U.S. and internationally.

Aspharia Systems

by OCM CLIMA srl     based in Fusignano, ITALY

Aspharia is a system that represents the best technology available today. It is designed to confine, capture, convey and treat diffuse emissions, which spread during the bituminous conglomerates production cycle and to ensure a high environmental protection, in full compliance with the provisions of the Directive 2010/75/EU and the general ...

CataStak - Model SCRs Series - Watertube Boilers

by Nationwide Boiler Inc.     based in Fremont, CALIFORNIA (USA)

With emission limits continuing on a downward trend, the Nationwide Boiler CataStak SCR System is the choice for ultra low NOx emissions compliance. After years of field testing on numerous rental projects, selective catalytic reduction was recognized as the one solution that met all of Nationwide Boiler's objectives: It was economical, reliable, ...

EMACT - Environmental Management And Compliance Tool

by ForJenn Environmental, LLC     based in Freeburg, ILLINOIS (USA)

“No other software gives you this powerful emission calculation ability combined with the extensive reporting in one centralized environmental management system.” One of the most daunting tasks facing any manufacturing company in the United States is environmental compliance. The constantly changing regulations along with the ...

CMC SmartCEMS - Model SCS - Server Package

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS Server package is a set of software tools and a platform to gather PEMS data from various sources such as CMC’s SmartCEMS PEMS Analyzer, Continuous Parametric Monitor, Alternative Emission Monitor, and Compliance Assurance Monitor and from remote connected hardware devices such as CMC’s Remote Terminal Unit. The system ...

FilterSense - Compliance and Optimization Systems

by FilterSense     based in Beverly, MASSACHUSETTS (USA)

FilterSense systems combine project planning, sensors, controls, operator HMI, SCADA, reporting software, full documentation, training, and support into a total solution for critical industry needs such as EPA compliance and plant optimization for process control, energy savings, and maintenance reduction.

CFC Solutions for Reducing Refrigerant Emissions

by EOS Climate     based in San Francisco, CALIFORNIA (USA)

EOS Climate is a pioneer in developing market-based solutions to reduce emissions of high global warming gases and driving the transition to climate-friendly technologies. To learn about partnering with EOS and earning money for CFCs.

Woodward - Model E3 - Rich-Burn Gas Engine Control System

by Woodward, Inc.     based in Fort Collins, COLORADO (USA)

Keeping your natural gas engine in compliance is a fact of life for anyone operating a natural gas fueled reciprocating engine. Emission compliance adds costs to the maintenance of rich burn natural gas engines. Woodward’s E³ Rich Burn air to fuel ratio (AFR) control system for natural gas engines minimizes the resources needed to meet ...

Refined Polishing System (RPS)

by Cambridge EnTech     based in Cambridge, MARYLAND (USA)

The Refined Polishing System (RPS) is an innovative new particulate control device that offers great versatility and flexibility to end-users.  The RPS was originally developed as a compact, cost effective, add-on particulate matter screen for the coal-fired power market.  The system enables power plants to achieve compliance with the ...

Right-To-Know Planning Guide

by Bloomberg BNA     based in Arlington, VIRGINIA (USA)

Performing state-by-state comparisons has been made much more easy and immediate with the addition of a new tool: the Right-to-Know Chart Builder. Developed based on feedback from current customers, the Right-to-Know Chart Builder enables users to create custom compliance charts comparing state requirements from the Emergency Planning and ...

Flaring Solutions for the Midstream Oil and Gas industry - Railroad Loading Combustor

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

The transportation of oil via railcar is proving to be a cost-effective method for moving bulk cargo. However, as the move to rail gains momentum, it is imperative for companies to examine the need for enclosed combustion systems. Because railcars are tanks, the emissions produced during the loading process are regulated. ABUTEC enclosed flares ...

Siemens - Model SGT-800 - Gas Turbines

by Siemens Energy, Inc.     based in Erlangen, GERMANY

The Siemens SGT-800 industrial gas turbine combines a reliable robust design with high efficiency and low emissions. This makes the SGT-800 an excellent choice for Industrial, Refinery and Oil & Gas applications in simple cycle, cogeneration or combined cycle installations. Over 165 units have been sold worldwide and have accumulated 2 million ...

Need help finding the right suppliers?

Let the XPRTs do the work for you